Sharif Digital Repository

The hydrogenation of carbon dioxide to methanol represents a promising route for the efficient use of an anthropogenic greenhouse gas, in which catalysts play a key role in carbon dioxide conversion and methanol selectivity. In this study, firstly, CuO-ZnO-Al2O3, CuO-ZnO-ZrO2, CuO-ZnO-ZrO2-Al2O3, CuO-ZnO-Al2O3-CeO2 and CuO-ZnO-ZrO2-CeO2 catalysts were made using co-precipitation method, then these catalysts were characterized by inductively coupled plasma optical emission spectrometry, specific surface area and pore size distribution, X-ray diffraction, Field Emission Scanning Electron Microscopy, temperature programmed reduction. Finally, in order to compare the performance of the catalysts... 

Nano and microsize H-ZSM-5 were synthesized by hydrothermal crystallization method with same batch composition to investigate the effect of crystallite size of H-ZSM-5 in the methanol conversion to propylene (MTP) process. The average particle size of nano and microsize H-ZSM-5 were obtained in the range of 0.15- 0.2 and 1- 2 µm, respectively. Also, optimized catalyst of Petrochemical Research and Technology Company was synthesized using terapropylammonium bromide as template. Nowadays, terapropylammonium bromide (TPABr) is cheeper than terapropylammonium hydroxide (TPAOH); therefore we used it as tamplate. Activity tests were conducted at operating conditions of T= 460˚C, P=1 atm and WHSV... 

By combustion, waste toxic, flammable and corrosive materials are changed to less inviromental problems by combustion. It also creats environmental problems (the most serios problem is caused by burning gases), as well as economic resources are wasted. So several ways was investigated to reduce combustion gases. Mini-methanol plant is one of varios possible ways that can convert these gases in to methanol. So methanol plant was simulated and then pinch analysis was performed on the simulated plant. Performing of pinch analysis caused 94.5 percent and 25 percent reduction in amaunt of hot and cold utility respectively. Before and after pinch analysis, the exergy analysis was performed on... 

The Increasing trend of gas flaring over oil fields and gas process systems in Iran not only causes several environmental problems, but makes the economical resources useless as well. Considering the high amount of flaring and old facilities, one of the best solutions is the recovery of the flare gas in Iran. It seems that collecting the flare gas is not possible in different sectors. Therefore, using a plant for converting flare gas to other products must be logical. In this project, the feasibility study of converting flare gas to other products is studied. For this reason, a methanol plant is simulated; whose input feed is the content of flare gas of the South of Iran (Marun and Siri).... 

This thesis encompasses two parallel, but independent subjects as follow: The first part of the thesis deals with synthesis of bimetallic Ni-Au nanoparticles (Bi Ni-Au), and application of them as electrodes in the methanol fuel cells. The Bi Ni-Au nanoparticles for this purpose were synthesized by controlled reduction of HAuCl3 and NiCl3 in the aqueous medium using NaBH4 as reductant and PVP as stabilizer, and immobilized on the surface of a glassy carbon (GC) electrode by means of Nafion polymer. The obtained electrode then was conditioned in an alkaline solution by cyclic voltammetric method in potential range 100 -700 mV (vs. Ag/AgCl). Physicochemical characterizations of the... 

In this study, different metal oxides were impregnated on the surface of ZSM-5 employed as photocatalysis for degradation of methylene blue dye used in the presence of ultraviolet light. The final products were characterized by powder X-ray diffraction (XRD) and fourier transform infrared (FT-IR) method. According to the proposed mechanism for the photocatalytic degradation of methylene blue based on these results, it was found that the reaction followed from the first-order mechanism. The results indicated that rate constant for pure ZSM-5 was 9.3〖 ₓ10〗^(-3) (min-1). Furthermore the impregnated ZSM-5 having 12% zinc oxide demonstrated the highest photocatalytic activity with rate constant... 

Propylene is one of the key material in petrochemical industries. In recent years, as propylene demand increases, development of new methods alongside traditional ways in production of propylene seems essential. The production of propylene from methanol using zeolitic catalysts is as one of this new methods. This method in recent years has got attention. H-ZSM-5 zeolite is one of the best catalysts appropriate for this process. However, rapid deactivation is the main problem this catalyst at the present time. Therefore, more research in order to increase stability and lifetime has been performed. The uses of promoters are as one of the simplest improvement methods of H-ZSM-5 zeolite.... 

The enzymatic transesterification of castor oil with methanol in a solvent free media is carried out using lipase catalyst. The influence of several operation conditions on the production of biodiesel was analyzed i.e. the amount of enzyme, molar ratio of methanol to castor oil, reaction temperature and reaction time. It is observed that with increase in molar ratio, reaction time and enzyme amount, the amount of product (biodiesel) increased. When reaction temperature increased, the amount of biodiesel increased firstly and then decreased. The optimum conditions for the reaction were as follows: enzyme amount 300 mg, molar ratio of methanol to oil 9:1 and temperature 55°C. The maximum... 

Titania is semiconductor material and have many applications including photocatalysis, photochromic, air and water purification, sensors, and solar cell. In electrophoretic deposition, charged particles dispersed in a stable suspension move towards an oppositely charged electrode, and form dense layer of deposit on it. In this investigation electrophoretic deposition of titania nano-particles in suspensions prepared by different solvents (methanol, ethanol and butanol) with and without dispersant (triethanolamine and polyethylenimine), was studied. Well stabilized suspensions, prepared for electrophoretic deposition. The effects of solvent type, additive concentration, mechanism of particles... 

The main objective of the present work is to achieve green design of a methanol plant by using life cycle process design (LCPD) and multi-objective optimization. As a starting point, simulation of Lurgi’s combined reforming process as a conventional reference methanol case (RMC) was performed in order to obtain its operational and kinetic parameters as well as its environmental impacts. The environmental concerns were calculated using one of the modern environmental impact assessment methods, i.e. life cycle assessment (LCA). To perform life cycle assessment of RMC, methanol production plant as well as its auxiliary units should be considered. The auxiliary units in the RMC include cryogenic... 

Iran with the second largest gas reserves in the world makes the importance of Kish Island more vital. Kish gas field, with a capacity of 67 trillion cubic meters gas, is one of the main hubs of Iran gas production. One of the uses of natural gas is to produce petrochemical goods such as Methanol. In this thesis the focus is on economical evaluation of producing Methanol for amount of 5,000 tons per day from Kish gas field. As a result, the required feed has been estimated about 150 million cubic feet per day and the net capital investment calculated to be 941 million US dollars. The initial estimate of Direct Permanent Investment (DPI) was calculated to be $590.8 million. Having considered... 

A two-dimensional, two-phase, nonisothermal model was developed in this work to investigate the water transport characteristic and water distribution in a direct methanol fuel cell (DMFC). Emphasis is placed on exploring the water distribution in different layers of DMF. The water and methanol crossover through the membrane were considered with the effect of diffusion, electro-osmotic drag, and convection. Governing equations including the prton and electron transport, continuity, momentum, species transport for methanol, water, and gases species, and the auxiliary equations are coupled to determine the output parameters. These parameters are the concentration distribution of the species,... 

Cell of fuel methanol can store fuel easily, because they can suitable for resources of energy with ambulant applications. As for with the extensive of electrical haul instruments, they attention to the use of fuel cell methanol. In this project a fuel cell methanol consist of different branches such as cathode, Anode, substrates of membrane and influx, has modeled with the form of flat three dimensional. This model consist of ambulant theorems, transfer of mass, chemistry theorems and reflexes of electro chemistry in spongy environment. As for with a little knowledge that is related to the oxidation of methanol, the first research is related to this reflex and the knowledge of mathematic... 

One of the different methods of heat transfer, is pool boiling process. In this method, the operating fluid starts to boil on a hot surface whose temperature is more than boiling point of the fluid. Based on difference between between surface temperature and fluid boiling point, amount of heat flux from hot surface to fluid and fluid behavior will be different. In recent years, many researchers have tried to improve the amount of heat transfer in the boiling process by using various methods such as nanoparticle addition or using magnetic field.Latent heat is thermal energy released or absorbed, by a body or a thermodynamic system, during a constant-temperature process, usually a first-order... 

In this research, self-optimizing method has been used to design a plant-wide control structure for processes containing purge and recycle streams. The method is based on the concept of self-optimizing variables to maximize the process profitability in the presence of possible disturbances. The purpose of this thesis is to perform this procedure on ammonia and methanol processes containing purge and recycle streams.Using the results obtained for the ammonia process and considering the constraints and operating conditions of the problem, the active constraints of this process were detected which were cooling water flow rates to exchangers. According to local analysis method, self-optimizing... 

In this study, we synthesized ZSM-5 and doped ZSM-5 applying cations such as Zn(II) and Fe(II). Furthermore, we synthesized [Zn,Fe]-ZSM-5 using similar method for the first time. The final products were characterised by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy. On the other hand, the hierarchical mesoporous Zn-ZSM-5 zeolite catalyst was prepared by alkali treatment by NaOH and Zn impregnation, and its application in the conversion of methanol to gasoline (MTG) process was studied. The modified zeolite samples after modification were also characterized by FT-IR and XRD methods. Zn impregnated mesoporous catalyst Zn-Alk-Z5 exhibited dramatic improvements in... 

Emission of CO2 and its diffusion into atmosphere is associated with negative effects on the environmental such as Green House Gases effect. Various techniques of CO2 Capture in energy conversion and processing plant are investigated. A method of CO2 Capture could be based on utilization of solar energy for producing methanol. Basic design of such a system and feasibility analysis of developing that system has been considered on the subject of the present research work. Basic design and commercial feasibility of the system producing methanol through capturing CO2 from exhaust gases of a power plant and hydrogen produced by using solar energy have done such an integrated system. The main... 

In this study a systematic effort was made to investigate the poisoning effect of sulfur-containing materials on the electro- oxidation of methanol and ethanol on Ni and Cu electrodes in alkaline solutions by the methods of cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Activation energy of methanol electro-oxidation in the absence of Na2S was obtained 30.7 kJ/mol by cyclic voltammetric at different temperatures, and its values increased by increase in Na2S concentrations to 97kJ/mol. Na2S adsorption isotherms corresponded with Langmuire isotherm, equilibrium constants of adsorption – desorption and adsorption enthalpy (ΔHads= -62kJ/mol) were calculated for... 

We have studied binary structures contain; as grown thin film of carbon nanotubes (CNTs) , CNT rich polymeric composite, Pd doped WO3 thin film, and also hybrid thin film which was mixed CNTs and WO3 nanoparticles and ternary structure which was obtained by adding Pd to hybrid structure as a hydrogen gas sensor. The structure, morphology, chemical composition and quality of as–grown and functionalized CNTs and sensitive films were studied by SEM, TEM, XRD, XPS, DLS, FTIR and Raman spectroscopy methods. Variation of film’s electrical resistance after exposure gases is utilized as the principle of gas sensing. Multi-Walled Carbon Nanotube (MWCNTs) films were obtained by Thermal Chemical Vapor... 

Catalytic cracking of iso and normal butane over HZSM-5 at several temperatures and a variety of contact time and different partial pressures of hydrocarbon feed was conducted. Experiments indicate that the operating conditions have considerable effects on final product distribution and feed conversion. Results show that high temperatures, low contact time and partial pressure of paraffin feed favor the light olefin production, particularly propylene production. Results obtained for iso-butane show a similar conversion values in comparison to n-butane but a higher olefin and propylene selectivity. Finally kinetic modeling of both iso and normal butane cracking was performed based on a lump...