Sharif Digital Repository

The pseudocapacitance and morphology of electrodeposited transition metal oxides depend significantly on the morphology of the substrate. The nanoporous nickel substrate, derived from selective electro-dissolution of antimony from an electro-deposited Ni-Sb alloy, effectively promotes the electrochemical utilization of manganese oxide deposited on this structure. The large electronic and ionic conduction within the nanostructured deposit improve the energy storage performance of Mn oxide as compared to that on flat Ni substrate. In this work, the MnO2 specific capacitances of around 612 F g-1 were obtained, which was five times higher than Mn oxide deposited on a flat Ni-ribbon. A highly... 

Dissolution pressure and nozzle temperature effects on particle size and distribution were investigated for RESS (Rapid Expansion of Supercritical Solution) process. Supercritical CO2 was used as solvent and Ibuprofen was applied as the model component in all runs. The resulting Ibuprofen nano-particles (about 50 nm in optimized runs) were analyzed by SEM and laser diffraction particle size analyzer systems. Results show that in low supercritical pressure ranges, depending on the solvent and solid component properties (Lower than 105 bar for Ibuprofen-CO2 system), nozzle temperature should be as low as possible (80-90 °C for Ibuprofen-CO2 system). In the other hand in high supercritical... 

The leaching kinetics of stibnite in basic solution has been investigated. Spherical pellets of antimony sulphide were dissolved in 1 molar sodium hydroxide solutions at different temperatures. It was found that the shrinking core with ash layer model could satisfactorily explain the dissolution process. Using this model, it was found that initially the rate controlling step was a chemical reaction with activation energy of 10.2 kJ/mol. As the ash layer built up, diffusion through the ash layer became the rate controlling step. The activation energy for this step was found to be 33.4 kJ/mol. It was also observed that smaller particle size, larger solid to liquid ratio, and higher NaOH... 

In this study the bioleaching of a low-grade uranium ore containing 480 ppm uranium has been reported. The studies involved extraction of uranium using Acidithiobacillus ferrooxidans derived from the uranium mine samples. The maximum specific growth rate (μ max) and doubling time (t d) were obtained 0.08 h-1 and 8.66 h, respectively. Parameters such as Fe2+ concentration, particle size, temperature and pH were optimized. The effect of pulp density (PD) was also studied. Maximum uranium bio-dissolution of 100 ± 5 % was achieved under the conditions of pH 2.0, 5 % PD and 35 °C in 48 h with the particles of d 80 = 100 μm. The optimum concentration of supplementary Fe2+ was dependent to the PD.... 

In this study, leaching of reverberatory furnace dust at Sarcheshmeh was investigated in H2SO4-O3 medium. Response surface methodology based on central composite face-centered design (RSM-CCF) was applied to optimize the operating parameters. The optimal conditions to achieve the principle objectives of maximizing copper dissolution and minimizing iron dissolution from dust were identified to be a temperature of 30 °C, a leaching time of 3 h, an initial pH of 0.5, a pulp density of 20%, and an ozone flow rate of 1 g/h. Under the optimum conditions, the copper and iron concentrations in the leaching solution were found to be 27.11 and 0.90 g/L, respectively. The results showed that selective... 

A facile hydrothermal method and subsequent electroactivation have been developed to fabricate three-dimensional (3D) CuO nanosheet arrays on the copper foil substrate, which can be used directly as a binder-free electrode for supercapacitor applications. Under optimum conditions, by using this facile method, a high capacitance of 125 mF/cm2 at a current density of 0.3 mA/cm2 is obtained. The prepared supercapacitor showed a good rate capability (46.4% capacitance retention, when the current density is increased to more than 30 times) and an excellent cyclability (more than 88% capacitance retention after 3000 cycles). © 2017 Elsevier B.V  

Enhanced Oil Recovery from carbonate reservoirs is a major challenge especially in naturally fractured formations where spontaneous imbibition is a main driving force. The Low Salinity Water Injection (LSWI) method has been suggested as one of the promising methods for enhanced oil recovery. However, the literature suggests that LSWI method, due to high dependence on rock mineralogy, injected and formation water salt concentration, and complexity of reactions is not a well-established technology in oil recovery from carbonate reservoirs. The underlying mechanism of LSWI is still not fully understood. Due to lack of LSWI study in free clay dolomite fractured reservoir, and to investigate of... 

In this work, phase evolution, solid solution formation and diffusion behavior of three binary systems, including TaC-HfC, TaC-ZrC and HfC-ZrC, were investigated. In this regard, pure carbide powders of TaC, HfC, and ZrC were selected as starting raw materials. The prepared samples were heat treated at 2000 C for 1 hour in Ar atmosphere. For each system, three compositions were chosen for phase evolution investigation by X-ray diffractometer. Moreover, three couple samples were prepared for diffusion behavior survey through SEM/EDX analyses. It was found that ZrC diffuses faster in TaC structure rather than HfC and a single phase solid solution phase with hosting TaC is formed in TaC-HfC and... 

Platinum extraction from the spent reforming catalysts in iodine-iodide solutions at temperatures from 25 to 95 °C was investigated. The reforming catalyst mostly consists of a porous gamma alumina support with metallic platinum finely dispersed on the walls of the nano-pores of the catalyst support. The effect of a variety of factors, including catalyst particle size, impeller agitation speed, reactant concentrations, liquid to solid mass ratio, temperature and the solution pH on the Pt extraction rate and recovery were investigated. It was found that the catalyst particle sizes less than 106 μm and impeller agitation speed higher than 700 rpm eliminated the effects of catalyst size and... 

Kinetics of dissolution of silver present in precious metal scraps in HNO3 was studied in temperature range of 26-85°C. Dissolution rate of silver was much faster than that of copper at all temperatures. Effects of particle size, stirring speed, acid concentration and temperature on the rate of dissolving of silver were evaluated. Dissolution rate decreases with particle size and increases with temperature. Dissolving was accelerated with acid concentrations less than 10 mol/L, Concentrations greater than 10 mol/L resulted in slowing down of the dissolution rate. Shrinking core model with internal diffusion equation t/τ = 1 - 3 (1-x)2/3 + 2 (1-x) could be used to explain the mechanism of the... 

A multiscale FD-KMC model has been developed to simulate the cyclic voltammetry test of a copper electrode in simple copper sulfate bath. In this coupled model, the FD code provides the cupric ion concentration on OHP for KMC code, while the KMC code provides the electrochemical properties of the copper electrode (surface activity and rate constants of redox reactions) as an input data for FD code. The changes in the electrode properties due to the atomistic phenomena (deposition dissolution and surface diffusion) have been studied for the present potentiodynamic system. The results showed that the CV process consists of some distinct stages, so that the electrode exhibits a specific... 

A continuum hydrodynamic model with immersed solid/fluid interface is developed for simulating calcite dissolution by hydrochloric acid (HCl) at the pore scale, and is most accurate for a mass-transfer-controlled dissolution regime under laminar flow conditions. The model uses averaged Navier-Stokes equations to model momentum transfer in porous media and adopts a theoretically developed mass-transfer formulation with assumptions. The model includes no fitting parameter and is validated using experimental results. The findings of previous research and existing models are briefly discussed and their shortcomings and advantages are elucidated. The present model is used in some pore-scale... 

Wettability alteration as the main mechanism of improved oil recovery in carbonates during low salinity/engineered water flooding (LS/EWF) is a complex phenomenon due to high heterogeneity of rock. During LS/EWF, wettability changes when electrochemical interactions at carbonate-brine interface happen. Anhydrite impurity in carbonates is one of the most important parameters affecting the electrochemical interactions at the rock-brine interface and the wettability alteration process. Therefore, the success of LS/EWF in carbonate reservoirs lies in perceiving the role of impurities such as anhydrite, from a geochemical and dissolution point of view. Modified flotation tests (MFT) were... 

Zinc exists as smithsonite and hemimorphite in the lead flotation tailings from the Dandi mineral processing plant in north western Iran. In this research, zinc-rich tailings produced in the Dandi plant were characterized mineralogically and a leaching study was carried out to assess the effect of several parameters on the kinetics of zinc dissolution. Parameters studied included: sulfuric acid concentration, reaction time, temperature and slurry density. It was found that leaching is controlled by a single rate-controlling step with an activation energy of 23.5 kJ/mol. To overcome some of the filtration problems associated with polymerization of silicic acid, lime was added as a coagulant....