Sharif Digital Repository

This research study presents an experimental investigation on forced convection heat transfer of an aqueous ferrofluid flow passing through a circular copper tube in the presence of a magnetic field. Both constant magnetic field and alternating magnetic field was examined. Moreover magnetic field layout and strength and modes of alternating magnetic field was investigated. The flow passes through the tube under a uniform heat flux and laminar flow conditions. The primary objective was to intensify the particle migration and disturbance of the boundary layer by utilizing the magnetic field effect on the nanoparticles for more heat transfer enhancement. Complicated convection regimes caused by... 

Pulsating heat pipe (PHP) is a two-phase device for the means of transferring high heat fluxes and is used extensively for the electronic cooling. In this study the different flow regimes in PHP with different fluids have been investigated. In this research, 3 different fluids including: Pure fluids, Ferro-fluid and surfactant solution with %50 filling ratio have been used. For ferro-fluid, 5 different concentrations and 3 type of magnetic fields have been operated in 2 different heat pipes. Results show that ferrofluid is more stable in Pyrex made-heat pipe for long period of time and no magnet mode has the best thermal performance due to high conductivity of fluid. In copper made-heat pipe... 

The use of nanofluids to improve the heat transfer has a special attention in the industry. researches focus on the efficiency of heat transfer nanofluids dates back to 1998. Ferrofluids are a particular type of nanofluids which their nanoparticles have magnetic effect and heat transfer can be increased by applying magnetic field to them. In this work, thermal and hydrodynamic performance of ferromagnetic fluid which flows through a copper tube in thermal entrance region has been studied. The flow in the tube is laminar and is affected by constant heat flux. Part of the tube contains a porous medium with paramagnetic properties and porosity of 0.46. Ferrofluid is composed of F e3O4 and water... 

Considering the advantages and disadvantages of reported micropumps, we aimed to introduce a novel idea to diminish the disadvantages and promote the advantages of PiezoElectric micropumps. This novel idea operates based on a mercury slug actuation in a microchannel. This cyclic motion of the mercury slug which is similar to a piston, push the fluid in the microchannel and pump the flow. However, to bring this idea into the practice, a control system must be designed. This system contains: LABVIEW code, DAQ board & a switching Board. The pattern of actuating mercury is drawn in LABVIEW. DAQ Board produces electrical signals according to LABVIEW code. Switching board will transform the... 

Encompassing an interaction between the phase change material (PCM) and the droplets of a heat transfer fluid, the direct contact (DC) method provides a state-of-the-art solution for the meager melting and solidification rates of PCMs. In the DC procedure, when impinging on the molten PCM pool, droplets evaporate, solidifying the portion of the PCM. For the first time, the impact of single and simultaneous double ethanol droplets, having an average diameter of 2.68 mm, on the molten paraffin wax has been scrutinized exhaustively. Experiments have been carried out through high-speed imaging for various Weber numbers ranging from 179 to 464, pool temperatures from 70 to 95°C, and horizontal... 

Heat pipe is a heat transfer device that may have a thermal conductance hundreds of times higher than that of copper. Currently, heat pipes have been used in numerous applications including satellite thermal management, energy systems for energy recovery and energy conversion, and electronics cooling, particularly in laptop and desktop computers. In this thesis, a new application of the heat pipe in an automotive engine is introduced. In this application, heat pipes are incorporated into the radiator of the automotive engine for more efficient heat transfer. In particular, the employment of the heat pipes would allow the gravity to be used as the driving force for the liquid... 

Increasing fossil fuel consumption has led to serious problems in energy supply and environmental issues such as global warming, air pollution, ozone depletion, and security issues. A strategy to improve energy consumption requires recycling wasted energy and preventing it from being released into the environment. A wide range of available heat sources such as heat dissipation in the transportation industry, solar heat, biomass and geothermal have low-temperature, which contain large amounts of energy but they do not have enough temperature to make them economically viable and cost-effective. Several applied technologies have been proposed to utilize these resources, among which the organic... 

Loop heat pipe (LHP) is a two phase heat transfer device that is mostly used in cooling spacecrafts facilities. In this research a novel LHP is studied analytically and its steady state operating characteristics is analyzed in a one dimensional approach with heat transfer and pressure drop correlations. The novel LHP has a new arrangement in evaporator and reservoir configuration in comparison with conventional LHPs, which results in a different energy and fluid flow. In addition, the novel LHP has a new mechanism for acive control of working temperature. In modeling the proposed LHP the fluid and energy flows are first determined, then proper correltaions for calculationg each energy flow... 

In this research, two important mechanisms were discussed including droplet generation and jumping mechanisms using electro wetting-on-dielectric. For these purposes, the finite element method (FEM) was used to solve the unsteady Naiver-Stokes equation. In addition, the level set method was applied to capture the interface between two phases. In the current study, first, droplet generation in a T-junction fluidic channel device was studied through using electro wetting actuation. The efficacy of electro wetting on the droplet generation frequency as well as droplet diameter is visible in a T-junction fluidic channel since after applying voltages, specified with non-dimensional electro... 

Heat sources with temperatures less than 100 °C are available in various processes in the form of waste heat and from renewable sources such as solar energy. One of the methods of gaining benefit from these ubiquitous and abundant heat sources is using thermal harvesters that convert low-temperature heat into electrical energy without the need for the power grid. Portable harvesters can be a reliable and low-cost option for providing stable energy for low-power electronic devices such as wireless sensors. Many studies have been conducted at the global level to design and develop efficient low-temperature heat harvesting mechanisms. However, each of them is associated with fundamental... 

Heat pipes are useful devices in heat transfer, renewable energies and cooling systems in particular. According to various application of this systems in different industries, performance improvement of this devices has gained much importance. Working fluid is one of the effective factors on pulsating heat pipes. Since heat transfer in PHPs is natural convection and two-phase, specific heat and thermal conductivity of working fluid have an important role in the performance of pulsating heat pipes. In the present study, the effect of using nano-encapsulated PCM along with reduced graphene oxid (RGO) dispersed in water and their mixture as working fluid has on the performance of PHPs has been... 

Liquid marbles are droplets enwrapped by a layer of micro/nanoparticles. Due to the insulation of inner fluid from the environment, the lower evaporation rate of the fluid, and the capability of motion even on hydrophilic surfaces, these liquid marbles, as an alternative to conventional droplets, have attracted the attention of researchers in digital microfluidics. Utilizing ferrofluid as the liquid core of the liquid marbles enables remote control over the liquid marbles by an external magnetic field. In this research, the dynamic behavior of ferrofluid liquid marbles under the magnetic field generated by an electromagnet is investigated. In this research, governing physics on the motion of... 

In this investigation Magneto Mercury Reciprocating Micrpump (MMRM) the combination of Magneto-Hydrodynamic and Reciprocating micropumps has been analyzed. To achieve the analytical and numerical solution of one-tank and three-tank MMRM, the momentum, continuity, volume fraction and magnetohydrodynamic equations have been presented. The dimensionless analytical solution of one-phase and two-phase three dimensional MHD flow in the condition of using constant current and potential electrical source, has been offered.
The boundary between mercury and air has been tracked via VOF method in OpenFOAM software. VOF equation has been solved by explicit method with variable time step and maximum... 

Micro combined heat and power (MCHP) system is one of the most worldwide considered energy saving with high total efficiency systems. This research presents the application of MCHP to small scale users such as residential or light commercial buildings. Initially, the available technology in micro scale that can be used as an energy generator has been specified and categorized. Since then, by using the overall energy purchased cost by households assuming the energy carriers are kerosene, gas and electricity, total demand has been determined considering that the electricity expenses showing the use of electric appliances and the gas expenses expressing the cost of domestic hot water and... 

This research study presents an experimental investigation on forced convection heat transfer of an aqueous ferrofluid flow passing through a circular copper tube in the presence of an alternating magnetic field. The flow passes through the tube under a uniform heat flux and laminar flow conditions. The primary objective was to intensify the particle migration and disturbance of the boundary layer by utilizing the magnetic field effect on the nanoparticles for more heat transfer enhancement. Complicated convection regimes caused by interactions between magnetic nanoparticles under various conditions were studied. The process of heat transfer was examined with different volume concentrations... 

Salt water is desalinated to produce fresh water suitable for human consumption or irrigation. Most of desalination methods require consuming large amounts of fossil fuels. Solar distillation is one of the best techniques from another available techniques for desalinating in small-scale brackish water. The main problem of these systems is the low rate of water production.Single basin solar still is a very simple solar device used for converting available brackish or waste water into potable water. This device can be fabricated easily with locally available materials. The maintenance is also cheap and no skilled labor is required. It can be a suitable solution to solve drinking water problem.... 

Improving the discharge process of phase-change materials (PCMs) is of great importance. In this study, the process of acetone drop impact on molten paraffin, as a direct-contact solidification method, is experimentally investigated. Four Weber numbers (corresponding to heights of 10, 20, 30, and 40 cm) for the acetone drop and six surface temperatures (66, 68, 70, 75, 80, and 90 °C) for the molten paraffin are considered. As the acetone drop impacts the molten paraffin, the drop absorbs heat from the melting paraffin and boils, solidifying a portion of the molten paraffin. Two important parameters that govern the acetone drop dynamics and the solidification of the molten paraffin are the... 

EOR (oil enhanced recovery) is very important as oil is a nonrenewable resource. Depending on the characteristics of the rock formation, primary production can result in the recovery of up to 20% of the oil originally in the rock. This means that at least 80% of the oil may remain in the rock unless additional technology is used to increase the recovery. Before finding best way to do for EOR, scientists must study properties of different porous media that oil is trapped between its grains. Most of research and studies investigate networks of porous media but this work focused on oil movement through a pore space in porous media lonely not in network by waterflooding. Studying a pore space is... 

In petrochemical, Process condensate is mixtures of dissolved gasses and water. Process condensate striper tower is a physical separation equipment where dissolved gasses remove from water by saturated steam. The Process condensate feed is introduced at the top of the column and the steam input is located at the bottom. When the process condensate enters the stripper tower, it comes down the tower also when the steam enters the tower, it goes up, because there is packing portion in the stripper tower and two streams are countercurrent, as result contact between steam and process condensate, a lot of dissolved gases vapors and exits with steam from top of tower. After leaving the tower, the...