Sharif Digital Repository

The study of water hammer in air-water, two-phase flows in hydraulic structures such as pressurized pipelines and tunnels, siphons, culverts, and junctions is of great importance for design purposes. Water hammer if combined with a periodic slug flow would lead to severe periodic transient pressure fluctuations inside the conduit. Laboratory experiments have been conducted to investigate waterhammer pressure inside a horizontal rectangular conduit carrying a two-phase, air-water slug flow. Tests were performed in an experimental apparatus comprising a 6.8-m-long transparent pipeline 0.06 m wide and 0.1 m high. By rapidly closing a control gate at the end of the conduit, propagating pressure... 

This study investigates the influence of viscous dissipation on thermal transport characteristics of the fully developed combined pressure and electroosmotically driven flow in parallel plate microchannels subject to uniform wall heat flux. Closed form expressions are obtained for the transverse distributions of electrical potential, velocity and temperature and also for Nusselt number. From the results it is realized that the Brinkman number has a significant effect on Nusselt number. Generally speaking, to increase Brinkman number is to decrease Nusselt number. Although the magnitude of Joule heating can affect Brinkman number dependency of Nusselt number, however the general trend remains... 

Titanium carbonated hydroxyapatite (Ti/CHA) nanobiocomposites have extensive biological applications due to the excellent biocompatibility and similar characteristics to the human bone. Ti/CHA nanobiocomposite has good biological properties but it suffer from diverse characteristics especially in hardness, Young's modulus, apparent porosity and relative density. This investigation is an attempt to propose the predictive models using gene expression programming (GEP) to estimate these characteristics. In this regards, GEP is used to model and compare the effect of practical variables including pressure, Ti/CHA contents and sintering temperature on their monitored properties. To achieve this... 

Dissolved air precipitation/solvent sublation (DAP/SS) was used for treatment of simulated and real oilfield produced water to generate very fine bubbles which are necessary for effective separation. In this method micro bubbles produced by saturation of air in a pressurized packed column were released in an atmospheric column leading the bubbles to raise resulting trapped contaminants in the Gibbs layer around them to be removed by a layer of immiscible solvent at the top of column. The method was conducted to solutions including Benzene, Toluene and Chlorobenzene (ClB) as part of BTEX contaminants in produced water, mixture of them as simulated produced water and real oilfield produced... 

Water inside carbon nanotubes as an example of nanoconfined water has gained noticeable attention, in both theoretical and applied aspects. Molecular simulation has played a major role in the studies in this field. Yet, there is a need for systematic study of simulation results and compilation of scientifically reliable predictive relations. Here we present Monte Carlo simulations of water inside carbon nanotubes with different radii. An equation of state which was derived on the basis of the extended Lennard-Jones (12,6,3) as the effective pair potential is chosen for the system of water inside the carbon nanotubes. The equation of state is modified to take the effects of anisotropic... 

Two new correlation functions with three adjustable parameters for the calculation of thermal conductivity of gases, liquids, and refrigerants over wide temperature-pressure ranges are presented. It is shown that by using suitable mathematical expressions for the correlation functions, the number of adjustable parameters can be limited to three, which is less than for similar functions. The average and maximum deviation of the correlation compared with the measured data is about 1% and 8%, respectively  

An analytical solution is presented to study the heat transfer characteristics of the combined pressure - electroosmotically driven flow in planar microchannels. The physical model includes the Joule heating effect to predict the convective heat transfer coefficient in two dimensional microchannels. The velocity field, which is a function of external electrical field, electroosmotic mobility, fluid viscosity and the pressure gradient, is obtained by solving the hydrodynamically fully-developed laminar Navier-Stokes equations considering the electrokinetic body force for low wall zeta potentials. Then, assuming a thermally fully-developed flow, the temperature distribution and the Nusselt... 

Wettability alteration is the principal low-salinity-effect (LSE) in many oil-brine-rock (OBR) systems. Our recent experimental results have demonstrated that wettability alteration by low salinity is slow. It is expected that the electrical behavior of oil/brine and rock/brine interfaces and the water film geometry control both the transient hydrodynamic pressure, and the time-scale of ionic transport in the film, thus the kinetics and degree of wettability alteration. In this paper, the electro-diffusion process induced by the imposed ionic strength gradient is simulated by solving Poisson-Nernst-Planck equations in a water film bound between two charged surfaces, using a finite... 

The physical processes responsible for bubble formation in microchannels are not well understood and lack fundamental understanding. Experimental results are not exactly in agreement with each other and there are no definite theories to explain the possible effects of different parameters. Among different parameters the microchannel hydraulic diameter can affect the bubble formation mechanism in microchannels strongly. In this paper the effect of the time dependent pressure difference between inside and outside of the bubble on bubble dynamics in microchannels have been investigated. The source of this time dependency can be the emergence of bubble embryos which produces a density... 

We have studied the effect of negative chemical pressure in the RuGd 1.5(Ce 0.5-xPr x)Sr 2Cu 2O 10-δ with Pr content of 0.0 ≤ x ≤ 0.2. This is also investigated using the bond length results obtained from the Rietveld refinement analysis. The c parameter and cell volume increase with x for 0.0 ≤ x ≤ 0.15. The width of the resistivity transition also increases with Pr concentration, indicating higher inhomogeneity and oxygen deficiency. The difference in the ionic valences of Pr 3+,4+ and Ce 4+ causing different hole doping, the difference in the ionic radii, and oxygen stoichiometry affect the superconducting transition. The magnetoresistance shows a cusp around 135 K which lies between the... 

The majority of the city of Tehran, Iran has been developed on cemented coarse-grained alluvium. In order to understand the mechanical behavior of this soil, a series of triaxial compression tests (CD, CU) were performed on uncemented and artificially cemented samples. Hydrated lime was used as the cementation agent for sample preparation to model the Tehran cemented deposit. The tests were performed on artificially cemented samples after an appropriate curing time. The effect of confining pressure, cement content and fine content is investigated in this research. The tests results show that peak shear strength is followed by strain softening for all cemented samples. Shear strength... 

Crude oil reservoirs have different temperatures, compositions, and pressures, therefore oil recovery performance by CO2 injection varies from one case to another. Furthermore, it is predicted that lower interfacial tension between injected CO2 and reservoir fluid results in more oil recovery. In this study, we investigate the effect of temperature on the equilibrium interfacial tension between CO2 and three different oil fluids at different pressures. Also minimum miscible pressure (MMP) is measured by the vanishing interfacial tension (VIT) technique to determine the temperature effect on the CO2 miscible gas injection. The results on different pure and mixtures of hydrocarbon fluids show... 

Synthesis of dimethyl ether (DME) via methanol dehydration were investigated over various catalysts, and via direct CO hydrogenation over hybrid catalysts composed of Al-modified H-Mordenite zeolite and Cu/ZnO/ZrO 2. H-Mordenite zeolite exhibited the highest activity in dehydration of methanol. However, its selectivity toward dimethyl ether was rather low. For this reason, the H-Mordenite was modified. Modification of zeolites was performed by wet impregnation method and considered catalysts were characterized by AAS, XRD and NH3-TPD analyses. Results of catalytic tests indicated that H-Mordenite modified with 8 wt% aluminum oxide was the best catalyst for synthesis of dimethyl ether from... 

Supersonic separators are used in gas separation processes such as dehumidification of humid air due to high performance and its good pressure recovery. In the present study, a comprehensive numerical and experimental investigation on the hydrodynamic behavior of air as working fluid and dehumidification performance of supersonic separator have been accomplished. The effect of the operational parameters on shockwave's position are examined. The outcomes show that by increasing the pressure level of supersonic separator, relative error between numerical and experimental results decreases from 20% to less than 10%. The effect of the operational parameters and humidity of inlet air on the... 

In this work, the vapour extraction (VAPEX) process is studied experimentally in a rectangular physical model at moderate-high pressure. The solvent was either pure propane or a mixture of propane/ methane with different compositions. The solvent and carrier gas were totally mixed before injection, so that a solvent with the desired composition flowed through the injector during experiments, and the solvent mixture was in thermodynamic equilibrium before injection into VAPEX cell. Effects of pressure and composition of solvent were studied. Results showed that at a fixed pressure, the process is more effective with pure solvent compared to the use of solvent mixtures. The main feature of...