Sharif Digital Repository

The dissolution of plasma-sprayed hydroxyapatite (PHA) coatings with different characteristics, produced by various spraying conditions, in a Tris-buffered solution at pH 7.4 was experimentally studied through the measurement of the release of calcium ions. The phase composition of the coatings at surface and interface, and the porosity were evaluated. The analytical modeling revealed that the calcium dissolution process was composed of two stages. The first stage was found to be both surface and diffusion controlled. The second stage was an exactly diffusion-controlled dissolution. In the first stage, the rate of dissolution and the solubility of the coatings with minimum contents of... 

The high amount of base metals poses an important challenge in gold bioleaching from spent printed circuit boards (PCBs). This study aims to investigate the bioleaching of important base metals (Cu, Ni, and Fe) from a mixture of spent PCBs (E-waste) using adapted Acidithiobacillus ferrooxidans in the bubble column bioreactors. Firstly, the adaptation process is done from 1 to 15 g/L in Erlenmeyer flasks in 187 days, then the concentration of E-waste increased to 40 g/L in bubble column bioreactors in 44 days. The concurrent recovery of copper, nickel, and iron using adapted bacterium in a bioreactor was optimized by central composite design. Various effective parameters such as aeration... 

Carbon dioxide storage in geological formations is one of the mature strategies developed for controlling global warming. This paper represents a comprehensive experimental and geochemical modeling study to analyze CO2-brine-rock interactions in a carbonate rock containing calcite and dolomite minerals. PHREEQC geochemical package has been applied for modeling the geochemical reactions in the studied porous media. Firstly, dynamic experiments are performed to calibrate the geochemical model. Then, static experiments are conducted to study the geochemical reactions in the CO2-brine-rock interaction system. This study contributes to analyzing the precipitation-dissolution and ion exchange... 

Purpose. Drug release from nanosystems at the sites of either absorption or effect biophase is a major determinant of its biological action. Thus, in vitro drug release is of paramount importance in gaining insight for the systems performance in vivo. Methods. A novel in vitro in vivo correlation, IVIVC, model denoted as double reciprocal area method was presented and applied to 19 drugs from 55 nano formulations with total 336 data, gathered from literature. Results. The proposed model correlated the in vitro with in vivo parameters with overall error of 12.4 ± 3.9%. Also the trained version of the model predicted the test formulations with overall error of 15.8 ± 3.7% indicating the... 

There are increasing evidences that adjusting the chemistry of the injecting water improves the oil recovery efficiency. However, the underlying mechanisms for this technique which is referred to as "smart waterflood" have not yet been thoroughly understood. It is needed to explore the role of individual ions through set of different tests, to find the right mechanisms behind "smart waterflood". This study is focused on the fluid/solid (carbonate) interactions through systematic wettability measurement. Contact angle measurements accompanied by spontaneous imbibition tests were employed to determine the role of individual monovalent and divalent ions in wettability alteration process by... 

This work concerns observing the pressure as well as CO2 mole percentage effects on asphaltene molecular weight distributions at reservoir conditions. A high-pressure, high-temperature asphaltene measurement setup was applied, and the amount of precipitated asphaltene at different pressures as well as CO2 mole percentage in an Iranian heavy crude oil was measured. Moreover, the asphaltene molecular weight distributions during titration of crude oil with different n-alkanes were investigated. The gel permeation chromatography (GPC) apparatus was used for characterization of asphaltene molecular weight under different conditions. It has been observed that some thermodynamic changes such as... 

The globular structure of M2 high speed steel in the rolled - annealed and as cast conditions was investigated in the semisolid state. Metallographic observations resulted in globular austenite particles that were surrounded by a liquid phase. Dissolution of various carbides in the austenite phase at semisolid temperatures led to grain boundary liquation and formation of near-spherical solid grains in a liquid matrix. Therefore, at the semisolid state, the solid particles were free from carbides. MC-type and M6C-type eutectic carbides re-precipitated at the grain boundaries during cooling of the samples from the semisolid temperature. The variation of shape factor versus holding time and... 

Hydrogen storage capacities of raw, oxidized, purified and Fe-doped multi-walled carbon nanotubes (MWCNTs) were studied by electrochemical method. Based on transmission electron microscopy and Raman spectroscopic data, thermal oxidation removed defective graphite shells at the outer walls of MWCNTs. The analysis results indicated that the acid treatment dissolved most of the catalysts and opened some tips of the MWCNTs. Thermal gravimetric analysis and differential scanning calorimetry results illustrated that by oxidation and purification of MWCNTs, the weight loss peak shifts toward a higher temperature. N2 adsorption isotherms of the purified and oxidized MWCNTs showed an increase in N2... 

Crude oil desalter effluent from a Tehran oil refinery was treated by a hybrid UF/RO membrane separation process. Ultrafiltration (UF) was used primarily to remove the emulsified oil droplets followed by the removal of total dissolved solids (TDS) via reverse osmosis (RO). The UF membrane was a hydrophilic flat sheet polysulfone ultrafiltration membrane with MWCO of 100 kDa while the RO membrane was a spiral-wound thin-film composite polyamide. Effect of operating conditions such as transmembrane pressure and crossflow velocity were studied in UF pretreatment. The experimental results showed that the UF membrane removed more than 75% of the oil and can be considered as an effective... 

Hydroxyapatite (HAp) nanostrips were rapidly obtained during a mild microwave heating method. Applying microwave irradiation to Ca(NO3)2·4H2O/CTAB/Na2HPO4 precursor solution, the HAp precipitation process was occurred directly and without common crystallographic transformations including dissolution and slow recrystallization. The cationic surfactant CTAB was used as a soft template to modify nucleation and growth process. TEM investigations showed that the fabricated nanostrips had a width and length of about 10 and 55 nm, respectively. The X-ray diffraction pattern revealed that the fabricated well-crystallized and high purity hydroxyapatite nanostrips had a pattern similar to the bone... 

This paper focuses on the effect of deep cryogenic treatment (-196 °C) on microstructure and mechanical properties of AZ91 magnesium alloy. The execution of deep cryogenic treatment on samples changed the distribution of β precipitates. The tiny laminar β particles almost dissolved in the microstructure and the coarse divorced eutectic β phase penetrated into the matrix. This microstructural modification resulted in a significant improvement on mechanical properties of the alloy. The steady state creep rates were measured and it was found that the creep behavior of the alloy, which is dependent on the stability of the near grain boundary microstructure, was improved by the deep cryogenic... 

Dynamic hydrosalinity models are available, but are not used extensively on a large scale soil which receives wastewater from industrial areas, partly because adequate database are expensive to be obtained. Thus, for this reason, there is an urgent need to assess the salt and other pollutant loads collected in wastewater flows into the soil and/ or ground water systems. A conceptual hydrosalinity model was used on two major underlying principals of mass balance and steady state. This model was initially tested on the 4,117 km2 plains west of the Yazd-Ardakan district in the central part of Iran. This model was used at a time when the soil and ground water salinity problem was serious due to... 

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

Practical designs of non-aqueous phase liquids (NAPLs) remediation strategies require reliable modeling of interphase mass transfer to predict the retraction of NAPL during processes such as dissolution. In this work, the dissolution process of NAPL during two-phase flow in heterogeneous porous media is studied using pore-network modeling and micromodel experiments. A new physical-experimental approach is proposed to enhance the prediction of the dissolution process during modeling of interphase mass transfer. In this regard, the normalized average resident solute concentration is evaluated for describing the dissolution process at pore-level. To incorporate the effect of medium... 

The spatiotemporal dynamic of salinity concentration (SC) in saline lakes is strongly dependent on the rate of water flow into the lake, water circulation, wind speed, evaporation rate, and the phenomenon of salt precipitation and dissolution. Although in-situ observations most reliably quantify water quality metrics, the spatiotemporal distribution of such data are typically limited and cannot be readily extrapolated for either long-term projections or extensive areas. Alternatively, remotely sensed imagery has facilitated less expensive and a stronger ability to estimate water quality over a wide range of spatiotemporal resolutions. This study introduces an adaptive learning model that... 

Objective(s): Bioresorbable scaffolds have been advocated as the new generation in interventional cardiology because they could provide temporary scaffolds and then disappear with resorption. Although, the available stents in clinical trials exhibited biosafety, efficacy, no death, and no apparent thrombosis, Mg-substrate degradation on drug release has not been investigated. Materials and Methods: Therefore, more research has been needed to legitimize the replacement of current stents with Mg-based stents. UV-Vis spectrophotometer, scanning electron microscope (SEM), X-ray diffraction (XRD), pH measurement, H2 evolution, and corrosion tests determined the change in hybrid properties and... 

Over 60% of the world's discovered oil reserves are held in carbonate reservoirs, which are mostly naturally fractured. Conventional water flooding results in low oil recovery efficiency in these reservoirs as most of them are oil-wet. On account of negative capillary forces, injected brine cannot penetrate simply into an oil-wet matrix of fractured formations to force the oil out. Wettability alteration of the rock surface to preferentially more water-wet state has been extensively studied using both smart water and surfactants separately. This study aims to study the effects of Mg2+ as one of the most important wettability influencing ions on the wetting properties of oil-wet carbonate... 

Linear-dendritic ABA triblock copolymers containing poly(ethylene glycol) (PEG) as B block and hyperbranched poly(citric acid) (PCA) as A blocks were synthesized through polycondensation. The molecular self-assembly of synthesized PCA-PEG-PCA copolymers in water led to formation of nanoparticles and fibers in different sizes and shapes depending on the time and size of PCA blocks. Ten days after dissolving PCA-PEG-PCA copolymers in water, the size of fibers had reached several millimeters. Mixing a water solution of fluorescein as a small guest molecule and PCA-PEG-PCA copolymers led to the encapsulation of fluorescein by products of molecular self-assembly. To investigate their potential... 

In this study, cellulose acetate (CA) fibers were prepared using different solvent systems in electrospinning. The recorded scanning electron microscopy micrographs indicated that the morphology of the prepared fibers is closely associated with the type of electrospinning solvents. The prepared CA fibers were used as an extractive phase for on–line micro–solid phase extraction (μ-SPE) of nonsteroidal–inflammatory drugs (NSAIDs) in biological samples pursued by HPLC–UV determination. Work conducted on this research ascertained that the use of dichloromethane:acetone (3:1, v/v) solvent system in the CA dissolution for electrospinning, leads to the formation of porous ribbon–like fibers and... 

Calcite is among the most abundant minerals organizing the oil reservoir formation and therefore its surface properties play a central role in the increase of the oil recovery efficiency. The effect of low-salinity water in carbonate rocks reveals that brine composition and salinity can improve the oil recovery in carbonates through wettability alteration. However, the specific mechanism for wettability changes that leads to improved oil recovery in calcite is not well understood. To obtain deeper insights at atomic level into the understanding the characteristics of the calcite-water interface, we performed classical molecular dynamics simulations in the presence of different ions in brine...