Sharif Digital Repository

The Fe-Ni-Co alloy to borosilicate glass seals have been used for many years as hermetic and electrically insulating seals. It is not only excellent in thermal expansion matching but also in good wettability and bond strength too. Oxidation of Kovar was performed in Water vapor, Saturated Nitrogen and N2-H2-H2O atmosphere in tube furnace. Oxide layer composition and thickness changed by varying in oxidation temperature and time. XRD analysis showed different Iron oxides in oxide layer, FeO, Fe3O4 and Fe2O3. However in the third atmosphere no Hematite observed. Increasing oxidation temperature and time result in increasing sample weight gains and roughness. Oxide layer microstructure also was... 

In the upcoming research, with the aim of bone tissue engineering and achieving a new structure, a scaffold based on polyhema (PHEMA) and gelatin (Gel), which are biocompatible polymers for bone tissue, was made and evaluated. Also, in order to improve the bioactivity and mechanical properties, bioactive glass alone (BG45S5) or together with strontium (BG-Sr) was used in the scaffold structure. and chemical by conducting FTIR, XRD, SEM, mechanical strength, bioactivity measurement, contact angle, water absorption and degradation tests. Biological investigations were done using mesenchymal stem cells derived from human bone marrow and with the help of MTT evaluations and SEM photography. The... 

In this work, we have used a 3D printer and unidirectional ice-templating technique in conjunction, to fabricate a novel composite scaffold to facilitate local osteochondral defects tissue regeneration with a cell-free approach. Using ice-templating to induce radially-aligned porosity formation in type I bovine collagen is known to expedite host cells' migration into the scaffold which their ECM secretion shifts cellular milieu toward that of its neighboring tissue layer. We used numerical analysis to design and optimize appropriate freeze-casting mold, finding the optimum value for pin height and metal slab depth to be 4mm and 14mm, respectively. Collagen content equivalent to 2%w/v was... 

Considering the operation of the current nuclear reactors and the country's policy to achieve 10,000 megawatts of nuclear power in the horizon of 1420, as well as the construction of research reactors, we will face a huge amount of radioactive waste in the coming years. Meanwhile, spent ion exchange resins constitute a large amount of low and intermediate level (LILW) solid radioactive waste produced from the nuclear industry. Therefore, appropriate precautionary measures should be taken for the immobilization and disposal of these radioactive wastes in order to ensure the sustainable development of the nuclear industry and the protection of the environment and human health. In this study,... 

Wound healing is a complex and regular process. It makes more challenge when the volume of wound exudate becomes uncontrollable. To solve this problem, hydrofiber wound dressings which contain carboxymethyl cellulose fibers are being used. Fast absorption and keeping the moisture in balance specially in chronic wounds, is one of the major features of hydrofiber wound dressings. In this research, which was conducted with the aim of investigating the synergy effect of active glasses and Hydrofiber commercial wound dressing for the healing of skin wounds, especially chronic wounds, the sol-gel method has been used to synthesize bioactive glasses based on borosilicate, replacing a part of CaO... 

In order to prevent electrostatic attraction on non-conductive surfaces, the most practical solution is to put antistatic coatings to reduce surface resistance. Nano tin oxide coatings are designed to produce surfaces with antistatic properties in the resistance range of 108-1012 Ω/cm. In this project, using a simple method, low temperature, without heat treatment and without the use of additive (dopant), tin oxide films with antistatic property were placed on the glass. Further, in order to obtain a coating with a suitable morphology and structure to increase the surface conductivity, the synthesis of tin oxide using the sol-gel method at ambient temperature was used. And to place the... 

PMMA bone cement lacks biodegradability and the ability to bond with surrounding bone tissue. Therefore, the development of a new generation of bioactive bone cements that are biodegradable and possess adequate mechanical properties as well as desirable setting time is receiving remarkable interest.In this study, we have developed novel mineral-based bioactive bone cements. Our mineral bioactive bone cements were composed of Calcium Sulfate Hemihydrate, Bioactive Glass, and Tricalcium Silicate. Firstly, a binary system composed of Calcium Sulfate Hemihydrate and Bioactive Glass was optimized based on mechanical and setting behavior. Secondly, Tricalcium Silicate was added to the powder phase... 

Concrete-filled FRP tubes have gained popularity among structures in areas with harsh environmental condition. Despite their unique material properties such as resistance to corrosion, noticeable axial stiffness, and durability, FRP materials have poor resistance to elevated temperatures. This paper presents numerical investigations on the behavior and capacity of concrete-filled pultruded GFRP tubes (CFGFTs) after exposure to elevated temperatures under concentric compression. Variables in this study were the tube’s thickness of 3, 5, and 7mm, the infill concrete’s compressive strengths of 30 and 60MPa, and the exposure temperature of 25, 100, 200, 300, and 400°C. The results in this study... 

The repair of pipes that deteriorate over time or due to various factors is a critical issue in engineering. Consequently, effective and novel repair methods, especially using FRP (Fiber-Reinforced Polymer) composites, have gained significant importance. In this research, the repair and connection of pipes using FRP are examined. In the pipe repair section, through hydrostatic testing, various factors such as the damaged area, the number of sharp corner points, the width of the sheets, the number of layers, and the pre- stress condition of the FRP are studied for their impact on the pipe's ultimate pressure tolerance. Also, in the pipe connection section, with hydrostatic tests, the ultimate... 

Increasing of human demanding for energy and limiting of fossil fuels and bio-logical problems, it seems necessary to access new and clean source of ener-gy. For instance, one of these sources of energy is sun. If we can impart from this infinite energy source so health and natural life can be pictured for human. Nanostructure dye sensitized solar cells in compare with other photovoltaic cells are more economical and practical as a result of lower material cost and simpler manufacturing process. In general, a typical dye sensitized solar cell is a sandwich structure based on two transparent conducting oxide (FTO) glasses. The FTO glass substrates are expensive and account for most of... 

In order to prevent deterioration of metallic interconnects in solid oxide fuel cells (SOFC), while interacting with glass-ceramic sealant, a nickel electroplated ferritic stainless steel (UNS 430) was used. After applying a layer of powdered glass (SiO2-B2O3-Al2O3-Na2O-BaO-K2O) with thickness around 300-450 μm on the ferritic stainless steel sheets with dimansion of 0.5 × 60 × 60 mm and 0.5 × 10 × 10 mm, samples were heated at temperatures between 770-850 °C and durations of 1 to 15 hours. To evaluate the effect of the Ni layer, two types of sample (only sanded and only electropolished) were also submitted to the same process, and their results were compared with the coated samples. XRF,... 

bulk metallic glass Unlike metal materials that have a crystalline structure, amorphous glass is an amorphous material with an irregular atomic structure that simultaneously has the same physical properties as metals. Due to the absence of crystal defects such as dislocation and grain boundaries, these materials show unique mechanical properties such as high strength and elastic strain, abrasion resistance and proper corrosion. However, their plastic deformation is heterogeneous, concentrated, and accompanied by sudden failure. Unlike metals, these materials do not have a long-range crystalline order, and their atomic structure includes short-range and mid-range order. The short-range order... 

In recent years, desulfurization has received much attention due to its devastating environmental effects. The existence of sulfur compounds has effects such as corrosion, poisoning of catalysts, reduction of heat of combustion and reduction of price. Sulfur compounds in hydrocarbon fuels also produce sulfur oxides caused by combustion then they enter the atmosphere, and cause acid rain. Acid rain dissolves building materials, poisons lakes, and destroys forests. Therefore, removing sulfur or converting it to less harmful substances is one of the most important processes in refineries. The method studied in this research is the use of adsorption desulfurization method by microchannel which... 

One of the novel methods of stabilization of nuclear waste is the use of vitrification technology. In order to stabilize high level wastes (HLLW) in glass, it is required that the elements are in their oxide form. Therefore, it is necessary to evaporate the waste and turn it into a solid form so that the elements can be converted into oxide form in the calcination furnace. Hence, one of the challenges of stabilization is the optimization of evaporation and calcination conditions. In this research, the parameters affecting evaporation were first investigated. Using laboratory measurements of application: temperature (110 to 180 °C), presence of nitric acid (0.5 to 4 mol/L), ratio of zirconium...