Sharif Digital Repository

The leaching kinetics of stibnite in basic solution has been investigated. Spherical pellets of antimony sulphide were dissolved in 1 molar sodium hydroxide solutions at different temperatures. It was found that the shrinking core with ash layer model could satisfactorily explain the dissolution process. Using this model, it was found that initially the rate controlling step was a chemical reaction with activation energy of 10.2 kJ/mol. As the ash layer built up, diffusion through the ash layer became the rate controlling step. The activation energy for this step was found to be 33.4 kJ/mol. It was also observed that smaller particle size, larger solid to liquid ratio, and higher NaOH... 

The effect of pulse reverse current (PRC) method on Ni-Mo coatings electroplated from chloride solution was investigated by various plating parameters such as plating duration, the anodic duty cycle, the anodic current density and the cathodic current density. By increasing the anodic duty cycle and anodic current density, the Mo content of coatings reached 68wt.% and 78wt.%, respectively at cathodic current densities of 500 and 300mAcm-2. The Mo content of coatings increases by the preferential dissolution of Ni on the anodic pulse and also by the replenishment of Mo complexes in the diffusion layer near the substrate surface during the anodic pulse. In comparison with the direct current... 

In this study the bioleaching of a low-grade uranium ore containing 480 ppm uranium has been reported. The studies involved extraction of uranium using Acidithiobacillus ferrooxidans derived from the uranium mine samples. The maximum specific growth rate (μ max) and doubling time (t d) were obtained 0.08 h-1 and 8.66 h, respectively. Parameters such as Fe2+ concentration, particle size, temperature and pH were optimized. The effect of pulp density (PD) was also studied. Maximum uranium bio-dissolution of 100 ± 5 % was achieved under the conditions of pH 2.0, 5 % PD and 35 °C in 48 h with the particles of d 80 = 100 μm. The optimum concentration of supplementary Fe2+ was dependent to the PD.... 

In this work, phase evolution, solid solution formation and diffusion behavior of three binary systems, including TaC-HfC, TaC-ZrC and HfC-ZrC, were investigated. In this regard, pure carbide powders of TaC, HfC, and ZrC were selected as starting raw materials. The prepared samples were heat treated at 2000 C for 1 hour in Ar atmosphere. For each system, three compositions were chosen for phase evolution investigation by X-ray diffractometer. Moreover, three couple samples were prepared for diffusion behavior survey through SEM/EDX analyses. It was found that ZrC diffuses faster in TaC structure rather than HfC and a single phase solid solution phase with hosting TaC is formed in TaC-HfC and... 

The pseudocapacitance and morphology of electrodeposited transition metal oxides depend significantly on the morphology of the substrate. The nanoporous nickel substrate, derived from selective electro-dissolution of antimony from an electro-deposited Ni-Sb alloy, effectively promotes the electrochemical utilization of manganese oxide deposited on this structure. The large electronic and ionic conduction within the nanostructured deposit improve the energy storage performance of Mn oxide as compared to that on flat Ni substrate. In this work, the MnO2 specific capacitances of around 612 F g-1 were obtained, which was five times higher than Mn oxide deposited on a flat Ni-ribbon. A highly... 

The current study proposes a simple constitutive model that integrates the kinetics of precipitation during static aging and the kinetics of precipitate dissolution during preheating to deformation temperature to predict the hot flow behavior of AA6063 alloy. The model relates the flow behavior of the age-hardenable alloy to the alloy chemistry, thermal history as well as deformation temperature, strain, and strain rate by means of a physically based model. Different aging conditions, including supersaturated solid solution and overaging conditions with different deformation parameters, were assessed. Each part of the model was in good agreement with those of experimental and other model... 

The main purpose of this paper is modeling and simulation of in-situ releasing of smart nano-sized core-shell particles at the water-oil interface during polymer flooding. During the polymer flooding process, when these nano-particles reach the water-oil interface, migrate to the oil phase and the hydrophobic layer of them dissolves in this phase. After dissolution of this protective nano-sized layer, the hydrophilic core containing a water-soluble ultra high molecular weight polymer diffuses back into the water phase and with dissolving in this phase, dramatically increases viscosity of flooding water in the neighborhood of the water-oil interface. In this study, two different... 

Platinum extraction from spent reforming catalysts in iodine solutions under atmospheric pressure and at temperatures up to 95°C was previously investigated in our group. In this system, platinum is oxidized from the spent catalyst with tri-iodide. In some of the experiments, it was observed that platinum extraction peaked and then decreased. This indicates that a precipitation reaction slowly occurs that removes the dissolved Pt ions from the solution. Power-law rate equation for the Pt extraction to PtI6 2- and the precipitation of the dissolved platinum to PtI 4(s) was implemented to model the experimental Pt extraction data. The activation energies for the platinum dissolution reaction... 

Purpose. Drug release from nanosystems at the sites of either absorption or effect biophase is a major determinant of its biological action. Thus, in vitro drug release is of paramount importance in gaining insight for the systems performance in vivo. Methods. A novel in vitro in vivo correlation, IVIVC, model denoted as double reciprocal area method was presented and applied to 19 drugs from 55 nano formulations with total 336 data, gathered from literature. Results. The proposed model correlated the in vitro with in vivo parameters with overall error of 12.4 ± 3.9%. Also the trained version of the model predicted the test formulations with overall error of 15.8 ± 3.7% indicating the... 

One of the key factors in drug's efficacy is the value of their bioavailability that increases by the reduction of particle size through improvement of dissolution rate. In this study, raloxifene particle size was reduced by Rapid Expansion of Supercritical Solution (RESS). The effect of extraction temperature (40-80 °C), extraction pressure (10-18 MPa) and spray distance (5-10 cm) were investigated on size and particle size distribution of the nanoparticles. Particles were characterized using X-ray diffraction (XRD), Fourier Transform Infrared Analysis (FTIR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM) and Dynamic Light Scattering (DLS). The average size of... 

IN738LC is one of the superior nickel base superalloys utilized at high temperatures in aggressive environments. However, experiencing high temperatures and stresses during service causes microstructure deterioration and degradation of mechanical properties in this alloy. To restore the microstructure and mechanical properties of the degraded alloy, rejuvenation heat treatments can be considered. In this study, the evolution of microstructural features in a creep damaged IN738LC superalloy during different stages of rejuvenation heat treatment cycles was investigated. During solution treatment stage, dissolution of coarsened γ′ precipitates, grain boundary films and transition zone around... 

Dissolved air precipitation/solvent sublation (DAP/SS) was used for treatment of simulated and real oilfield produced water to generate very fine bubbles which are necessary for effective separation. In this method micro bubbles produced by saturation of air in a pressurized packed column were released in an atmospheric column leading the bubbles to raise resulting trapped contaminants in the Gibbs layer around them to be removed by a layer of immiscible solvent at the top of column. The method was conducted to solutions including Benzene, Toluene and Chlorobenzene (ClB) as part of BTEX contaminants in produced water, mixture of them as simulated produced water and real oilfield produced... 

Dissolution pressure and nozzle temperature effects on particle size and distribution were investigated for RESS (Rapid Expansion of Supercritical Solution) process. Supercritical CO2 was used as solvent and Ibuprofen was applied as the model component in all runs. The resulting Ibuprofen nano-particles (about 50 nm in optimized runs) were analyzed by SEM and laser diffraction particle size analyzer systems. Results show that in low supercritical pressure ranges, depending on the solvent and solid component properties (Lower than 105 bar for Ibuprofen-CO2 system), nozzle temperature should be as low as possible (80-90 °C for Ibuprofen-CO2 system). In the other hand in high supercritical... 

Semiconducting lead sulfide film was deposited on Stainless Steel (SS) electrode by cyclic voltammetry (CV) at room temperature. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry were used to investigate the electrochemical properties of PbS film in Na2SO4 solution. The voltammetric results showed that oxidative dissolution of PbS film occurred at about 0.21 V vs. Ag/AgCl and total film detachment from the surface occurs with increasing potential. It is concluded that the electrode surface was not passivated by sulfur produced from oxidative dissolution of PbS film. Also, cathodic reduction of the film continued to beyond the hydrogen evolution at -1.35 V vs. Ag/AgCl.... 

There are increasing evidences that adjusting the chemistry of the injecting water improves the oil recovery efficiency. However, the underlying mechanisms for this technique which is referred to as "smart waterflood" have not yet been thoroughly understood. It is needed to explore the role of individual ions through set of different tests, to find the right mechanisms behind "smart waterflood". This study is focused on the fluid/solid (carbonate) interactions through systematic wettability measurement. Contact angle measurements accompanied by spontaneous imbibition tests were employed to determine the role of individual monovalent and divalent ions in wettability alteration process by... 

Over 60% of the world's discovered oil reserves are held in carbonate reservoirs, which are mostly naturally fractured. Conventional water flooding results in low oil recovery efficiency in these reservoirs as most of them are oil-wet. On account of negative capillary forces, injected brine cannot penetrate simply into an oil-wet matrix of fractured formations to force the oil out. Wettability alteration of the rock surface to preferentially more water-wet state has been extensively studied using both smart water and surfactants separately. This study aims to study the effects of Mg2+ as one of the most important wettability influencing ions on the wetting properties of oil-wet carbonate... 

The recrystallization behavior of a commercial nickel-cobalt base superalloy, AEREX 350, is investigated by means of hardness test, X-ray diffraction, and microscopy. It is found that the alloy resists recrystallization up to a high temperature of 1025 °C. Recrystallized grains are readily formed at grain boundaries below this temperature; however, the growth of these new grains is inhibited by Widmanstätten η particles having coherent facets with the nickel matrix (γ). The passage of the recrystallization front results in coherency loss and consequently dissolution of the η platelets. Recrystallization proceeds with a discontinuous precipitation of the η phase behind the moving boundary