Sharif Digital Repository

The present work deals with a novel approach for grafting a sol-gel based sorbent, using diazonium salts for preparation of an unbreakable capillary microextraction (CME) device in on-line combination with high performance liquid chromatography (HPLC). The use of diazonium salts modifier allowed all types of metallic and non-metallic substrates to be used without any limitation. Substrates including copper, brass, stainless steel and polytetrafluoroethylene (PTFE) were chosen to be functionalized by chemical or electrochemical reduction of 4-amino phenyl acetic acid. Then, 3-(trimethoxysilyl)propylamine (3TMSPA) was selected as the precursor and the only reagent for preparation of the... 

Magnetic Fe3O4@SiO2 starch-graft-poly(acrylic acid) (SPAA) nanocomposite hydrogels were prepared and used as absorbents for removal of crystal violet from aqueous solutions. Dynamic swelling, effect of contact time, absorption kinetics and nanocomposite hydrogel mass for removal of crystal violet dyes from aqueous solutions were studied. Fourier transform infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometer measurements were used for the characterization of the nanocomposite hydrogels. The nanocomposite hydrogels had high magnetic sensitivity under an external magnetic field, which allowed their magnetic separation from water, thus avoiding secondary... 

A new cationic flocculant was synthesized by graft copolymerization of acrylamide (AM) and 3-(methacryloylamino)propyl]trimethylammonium chloride (MAPTAC) onto salep using free radical polymerization initiated by ammonium persulfate (APS) to produce cationic salep [S-g-P(AM-co-MAPTAC)]. Reaction parameters (monomers/salep ratio, concentration of reactants, MAPTAC/AM ratio, and APS) were optimized using a full factorial experimental design to obtain the highest settling rate for cement suspensions. The best performing product was characterized by gel permeation chromatography (GPC), FTIR, 1H NMR spectroscopy, and thermogravimetric analysis (TGA). The resulted cationic flocculant may be... 

Nanofiber membranes were fabricated by electrospinning poly(vinylidene fluoride). The electrospun nanofiber membranes were further modified by grafting of acrylic acid (AA) and methacrylic acid (MAA) over the surfaces of the membranes. Plasma AA graft was attempted only, and the results indicated the partial membrane pore filling with grafted AA. For MAA grafting, chemically induced polymerization using benzoyl peroxide and hydrogen peroxide was attempted. The combination of plasma and chemically induced MAA graft polymerization was also attempted. The membranes were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and static contact angle (SCA)... 

Synthesis of dextran-graft-poly(hydroxyethyl methacrylate) gels as a new fluoride biosorbent was considered in this work. For this propose, the Taguchi experimental design method was used for optimizing the synthetic conditions of the gels to reach high level of fluoride absorbency. The effects of three main parameters including concentrations of monomer (hydroxyethyl methacrylate), crosslinking agent (ethylene glycol dimethacrylate), and initiator (ammonium persulfate) on the final properties of the prepared gels were investigated. The proposed mechanism for grafting and chemically crosslinking reactions was proved with equilibrium water absorption, Fourier-transformed infrared, scanning... 

This work focused on the design of new pH-responsive nanoparticles for controlled delivery of anticancer drug doxorubicin (Dox). Nanoparticles of poly(methacrylic acid)-polysorbate 80-grafted starch (PMAA-PS 80-g-St) were synthesized by using a one-pot method that enabled simultaneous grafting of PMAA and PS 80 onto starch and nanoparticle formation in an aqueous medium. The particles were characterized by FTIR, 1H NMR, TEM, DLS, and potentiometric titration. Dox loading and in vitro release from the nanoparticles were investigated. The FTIR and 1H NMR confirmed the chemical composition of the graft terpolymer. The nanoparticles were relatively spherical with narrow size distribution and... 

Salep phosphate modified biopolymers with different phosphate contents were prepared via reacting salep (a multi-component polysaccharide obtained from dried tubers of certain natural terrestrial orchids) with a solution of primary and secondary sodium phosphates under basic conditions in a semidry process. Structural characterization of salep phosphates were carried out by 31P NMR, FT-IR spectra and TGA curves. Determination of the phosphate content in samples was done by a standard spectrophotometric method. Then, novel (salep phosphate)-based hydrogels were synthesized by graft copolymerization of acrylic acid (AA) monomer onto salep phosphate backbones. Effect of the phosphate contents... 

A novel nano-porous hydrogel (NPH) was synthesized via graft copolymerization of sodium acrylate (Na-AA) and acrylamide (AAm) onto salep backbones and its application as a carrier matrix for oral delivery of tetracycline hydrochloride (TH) was investigated. The Taguchi method as a strong experimental design tool was used for synthesis optimization. The swelling behavior of optimum hydrogel was measured in various media. The hydrogel formation was confirmed by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetrical analysis (TGA). The study of the surface morphology of the hydrogels using SEM and AFM showed a nanoporous (average pore size: 180. nm) structure for the sample... 

Novel high capacity swelling nanoporous hydrogel (NPH) was synthesized via graft copolymerization of acrylamide (AAm) onto kappa-carrageenan (kC, as a polysaccharide) and gelatin (as a protein) hybrid backbone, after hydrolysis of this system. The Taguchi method as a strong experimental design tool was used for its optimized synthesis. The Taguchi method was applied for the experimental and standard 9 orthogonal array (OA) with four factors and three levels for each factor. A series of NPHs were synthesized by proposed conditions of Qualitek-4 Software. Considering the results of 9 trials according to analysis of variance (ANOVA), optimum conditions were proposed. The swelling behavior of... 

Synthesis of novel natural-based superabsorbents with improved properties is of prime importance in many applications. In this article we report an efficient synthesis of new polysaccharide-based superabsorbent hybrid composing carrageenan, acrylic acid, sodium acrylate, and 2-hydroxyethyl acrylate through homogenous solution polymerization process. Infrared spectroscopy and thermogravimetric analysis (TGA) were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy (SEM). To deeper studies on the structure-property relation in SAP hydrogels, three hydrogels with different acrylic acid/2-hydroxyethyl... 

A series of superabsorbent composites were synthesized through graft copolymerization of acrylic acid (AA) onto carboxymethyl cellulose (CMC) in the presence of celite powder using N,N'-methylenebisacrylamide (MBA) as a cross-linking agent and ammonium persulphate (APS) as an initiator. The chemical structure and thermal properties of the composite hydrogels were characterized by FTIR spectroscopy and TGA methods, respectively. Morphology of the samples was examined by scanning electron microscopy (SEM). In free-state, the swelling conditions and hence the related data are not real, because in all their applications the swelling particles of superabsorbent must absorb aqueous solutions while... 

Citric acid was polymerized onto the surface of functionalized multiwall carbon nanotubes (MWCNTCOOH) and MWCNT-graft-poly(citric acid) (MWCNTg-PCA) hybrid materials were obtained. Due to the grafted poly(citric acid) branches, MWCNT-g-PCA hybrid materials not only were soluble in water but also were able to trap water soluble metal ions. Reduction of trapped metal ions in the polymeric shell of MWCNT-g-PCA hybrid materials by reducing agents such as sodium borohydride led to encapsulated metal nanoparticles on the surface of MWCNT. Herein palladium nanoparticles were encapsulated and transported by MWCNT-g-PCA hybrid materials (MWCNT-g-PCA-EPN) and their application as nanocatalyst toward... 

A thermosensitive copolymer was synthesized by graft copolymerization of poly(lactide-co-glycolide) (PLGA) copolymers onto the surface of chitosan membranes. Acryloyl chloride was used as a coupling reagent for the covalent attachment of PLGA to the chitosan membranes. FTIR spectroscopy and DSC analysis were used to characterize the resulting graft copolymer. Thermosensitive swelling behaviors of the copolymer were investigated as well. The membranes exhibited reversible swelling-shrinking behavior; higher swelling ratios were obtained observed at higher temperatures. Drug permeation studies were carried out using vancomycin hydrochloride and betamethasone sodium phosphate as the model... 

This paper presents a dry mechanochemical process to produce hydroxyapatite (HAp) nanoparticles. Two distinct chemical reactions are introduced to prepare HAp powders using milling process. Structural and morphological properties of the obtained materials are studied by X-ray diffraction and transmission electron microscopy. The results reveal that the single crystal HAp nanoparticles have been successfully produced in metallic and polymeric vials through two different experimental procedures. Tempered chrome steel and polyamide-6 materials are adopted as the metallic and polymeric vials respectively. Nanoellipse, nanorod and nanosphere powders are obtained in these experimental procedures.... 

A manganese porphyrin, meso-tetrakis(pentafluorophenyl)porphyrinato manganese(iii) acetate, Mn(TPFPP)OAc, was immobilized on silica-coated magnetic Fe3O4 nanoparticles functionalized with 3-aminopropyltriethoxysilane (APTS) through the amino propyl linkage using a grafting process in toluene solvent. This enabled the covalent immobilization of Mn(iii) porphyrin via an aromatic nucleophilic substitution reaction, to afford the Fe3O4@SiO2-NH2@MnPor catalyst. The resulting nanoparticles were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), FT-IR spectroscopy, UV-Vis spectroscopy, elemental analysis (CHN), atomic absorption spectroscopy (AAS), and vibrating... 

A magnetic nanoparticle@starch-g-poly(vinyl sulfate) nanocomposite (MNP@St-g-PVS) as a new magnetic nano-adsorbent has been prepared based on graft copolymerization of vinyl acetate onto starch in the presence of magnetic nanoparticles, where the acetate groups were converted to hydroxyl groups followed by the sulfation of the hydroxyl groups using chlorosulfonic acid. Characterization of this magnetic nanocomposite was carried out by FTIR, TGA, XRD, VSM, SEM, TEM and elemental analysis. The resulting nanocomposite was used as an adsorbent for the removal of typical cationic dyes, methylene blue (MB) and malachite green (MG), from aqueous solutions. All experimental parameters that can... 

Poly(amidoamine)-graft-poly(methyl acrylate) magnetic nanocomposite was synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the functionalization of the methyl ester groups with poly(amidoamine) dendrimer. The resulting poly(amidoamine)-graft-poly(methyl acrylate) magnetic nanocomposite was then characterized by infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, scanning electron microscope and X-ray diffraction analysis. Its application as an adsorbent for the removal of Pb(II) ions was studied. The removal capability of the adsorbent was investigated in different pH values, contact time (kinetics) and... 

In this study, maleic anhydride grafted polypropylene microporous flat-sheet membranes were prepared via a thermally induced phase separation method with a mixture of dibutyl phthalate and dioctyl phthalate as a diluent. The effects of the polymer composition and coagulation bath temperature on the morphology and performance of the fabricated membranes were investigated. The hydrophilicity results of the membranes demonstrated that membrane modification reduced the water contact angle by about 45°, whereas the pure water flux was enhanced about four times. The antifouling behavior of the fabricated membranes was also investigated in a membrane bioreactor. The results show that the pure water... 

A novel optimized chelating hydrogel was synthesized via graft copolymerization of acrylamide and 2-hydroxyethyl methacrylate (as two-dentate chelating co-monomer) onto salep (a multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids) using N,N′-methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Reaction parameters (N,N′-methylenebisacrylamide and ammonium persulfate amounts as well as acrylamide/2-hydroxyethyl methacrylate weight ratio) affecting the water absorption of the chelating hydrogel were optimized using a systematic method to achieve a hydrogel with high swelling capacity as possible. Heavy metal ion adsorption... 

Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was...