Sharif Digital Repository

Plug-In hybrid electric vehicles could be connected to the electrical grid to be recharged. To ease the charging process, one solution could use an on-board charger to charge the electric vehicle battery. This charger should be able to be connected to a conventional outlet for convenience reasons and moreover, it should be a grid friendly charger in order not to pollute the electrical network. Since most of the electric vehicle related projects are at their initial phases, keeping up with the pace and developing new technologies and proposing innovations and concepts will help growing the industry. In this regard, a new integrated bidirectional isolated soft-switched plug-in hybrid electric... 

Novel Na3MnCO3PO4 (NMCP)/reduced graphene oxide (rGO) nanocomposite was successfully synthesized via one-step hydrothermal method. The produced materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetry (TG), galvanostatic charge/discharge test and inductively coupled plasma optical emission spectroscopy (ICP-OES). Obtained results indicate the formation of ∼25 nm NMCP nanoparticles randomly distributed on rGO sheets. As a promising cathode material for Na-ion batteries, the hybrids deliver gravimetric discharge capacities of... 

In this paper a novel droop approach for autonomous power management in low voltage dc microgrids based on a master-slave concept is presented. Conventional voltage-based droop approaches suffer from poor power sharing due to line resistance effects on a virtual resistance, which is solved a by introducing a communication system to increase the current sharing accuracy. In this paper, a virtual frequency is superimposed by the master units, and slave units determine their output power according to the corresponding frequency-based droop characteristics. Unlike the voltage-droop methods, the proposed virtual frequency-droop approach can be applied for proportional power management among the... 

In this paper, a new control strategy and power management for a stand-alone PV/battery hybrid power system has been suggested. The solar cell arrays provide energy in the steady-state and the battery provides energy in transient states. Here, a charge controller system based on the MPP tracking technology, suitable for using in the islanded micro grid that contains a solar panel and a battery is designed. The charge controller includes a unidirectional DC-DC converter as an interface circuit between the solar panel and the DC bus, a bidirectional DC-DC converter as an interface circuit between the battery and the DC bus with a control system and power management in different states of... 

To overcome the problem of magneto hydrodynamic instabilities at the aluminum-cryolite interface in aluminum reduction cells, the use of a simple and efficient model has been suggested. In this paper a new model for evaluation of magneto hydrodynamic instabilities in aluminum reduction cells is proposed. This model is in the form of a wave equation for interfacial oscillations and is constructed based on Shallow Water approximation and linear stability analysis. In this model two terms for linear friction in each molten layer of aluminum and cryolite has been considered and also Lorentz forces in cryolite layer have not been neglected. By accounting of these additional terms in our model,... 

The battery management system (BMS) in electric vehicles monitors the state of charge (SOC) and state of health (SOH) of lithium-ion battery by controlling transient parameters such as voltage, current, and temperature prevents the battery from operating outside the optimal operating range. The main feature of the battery management system is the correct estimation of the SOC in the broad range of vehicle navigation. In this paper, to estimate real-time of SOC in lithium-ion batteries and overcome faults of Extended Kalman Filter (EKF), the Square-Root Sigma Point Kalman Filter is applied on the basis of numerical approximations rather than analytical methods of EKF. For this purpose, the... 

Current energy systems face multiple problems related to inflation in energy prices, reduction of fossil fuels, and greenhouse gas emissions which are disturbing the comfort zone of energy consumers and the affordability of power for large commercial customers. These kinds of problems can be alleviated with the help of optimal planning of demand response policies and with distributed generators in the distribution system. The objective of this article is to give a strategic proposition of an energy management system for a campus microgrid (µG) to minimize the operating costs and to increase the self-consuming energy of the green distributed generators (DGs). To this end, a real-time based... 

We report improved performance of Li-ion polymer batteries through advanced gel polymer electrolytes (GPEs). Compared to solid and liquid electrolytes, GPEs are advantageous as they can be fabricated in different shapes and geometries; also ionic properties are significantly superior to that of solid and liquid electrolytes. We have synthetized GPE in form of membranes by trapping ethylene carbonate and propylene carbonate in a composite of polyvinylidene fluoride and N-methylpyrrolidinore. By applying phase-transfer method, we synthetized membranes with micro-pores, which led to higher ionic conductivity. The proposed membrane is to be modified further to have higher capacity, stronger... 

Discharge characteristics of nanorods (NRs), microsized and nanosized copper (II) oxide (CuO) particles prepared via thermal decomposition and thermal oxidation routes are examined as cathode materials of a Zn/CuO cell without membrane separators. The electrochemical discharge is examined galvanostatically at a current density of 500 mAg−1 and reveals that the first discharge cycles of all the CuO materials contain one potential plateau; subsequent discharge cycles involve three potential plateaus. Each potential plateau is due to an electrochemical reaction. The first, second, and third potential plateaus are attributed to Cu2O3, CuO, and Cu2O discharges,... 

Na3MnCO3PO4 (NMCP) particles were synthesized via ball milling of Mn(NO3)2.4H2O, Na2HPO4.2H2O and Na2CO3.H2O powders. The particles were anchored onto reduced graphene oxide (rGO) sheets during hydrothermal reduction process under stirring. Materials produced were characterized by x-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric (TG) measurement and galvanostatic charge/discharge tests. Results showed that dissolution of ball milling products in DI water is an effective method for separation of NMCP from byproducts. Best milling time for production of pure NMCP of minimum particle... 

Plug-in hybrid electric vehicles draw electricity from the electrical grid and store energy in their batteries. To increase charge availability for plug-in hybrid electric vehicles, on-board chargers can be used, which should be small in size and lightweight. In this article, an on-board bidirectional soft-switched battery charger is proposed that utilizes a phase-shift-controlled dual-bridge series resonant converter with isolation. The bidirectional characteristic of proposed charger makes it suitable for vehicle-to-grid operation (i.e., injecting power from the vehicle to the grid) in smart grids. A switching control scheme is also proposed to provide soft-switching operation for all...