Sharif Digital Repository

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors... 

Precipitation of asphaltene leads to rigorous problems in petroleum industry such as: wettability alterations, relative permeability reduction, blockage of the flow with additional pressure drop in wellbore tubing, upstream process facilities and surface pipelines. Experimentally determination of the asphaltene precipitation is costly and time consuming. Therefore, searching for some other quick and accurate methods for determination of the asphaltene precipitation is inevitable. The objective of this communication is to present a reliable and predictive model namely, the least - squares support vector machine (LSSVM) to predict the asphaltene precipitation. This model has been developed and... 

We use three-dimensional molecular dynamics simulation to investigate the driven flow between two parallel plates separated by argon atoms. Our simulations show that fluids in such channels can be continuously driven. Difference in surface wettability can cause a difference in fluid density along the nano channel. To control the nanochannel temperature walls, we use the thermal wall idea, which models the walls using atoms connected to their original positions by enforcing linear spring forces. In this study, we propose a nanochannel system in which, half of the channel has a low surface wettability, while the other half has a higher surface wettability and that the middle part of channel... 

In order to investigate the feasibility and effects of core permeability on capillary imbibition recoverable oil from carbonate cores, some laboratory tests were carried out at the EOR research laboratories of Sharif University, Iran. Outcrop rocks with different permeabilities were taken away from a recognized outcrop and used in these experiments. Special core analysis tests were run on two core samples to find out relative permeability and end point saturations. Wellhead separator oil and gas samples were collected and recombined to a reservoir gas - oil ratio. A core flooding system with a capability of free and forced imbibition testing was designed and installed. A number of free and... 

In order to relate the wetting properties at the pore scale to the macroscale prevailing forces, a series of experiments was performed in vertical porous media under forced gas invasion at various wettability conditions with partially spreading oil. To describe the dynamics of oil recovery in a three-phase flow condition, the downward gas flood experiments were continued by water injection from the bottom. Experimental results obtained in situations where the magnitudes of viscous, capillary, and gravity forces are comparable. We study the transition from flow configurations where the interface is stable with respect to viscous instability to flow configurations where viscous fingering... 

A literature review of laboratory and field scale studies on low salinity water (LSW) injection showed that the salinity and composition of injected water can have a significant impact on oil recovery. Historically, extensive research has been completed to understand the mechanisms and factors affecting LSW injection. However, although numerous mechanisms have been proposed to describe the interactions in the target process, none have been widely accepted. In this study, waterflooding tests were used to investigate the advantages, disadvantages, and effect of LSW injection. In laboratory tests, two different brines and crude oil of one of Iran's southern reservoirs were used to assess the... 

Nucleation and growth of condensing droplets on horizontal surfaces are investigated via a 2-D double distribution function thermal lattice Boltzmann method. First, condensation on completely uniform surface is investigated and different mechanisms which cause dropwise and filmwise condensation are studied. The results reveal the presence of cooled vapor layer instability in the condensation on completely smooth surfaces. In the second step, condensation on chemically heterogeneous surfaces is investigated. Moreover, the effect of non-uniformity in the surface temperature is also studied. The results indicate that the vapor layer instability and the nucleation start from the heterogeneities.... 

Wettability alteration in porous media is one of the mechanisms for enhancing oil recovery through injecting low-salinity water into carbonate reservoirs, in which active ions can remove the carboxylic oil component from the rock surface, altering the rock's wettability toward a water-wet condition. This study investigated the concomitant effects of low-salinity water and hydrophilic SiO2 nanoparticles on oil-wet dolomite rock. Results revealed that low-salinity water coupled with hydrophilic nano-SiO2 in oil-wet dolomite rock remarkably affected the wettability alteration of the rock, showing that the simultaneous presence of ions in water and hydrophilic nano-SiO2 led to considerable... 

The impacts of salinity adjustment of displacing fluid have recently gained special attention to enhanced oil recovery (EOR). Different mechanisms have been studied widely in the literature while some of them are still subjugated to more scrutiny. The effects of diluted sea water on the interfacial properties of brine and asphaltenic-acidic crude oil and the wettability alteration of carbonate reservoir rock are investigated in this experimental observational work. The measurements of interfacial tension (IFT) and contact angle (CA) as two main parameters are studied. Besides, the effects of asphaltene and resin in the crude oil on the IFT values between the crude oil and aqueous solution... 

Smart water injection is determined as an effective EOR process to change the wettability and interfacial tension for better micro/macro sweep efficiencies. This water contains reactive ions such as Mg ∧(2+), Ca ∧(2+) and SO-4 ∧(2-) which can act as potential determining ions and change the surface charge of calcite rocks. One of the major concerns in the execution of an effective waterflood, especially in tight carbonate reservoirs, is the incompatibility between the formation brine and the injecting water. This research work aims to investigate the most important challenge of waterflooding process related to the possible formation damage because of inorganic scale deposition during... 

In the current study, a novel approach which takes into account the effectiveness of both convectional surfactants and biosurfactants was investigated. The biosurfactant produced by Enterobacter cloacae strain was utilized concomitant with conventional surfactant (sodium dodecyl benzene sulfonate (SDBS)) to evaluate its capability to reduce the SDBS adsorption on rock surface (biosurfactant acts as sacrificial agent) or synergistically enhance the effectiveness of the SDBS. In this regard, the wettability alteration and interfacial tension (IFT) measurements and calculation of spreading coefficient were performed considering two different scenarios. In the first scenario, SDBS was added to... 

In this paper, the effect of silica nanoparticles on oil production due to the spontaneous imbibition of brine into oil-wet sandstones has been studied. The imbibed fluids were NaCl 3 wt. % solutions containing various concentrations of nanoparticles and the recovered oil for each solution was compared. The results revealed that nanoparticles yielded more oil recovery. Nanofluid was used after brine imbibition, and the oil recovery increased from 17.8% to 40% while in the case of using the same nanofluid as the first imbibed fluid the oil recovery was 53%. Also, the results indicated that the oil recovery depends on nanoparticle concentrations. © 2019, © 2019 Taylor & Francis Group, LLC  

Application of nanoparticles for wettability alteration offers a practical approach to resolve some surface-related problems encountered in the nowadays technological process. Examples are underground/subsurface engineering implications, including the enhanced oil recovery from the oil-wet carbonate reservoirs. However, the common wettability evaluating techniques such as contact angle and flotation cannot be representative of the dynamic phenomena occurring at the pore scale and hence are unable to give accurate information about the process. Therefore, in the present work, the electrokinetic evaluations are utilized to explore the wettability alteration of initially oil-wet carbonate rock... 

A novel nebulizing spray hydrolysis approach was used for preparation of semi-transparent superhydrophobic coatings. Methyltrimethoxysilane was dissolved in water:ethanol mixture and ultrasonically sprayed on different substrates. Superhydrophobic coatings with a contact angle (CA) as high as 164° and a sliding angle below 5° were obtained. FESEM and AFM revealed a hierarchical micro-nano binary structure with nanometric roughness of the coatings. The coated glass substrate exhibited transmittance close to 80%. The prepared coating showed great self-cleaning and water jet repellency behaviors. The superhydrophobicity of the samples was remained after subjecting to ambient conditions for 50... 

Liquid-liquid two-phase flow is capable of boosting heat transfer in microdevices compared to the single-phase and gas-liquid flows. A thorough investigation is performed here to characterize the heat transfer in water-oil flow in a microtube. Finite element method along with the level-set model is employed for numerical simulation. A main part of this paper is devoted to studying the effect of wettability on the heat transfer performance. Four contact angles of 0°, 30°, 150°, and 180° are investigated, which revealed that the contact angle of 150° produces the highest Nusselt number (Nu). Triple points form at this contact angle, and the slugs slide on the wall, which results in more... 

Wettability is one of the most important factors which significantly influences solar still efficiency. Moreover, it determines the condensation mode, i.e., filmwise or dropwise condensation. In the present study, materials with different wettability were applied as the condensing surface to evaluate the effect of wettability on the distillate production of a single slope solar still. To compare the effects of dropwise and filmwise condensation on the condensate yield, the wettability of the condensing surface was changed by applying a nano-silicon solution according to a dip coating technique. All the experiments were conducted at three surface inclination angles. The results revealed that... 

In this study, polyaniline nanoparticles (PANI NPs) in emeraldine base (EB) form were prepared by a modified method and characterized by FTIR and UV–vis spectroscopies. The average size of the nanoparticles was 140 nm measured by DLS method. The nanoparticles were embedded into polylactic acid (PLA) nanofibers prepared by electrospinning method. It was found that inclusion of PANI NPs in PLA resulted in reduced diameter of the fibers during the electrospinning process. Also, the surface of nanofibers appeared smooth in FE-SEM images without formation of beads. Improvement in mechanical and electrical properties of PLA/PANI nanofibers over the neat PLA nanofibers implied a good dispersion of... 

In this study, the effect of hydrophobicity of environmentally responsive surface-modified silica nanoparticles on the stability and surface activity of the nanoparticles is examined. To this end, n-propyl, n-hexyl, or n-octyl chains and methoxy poly(ethylene glycol) chains at various quantities were coated covalently on the surface of silica nanoparticles to regulate the hydrophobicity of the responsive nanoparticles. Various experimental tools such as stability analysis, interfacial-tension and contact-angle measurements, and emulsion formation were performed to investigate the effect of hydrophobicity. It became evident that the presence of the hydrophobic agents influences considerably... 

Foam flooding has been applied as a promising method in enhanced oil recovery to obviate the challenges of gas flooding such as fingering, channeling and overriding. However, long-term foam stability is crucial for mobility control. In this work, the effective mechanisms on foam stability in the presence of CaCO3 nanoparticles were assessed both theoretically and experimentally. The static and dynamic behaviors of cationic surfactant (HTAB) foam in the presence of CaCO3 nanoparticles with different hydrophobicity were evaluated. The CaCO3 nanoparticles were treated with a series of long-chain fatty acids to generate a range of wettability. Afterward, the underlying mechanisms were revealed... 

Solar stills are considered an environmentally friendly technique to produce fresh water. The condensation surface plays an essential role in controlling the efficiency of the solar still. This main parameter is critically affected by the wettability of the condensation surface that affects the condensation mechanism, namely drop-wise or film-wise condensation. This study aims to enhance the efficiency of solar stills by altering the surface wettability hence changing the condensation mechanism using nanomaterials. In this experimental work, different condensation surfaces were coated by silicone nanoparticles to change the condensation mechanism from film to dropwise. Scanning electron...