Sharif Digital Repository

Due to the decrease in oil reserves in the world, increasing population and the growing demands for oil consumption in the world, increasing the oil recovery from oil reservoirs has become more important. Increasing the amount of oil production efficiency by using low salinity water/modified salinity water has been highly appreciated during the last two decades. Low-salt water is a new method, due to its advantages such as low cost, simplicity of operation and low environmental hazards. It is believed that low salinity water can alter the rock wettability from a more oil-wetting state to a more water-wetting state. In order to be able to predict the performance of low salinity water... 

increased cohesion up to 4H pencil. Results of immersion test in water showed stability of coatings. Polarization test in naphtha and water mixture for stainless steel, copper and aluminum meshes demonstrated 98.89%, 86.25% and 66.6% protection efficiency respectively. In order to study of oil and water separation efficiency, mixtures of water and naphtha with different content of naphtha were used. Separation test for 200μm St.St mesh in different slopes demonstrated that changing of slop increase separation efficiency up to 95.5% for water and up to 100% for naphtha. Separation test for meshes with different pore size demonstrated that meshes with small pore size are more appropriate for... 

One the basic challenges during drilling of both vertical and horizontal wellbores is due to mud filtrate invasion into the formation. Addition of nanoparticles to composition of drilling fluid has been recognized as a measure of control and reduction of filtrate invasion. Despite notable advances in formulation of nano-enhanced drilling fluids, effects of surface wettability of nanoparticles on their performance have not been studied with any precision. Moreover, return permeability of a grain packed porous media after extreme invasion by mud filtrate has not been experimentally measured in a radial system, yet. The last but not least, Generation and development of mud cake opposite the... 

From previous years, water injection was considered as one of the most common methods for enhanced oil recovery. But recently much attention has been paid on the use of low salinity water (LSW) as an enhanced oil recovery fluid. The main mechanism that causes improve oil recovery is wettability alteration to a more water wet state. The change observed in recovery factor during LSW flooding induced from changes in relative permeability and capillary pressure when different levels of salinity are used. However, a few researchers tried to evaluate how macroscopic flow functions depend on the salinity of injected water. To this end, a series oil displacements by water performed on sandstone rock... 

Recent studies in nanotechnology field have shown this technology could solve many challenges and needs in oil and gas industry. As yet, many applications of nanoparticles in enhanced oil recovery have been reported. One of the most important applications is wettability alteration due to presence of nanoparticles in injecting fluid, which has recently been studied by several research groups. These studies indicate that, presence of nanoparticles in injecting water would improve oil recovery. However, there is no adequate information about the mechanisms affecting fluid flow in reservoir rock and its mathematical modeling.The aim of this project is to evaluate the effect of injection of... 

In this research we aim to find enhance oil recovery mechanisms involved in nano-bio material injection by micro model apparatus which has not been studied before. Especially for injection in heavy oil and shaly porous media that forms most of heavy oil reservoirs. To this end, microscopic images from injection of nano-bio materials to shaly patterns have been taken and analyzed to find the process mechanism. Also amount of enhance oil recovery in different conditions like type of microbe forming bio material, nano-bio material concentration and type of flow pattern (shale characteristics including length, direction and distance from injection and production wells) will be studied.Three... 

Nowadays, due to limitation of production from conventional oil reservoirs, enhanced recovery from heavy oil reservoirs is of great concern. However, production from these energy resources is not a simple task and production using common technologies is not easily exploitable. Heterogeneous structure and also high surface tension between injected fluid and reservoir oil are of the main challenges during water flooding processes in heavy oil reservoirs. The high surface tension force causes a large part of the oil remains in the reservoir after the water flooding operation. One method for overcoming this problem is the use of surfactants that reduces capillary forces and consequently... 

The Low salinity water flooding is one of the important methods of secondary and tertiary oil production in which many expert petroleum-production engineering working on it in recent two decades. There are some basis mechanisms for low salinity method presented in the literatures including fine migrations, alkaline flooding, multicomponent ionic exchange, electrical double-layer expansion and pH-driven wettability alteration. The main approach is generating low salinity mechanism especially wettability alteration in OpenPNM framework. OpenPNM is a python base framework developed by Jeff Gostick for porous media modeling. OpenPNM has paved the way for extracting pore network models (PNM) from... 

The present thesis investigates the micro-droplet dynamics in an inclined channel covered with flexible structures. For this purpose, the DPD (dissipative particle dynamics) method is used to study the behavior of particles present in the flow, including the droplet, the fluid around the droplet, and polymeric structures. This model leads to a more accurate representation of flow hydrodynamics and indicates the way for exploring and understanding complex fluid properties in real flows. The first part of the thesis deals with the dynamics of rising bubbles attached to a vertical wall under different wettability conditions. Even though bubbles rising freely in a liquid have extensively been... 

Drop penetration into the capillary tube, as a classical problem, has been studied over 100 years. But there are a few studies that investigate forced impregnation of capillary tubes, which has major application in coating, inkjet printing and rain drop penetration into the soil, have been made. A comprehensive numerical investigation on millimeter droplet impact dynamics on a thick capillary tube with micrometer sized pore is conducted and validated against experimental data. This work is extended to oblique impact of drops into pores and normal impact on nanoscaled pores. We apply the finite volume numerical method to solve the time-dependent governing equations of continuity, momentum in... 

There are considerable investigations on wettability alteration in carbonate reservoirs in recent years. The presence of ions including Ca, Si, Al etc in natural carbonate rocks and also the presence of various fatty acids, resins, asphaltenes etc in crude oil makes it difficult to understand the complex mechanism of wettability alteration by using surfactants. Furthermore there is still a conspicuous lack of dynamic wettability alteration model to demonstrate the dynamic behavior of cationic surfactants during wettability alteration. It is also widely accepted that cationic surfactants have substantial impact on changing the wettability of strongly oil-wet matrixes to a more water-wet... 

Considering the world's diminishing oil reserves, as well as the growing demand for oil and energy consumption, Enhanced Oil Recovery (EOR) techniques are becoming increasingly important in the attempt to improve oil production. Engineering salinity waterflooding has gained widespread attention and popularity in the last two decades due to its environmental friendliness, lack of expensive additives, low operating costs, and ease of use as an oil extraction process. The goal of this study is to use an innovative method to develop a mechanistic approach model that simulates and forecasts the mechanism and performance of the engineered water flooding process. Wettability alteration, the most... 

So far, many studies have been carried out on the core-scale regarding the effects of hysteresis on the macro-scale properties of systems including fluids and porous rock, however, many issues related to the physics of the problem (especially regarding the way fluids are distributed and the trapping of the non-wetting phase) at the pore-scale need further investigation. In the process of multiphase fluid flow in porous media, hysteresis refers to the dependence of the results of the fluids’ displacements on the history of fluid saturation and the direction of saturation changes (increasing or decreasing). The first step to investigate the hysteresis effect is to determine the amount of fluid... 

Gravity drainage is the self-propulsion of oil downward in the reservoir rock. Under favorable natural and operational conditions, it has been found to effect recoveries comparable to water displacement. With modern technical knowledge, the operator can often make a choice between dissolved gas drive, water drive and gravity drainage as the principal recovery agent in a reservoir. So far, gravity drainage has received less consideration than the other two. Gravity drainage is one of the most important processes taking place in fractured reservoirs and it plays a major role in oil recovery from low permeability matrix blocks during gas injection process. Gravity drainage is responsible for... 

Oil reservoirs, have integrated identity; that is they consist of different parameters such as wettablity, initial water saturation, capillary and gravity forces, etc. which are related to each other and affect ultimate recovery simultaneously. In fractured reservoirs, other parameters such as fractures and complex geological structures are also considered  among  important  parameters  which  affect  ultimate  recovery.  Due  to  large  amount  of reserves,  fractured  reservoirs  are  subject  to  different  studies  and  simulations.  In  this  research, different  parameters  which  affect  ultimate  recovery  in  fractured  reservoirs,  are  studied  and simulated. Different  studies ... 

Recent experimental studies have demonstrated that the lowering of brine could alter the wettability of the oil-brine-rock systems from an oil-wetting state toward a more water-wetting state. This so-called “Low-salinity effect” (LSE) is one of the main effects of the enhanced oil recovery technology based on low-salinity waterflooding. “Double layer expansion” (DLE) in the thin brine film is proposed as the principal mechanism of this phenomenon. Nonetheless, the role of the electrical behavior of the oil/brine and rock/brine interfaces on the kinetics and dynamics of this process is not well understood. Moreover, since most of the previous works have either dealt with a thin film at... 

Nanoparticles can be applied as chemical agent in enhnaced oil recovery like surfactants and polymers. One of nanoparticles usefull capabilities is modification of their surface. This research investigates this capabilty of nanoparticles in enhanced oil recovery. Surface modification of nanoparticles with both agents can bring new abilities to these materials. Here surface of silica nanoparticles is modified by hydrophilic agent comprising PEG groups, hydrophobic agent comprising propyl group and both agents. FT-IR tests showed that grafting of modifiyng agents on surface of nanoparticles is well done. To investigate effect of nanoparticles surface modification on nanoparticles capability in... 

Wettability is the cause of many interactions today and is definitely effective in almost all processes where liquid and solid phases are in contact. Wetting controls by surface engineering can accelerate the process in the industry or improve the quality of daily life. Therefore, the fabrication of complex surfaces with a specific purpose and different wettability has attracted the attention of researchers. In this thesis, silica nanoparticles were synthesized to create roughness and reduce contact between surfaces and liquids at first. Then, using chemical compounds to reduce the surface energy, a transparent (94.20%) superhydrophobic and oleophobic coating was created on the glass. The... 

One of the most common methods for determining elastic moduli of rocks and porosity is acoustic velocity log. The elastic moduli of reservoir rock are widely used in geomechanical modelling, borehole stability and hydraulic fracture design. Carbonate oil reservoirs are known for heterogeneity and anisotropic nature. Therefore correlation of acoustic velocity and rock properties are generally challenging. Rock’s shear modulus is very important during saturating of sample with pore fluid because assumed it is independent of pore fluid type. However due to the several fluid-solid interaction mechanisms such as velocity dispersion, surface energy reduction and viscous coupling, shear modulus... 

The assessment of fluid transport in porous media is the main subject in oil reservoirs to understand the oil recovery efficiency. The efficiency of Enhanced oil recovery (EOR) processes depends on the surface properties and wetting behavior of oil reservoir rocks which are also affected by the electrokinetic behavior of solid part of the porous rock. Streaming potential measurement is one of the techniques to determine the electrokinetic properties. The streaming potential measurements using electrodes have recently been introduced in oil field applications and there are still significant uncertainties during the measurements and interpretation of streaming potential results. The Primarily...