Loading...
Search for: carbon-monoxide
0.008 seconds
Total 49 records

    Study of Tehran Air Pollutants Dispersion with CMAQ Modeling System

    , M.Sc. Thesis Sharif University of Technology Hashemian Nezhad, Babak (Author) ; Arhami, Mohammad (Supervisor)
    Abstract
    Tehran air quality is facing a real crisis. Reports of pertinent organizations show air quality is deteriorating in recent years and unhealthy days are increasing. As a result, study and planning in order to change this trend and moving toward improving air quality is a necessity. On the other hand, in order to make proper decisions and choosing effective approaches considering cost-effective attribute and legal, temporal and budget restrictions, selecting the right tool is essential. Air quality models are the tools which in a cost saving manner and reasonable time can provide the required results for researchers, decision makers and legislators. An applicable model correspondent with urban... 

    Exposure Level of Vehicle Cabins to Particulate Matter and Gaseous Contaminations: Experimental Investigation and Theoretical Modeling of Influential Factors

    , M.Sc. Thesis Sharif University of Technology Saemian, Peyman (Author) ; Arhami, Mohammad (Supervisor)
    Abstract
    Mobile Sources are the main source of air pollutant emission in Tehran, the capital city of Iran. Everyday thousands of vehicles commute in roads and highways. Unfortunately, People are exposed to high level of particulate matter and gaseous contaminants in automobile cabins. Even though this environment is exposed to high pollutant concentration emitted by on-road vehicle, In comparison with other built environment, in-cabin commuter exposure and its key parameters has never been quantified. In general, this work entails measurement of in-cabin air quality, predicting mathematical models for calculating Air-Exchange-Rate (AER) in vehicles and on-road vehicle emission measurement. Our... 

    Analysis of CO Distribution in Large Tunnel Fires

    , M.Sc. Thesis Sharif University of Technology Sojoudi, Atta (Author) ; Farhanieh, Bijan (Supervisor)
    Abstract
    Fire events and the related toxicants such as CO are responsible for many fatalities inthe current century. These hazardous events are more dangerous when they occur in enclosedspaces. In the present study, a theoretical relation is developed for horizontal distribution of COin a large tunnel fire. Then, developed criterion is used to study the effect of rudimentaryparameters such as Heat Release Rate (HRR) of fire and tunnel Aspect Ratio (AR) on CO andtemperature stratification. Theoretical results of various heat release rates and aspect ratios forhorizontal distribution of CO are compared with numerical results using Fire DynamicsSimulator (FDS5.5). It is found that big fires have higher... 

    Simulation of Hydrocarbon Waste-gas Combustion in Incinerator and Pollution Control

    , M.Sc. Thesis Sharif University of Technology Modarres, Mohammad Reza (Author) ; Darbandi, Masoud (Supervisor)
    Abstract
    Emission control, especially Carbon Monoxides (CO) as one of the major by-products of combustion processes, is one of the most serious challenges in burning waste-gases with high amounts of humidity and Carbon Monoxide. We investigated an oil waste-gas incinerator serving to a bitumen production line located in Pasargad Oil Company, Shazand, Arak, Iran. The aforementioned incinerator was criticized seriously for its high CO emissions. We were requested to find a solution to reduce the undesirable CO emission from that. Following the environmental standards, there is an upper limit of 150 ppm for the CO produced by an industrial waste oil incinerator. To present an inclusive solution for such... 

    Development of an Analytical Framework for Evaluation of Climate Change Mitigation Policies on Iran’s Energy Security

    , M.Sc. Thesis Sharif University of Technology Eshraghi, Hadi (Author) ; Maleki, Abbas (Supervisor)
    Abstract
    Climate change and energy security are key drivers for future energy policy. While energy security has been a pillar of energy policy for about a century, concern about climate change is more recent and is bound to radically change the landscape of energy policy. Policy makers are now under increasing pressure to address these twin challenges: to develop cost-effective policies that will both ensure the security of our energy system and reduce greenhouse gas emissions.
    Main Effort in this Project is to construct an integrated model of Iran’s energy system to serve as a policy analysis tool, by which policymakers are able to identify the future effects of a wide range of policies in... 

    Study of Carbon Monoxide Emission and Dispersion in Long Motorway Spaces: A Case Study of Tohid Tunnel

    , M.Sc. Thesis Sharif University of Technology Alizadeh Aliabadi, Hamzeh (Author) ; Vaziri, Manouchehr (Supervisor)
    Abstract
    Vehicular tunnels are very prone to excess of air pollution due to their enclosed nature. Inadequate ventilation combined with high traffic flow result in elevated concentration of vehicle-induced air pollutants, which can pose serious health hazards. This study was carried out in the longest vehicular tunnel in Tehran, locally referred to as Tohid tunnel. Traffic flow characteristics, carbon monoxide level and it's dispersion along the tunnel were investigated in this project. Data were collected in 4 days and 3 times a day, 7-8 in the morning, 11-12 and 17-18 in the evening. Measurements were conducted at fixed locations, outside the tunnel,... 

    Investigation of Performance and Improvement of the Activity of MOF-based Catalysts in CO Oxidation Reaction

    , Ph.D. Dissertation Sharif University of Technology Abbasi, Fatemeh (Author) ; Ghotbi, Cyrus (Supervisor) ; Karimi Sabet, Javad (Supervisor)
    Abstract
    Different catalysts have been proposed for CO oxidation reaction and still many researches are performed to obtain a catalyst with high activity and stability. In this study, MOFs of CuBTC, MIL-101(Cr), and NH2-MIL-101(Cr) and active metal of Pd have been selected and their performances have been investigated in CO oxidation reaction. MOFs have been synthesized by hydrothermal method. Pd loading has been performed by impregnation method in various pH and in aqeous palladium nitrate solution and palladium nitrate solution in nitric acid. To reveal the effect of the nature of noble metal, activity of 1% Pt/MIL has been investigated. Amine-functionalized MIL-101(Cr) has been synthesized by... 

    Evaluating the Levels of Air Pollutants and Their Affecting Factors in Highways of Tehran

    , M.Sc. Thesis Sharif University of Technology Nayebyazdi, Mohammad (Author) ; Arhami, Mohammad (Supervisor)
    Abstract
    The concentration of air pollutants in the environment is variable according to different factors, including distances from main sources. Vehicles in streets and highways are one of the most important sources of the air pollutants. Hemmat highway is one of the most significant highways in Tehran with traffic congestion of 15000 to 18000 vehicle/hour. In this research, the concentrations of PM10 and CO were determined in different distances of Shahid Hemmat highway and the relationship diagrams of traffic and meteorology to the amount and emission of air pollutants were drawn. The concentration gradient diagrams showed exponential decay, which demonstrated that more than of 50% of air... 

    Study of Change of Thermochemical Properties of DNA bases in the Presence of Neutral, Anionic, and Radical Species

    , M.Sc. Thesis Sharif University of Technology Mottaghizadeh, Ayda (Author) ; Fattahi, Alireza (Supervisor)
    Abstract
    Since we are exposed to many air pollutants such as different gases daily, this project has attempted to investigate how these gases affect nucleobases, which are the main constituent of the DNA chain. The gases used in this study are sulfur dioxide (SO2), carbon monoxide (CO) and nitric oxide (NO). Each of these gases was studied separately along with the most stable nucleobase in the neutral, anionic and cationic states. The AT and GC base pairs were also exposed to each of these gases and changes (for exampl, the acidity, proton affinity) created in the AT and GC base pairs were examined.The most important properties studied during this project include gas-nucleobase interactions, proton... 

    Exposure Level of Vehicle Cabins to Particulate Matter and Gaseous Contaminations: Experimental Investigation and Theoretical Modeling of Influential Factors

    , M.Sc. Thesis Sharif University of Technology Delavarrafiee, Maryam (Author) ; Arhami, Mohammad (Supervisor)
    Abstract
    Mobile Sources are the main source of air pollutant emission in Tehran, the capital city of Iran. Everyday thousands of vehicles commute in roads and highways. Unfortunately, People are exposed to high level of particulate matter and gaseous contaminants in automobile cabins. Even though this environment is exposed to high pollutant concentration emitted by on-road vehicle, In comparison with other built environment, in-cabin commuter exposure and its key parameters has never been quantified.
    In general, this work entails measurement of in-cabin air quality, predicting mathematical models for calculating Air-Exchange-Rate (AER) in vehicles and on-road vehicle emission measurement. Our... 

    Strain Effect on the CO & H2 Adsorption Upon Graphene

    , M.Sc. Thesis Sharif University of Technology Bagheri, Beytolhoda (Author) ; Irajizad, Azam (Supervisor)
    Abstract
    In this thesis, adsorption of Carbon monoxide and Hydrogen on graphene, by DFT calculation has been studied. Also effect of strain on some electrical properties, such as band structure, electrical conductivity and Density of states, for pristine graphene and adsorption CO and H2 on it has been probed. This results show that with strain up to 12% on pristine graphene , we won’t have any band gap on Fermi surface and energy adsorption for Carbon monoxide on strained graphene (up 12%) increase up 400 per cent. Also for strained graphene (12%) on Carbon monoxide adsorption condition we will have energy band gap almost a few electron volt on Fermi surface. In general this results express... 

    Three-dimensional superconvergent patch recovery method and its application to data transferring in small-strain plasticity

    , Article Computational Mechanics ; Volume 41, Issue 2 , 2008 , Pages 293-312 ; 01787675 (ISSN) Gharehbaghi, S. A ; Khoei, A. R ; Sharif University of Technology
    Springer Verlag  2008
    Abstract
    In this paper, a 3D Superconvergent Patch Recovery (SPR) method is developed for data transferring in elasto-plasticity. The transfer operators are presented for mapping of the state and internal variables between different meshes. In order to transfer the history-dependent variables from old mesh to new one, the internal variables are firstly mapped from the Gauss points to nodal points of old mesh, the variables are then transferred from nodal points of old mesh to nodal points of new mesh, and the values are finally transferred from the nodal points to Gauss points of new mesh. As the solution procedure cannot be re-computed from the initial state, it is continued from the previously... 

    Theoretical study of hybrid TEA-CO2 lasers

    , Article Optics and Laser Technology ; Volume 40, Issue 6 , September , 2008 , Pages 779-784 ; 00303992 (ISSN) Khosravi, H ; Bahrampour, A. R ; Bahari, A ; Farrahi, R ; Daneshfar, N ; Sharif University of Technology
    2008
    Abstract
    Temporal and spatial analysis of dynamics of hybrid transversely excited atmospheric pressure (TEA)-CO2 lasers is studied using two different models with four and eight energy levels. These models are used for simulation of the laser and computing the output energy. Effects of several parameters such as input energies and gas mixture concentrations (especially presence of CO molecules) are also studied. © 2007 Elsevier Ltd. All rights reserved  

    The effects of baffle plate on soot nano-aerosol and pollutant productions in a JP-fueled combustor

    , Article 54th AIAA Aerospace Sciences Meeting, 2016, 4 January 2016 through 8 January 2016 ; 2016 ; 9781624103933 (ISBN) Darbandi, M ; Ghafourizadeh, M ; Schneider, G. E ; Sharif University of Technology
    American Institute of Aeronautics and Astronautics Inc, AIAA  2016
    Abstract
    In this paper, the effects of a baffle plate on flame deflection and its throttling are investigated numerically in a combustor consuming jet propellant JP. We study the plate effects on the resulting soot volume fraction, soot particles diameter, mass fractions of carbon monoxide (CO), carbon dioxide (CO2), and benzene (C6H6). We use a two-equation turbulence model, a PAH-inception two-equation soot model imposing oxidation due to OH agents, a detailed chemical kinetic consisting of 121 species and 2613 elementary reactions, and the flamelet combustion model to perform the current study. We also take into account the turbulence-chemistry interaction using the presumed-shape probability... 

    Synthesis of dimethyl ether over modified H-mordenite zeolites and bifunctional catalysts composed of Cu/ZnO/ZrO2 and modified H-mordenite zeolite in slurry phase

    , Article Catalysis Letters ; Volume 129, Issue 1-2 , 2009 , Pages 111-118 ; 1011372X (ISSN) Khandan, N ; Kazemeini, M ; Aghaziarati, M ; Sharif University of Technology
    2009
    Abstract
    Synthesis of dimethyl ether (DME) via methanol dehydration were investigated over various catalysts, and via direct CO hydrogenation over hybrid catalysts composed of Al-modified H-Mordenite zeolite and Cu/ZnO/ZrO 2. H-Mordenite zeolite exhibited the highest activity in dehydration of methanol. However, its selectivity toward dimethyl ether was rather low. For this reason, the H-Mordenite was modified. Modification of zeolites was performed by wet impregnation method and considered catalysts were characterized by AAS, XRD and NH3-TPD analyses. Results of catalytic tests indicated that H-Mordenite modified with 8 wt% aluminum oxide was the best catalyst for synthesis of dimethyl ether from... 

    Sustainable ammonia production from steam reforming of biomass-derived glycerol in a heat-integrated intensified process: Modeling and feasibility study

    , Article Journal of Cleaner Production ; Volume 324 , 2021 ; 09596526 (ISSN) Khademi, M. H ; Lotfi Varnoosfaderani, M ; Sharif University of Technology
    Elsevier Ltd  2021
    Abstract
    Currently, ammonia, as a clean and sustainable energy carrier, is intensively synthesized from its elements during the Haber-Bosch technology. This process requires a large amount of energy and emits numerous amounts of carbon dioxide, because hydrogen is dominantly produced from fossil fuels through reforming processes. Biomass-derived glycerol steam reforming is an attractive alternative to traditional reforming for reducing the dependence on hydrocarbon resources and mitigating climate change. This research aims to intensify a heat-integrated process for the co-production of ammonia and syngas from glycerol valorization. In this process, glycerol reforming continuously provides hydrogen... 

    Supercritical gasification of biomass: Thermodynamics analysis with Gibbs free energy minimization

    , Article Energy Sources, Part A: Recovery, Utilization and Environmental Effects ; Volume 34, Issue 2 , Dec , 2011 , Pages 163-176 ; 15567036 (ISSN) Hemmati, Sh ; Pazuki, G. R ; Vossoughi, M ; Saboohi, Y ; Hashemi, N ; Sharif University of Technology
    2011
    Abstract
    Gasification of biomass in supercritical water is a successful technology for hydrogen production especially by using wet biomass. The whole process, from feeding to purification of hydrogen, consists of a lot of equipment, such as pumps, heat exchangers, heaters, reactors, etc. Because the main reactions take place in the gasification reactor, the gasifier is the most important equipment of the process. In this article, a thermodynamic model, including chemical equilibrium in the reactor that is based on Gibbs free energy minimization, is developed to estimate equilibrium composition for gasification of biomass in supercritical water for hydrogen production. For this analysis, we use three... 

    Production of perovskite catalysts on ceramic monoliths with nanoparticles for dual fuel system automobiles

    , Article International Journal of Environmental Science and Technology ; Volume 6, Issue 1 , 2009 , Pages 105-112 ; 17351472 (ISSN) Khanfekr, A ; Arzani, K ; Nemati, A ; Hosseini, M ; Sharif University of Technology
    CEERS  2009
    Abstract
    (Lanthanum, Cerium)(Iron, Manganese, Cobalt, Palladium)(Oxygen)3- Perovskite catalyst was prepared by the citrate route and deposited on ceramic monoliths via dip coating procedure. The catalyst was applied on a car with XU7 motors and the amount of emission was monitored with vehicle emission test systems in Sapco company. The results were compared with the imported catalyst with noble metals such as palladium, platinum and rhodium by Iran Khodro company based on the Euro III standards. The catalysts were characterized by specific surface area measurements, scanning electron microscopy, X-ray diffraction, line scan and map. In the results, obtained in the home made sample, the amount of... 

    Process integration of membrane reactor for steam methane reforming for hydrogen separation with CO2 capture in power production by natural gas combined cycle

    , Article 9th International Conference on Greenhouse Gas Control Technologies, GHGT-9, Washington DC, 16 November 2008 through 20 November 2008 ; Volume 1, Issue 1 , 2009 , Pages 279-286 ; 18766102 (ISSN) Najmi, B ; Soltanieh, M ; US Department of Energy ; Sharif University of Technology
    2009
    Abstract
    In this paper simulation results for integration of CO2 pre-combustion capture by steam methane reforming (SMR) in membrane reactors (MR) with natural gas fired combined cycle (NGCC) power plants are presented. The integrated combined cycle was simulated by GTPRO (Thermoflow) simulator along with the results from simulation of membrane reactor for SMR process developed in this work. The results show that the overall efficiency of the integrated combined cycles decreased due to the energy required for SMR process. On the other hand, by integration of MR in combined cycles, emissions of CO2 to the atmosphere can be avoided. © 2009 Elsevier Ltd. All rights reserved  

    Predicting hourly air pollutant levels using artificial neural networks coupled with uncertainty analysis by Monte Carlo simulations

    , Article Environmental Science and Pollution Research ; Volume 20, Issue 7 , 2013 , Pages 4777-4789 ; 09441344 (ISSN) Arhami, M ; Kamali, N ; Rajabi, M. M ; Sharif University of Technology
    2013
    Abstract
    Recent progress in developing artificial neural network (ANN) metamodels has paved the way for reliable use of these models in the prediction of air pollutant concentrations in urban atmosphere. However, improvement of prediction performance, proper selection of input parameters and model architecture, and quantification of model uncertainties remain key challenges to their practical use. This study has three main objectives: to select an ensemble of input parameters for ANN metamodels consisting of meteorological variables that are predictable by conventional weather forecast models and variables that properly describe the complex nature of pollutant source conditions in a major city, to...