Sharif Digital Repository

Among various chemical methods, alkaline flooding has a great potential for enhancing heavy oil recovery, especially for reservoirs which contain acidic crude oil. However, fundamental understanding about microscopic displacement mechanisms and macroscopic behavior during alkaline floods at different wettabilities is not well understood, especially in five-spot shaly models. In this work several alkaline floods are performed on a glass micromodel containing randomly distributed shale streaks at different wettability conditions. Various mechanisms responsible for enhancing heavy oil recovery during alkaline flooding are investigated at different wettability conditions. These mechanisms... 

A lubrication model is used to study the dynamics of nanoscale droplets on wettability gradient surfaces. The effects of the gradient size, size of the nanodroplets and the slip on the dynamics have been studied. Our results indicate that the position of the center of mass of the droplets can be well described in terms of a third-order polynomial function of the time of the motion for all the cases considered. By increasing the size of the droplets the dynamics increases. It is also shown that the slip can considerably enhance the dynamics. The results have been compared with the results obtained using theoretical models and molecular dynamics simulations  

Application of nano or biomaterials for enhanced oil recovery (EOR) has been recently much attended by petroleum engineering researchers. However, how would be the displacement mechanisms and how would change the recovery efficiency while nano and biomaterials are used simultaneously is still an open question. To this end, a series of injection tests performed on micromodel containing shale strikes. Three types of biomaterials including biosurfactant, bioemulsifier, and biopolymer beside two types of nanoparticles including SiO2 and TiO2 at different concentrations were used as injection fluids. The microscopic as well as macroscopic efficiency of displacements were observed from analysis of... 

The drainage of oil under gravity forces is an efficient method because it can farther reduce the remaining oil saturation to below that obtained after water flooding. This paper describes a series of visual experiments under forced gas invasion with special attention to the effects of wettability. From oil production history and image analysis, we examine a threshold criterion for displacement stability that is consistent with the results of gradient percolation theory. The effect of the destabilized front velocity on oil recovery and residual saturation is investigated for both wettability conditions. Different recovery rates occur with different fluid morphologies, which depend on the... 

In this work, application of silica nanoparticles for wettability alteration of initially oil-wet calcite was investigated through analysis of surface forces and DLVO theory. Doing so, the wettability and zeta potential of calcite surfaces were measured through the sessile drop method and an in-house experimental setup, respectively. Primary evaluation indicated that incorporating DLVO terms in the Frumkin-Derjaguin model was not sufficient to describe the wettability in an oil-wet calcite/nanofluid system. Sensitivity analysis showed that calculating the double-layer interaction using constant potential-constant potential boundaries along with structural hydrophobic forces (non-DLVO... 

Devising effective methods to reduce drag forces is of great interest as these methods could prevent the wastage of fuel and decrease carbon emission and the global warming rate. Since the invention of Liquid-Infused Surfaces (LISs) in 2011, numerous investigations have been conducted to study their capability in various applications. Due to recirculation or drawing of the penetrated liquid within the surface structure, these surfaces acquire a slippiness property. The conducted investigations showed that these slippery surfaces have great potential for reducing drag forces, whether in a laminar or turbulent flow. In the present work, we first briefly elucidate common drag reduction methods,... 

Microbial Enhanced Oil Recovery (MEOR) as a tertiary process employs microorganisms and their metabolites to reduce the residual oil saturation of the reservoir mainly through interfacial tension (IFT) reduction and wettability alteration. In spite of its great potential and the mentioned advantages, application of MEOR has been limited because of the lack of practical convincing experimental results. In this study, the effects of MEOR process on wettability changes and the reduction of residual oil saturation have been examined by providing microscopic visualization of two phase flow in transparent glass micromodels. Biosurfactant producing bacterial strain (Enterobacter cloacae) was... 

To obtain potentially applicable microorganisms to an effective in situ microbial enhanced oil recovery operation, bacteria that were compatible with the harsh conditions of a petroleum reservoir were isolated from a crude oil sample. The application of an oil spreading technique showed that all of the isolates were capable of producing biosurfactants from both the glucose and crude oil as carbon sources. The secreted biosurfactants could at least reduce the surface tension 20 mN/m and for one of the isolates; the surface tension value dropped below 40 mN/m. In addition, the contact angle measurements revealed that the produced biosurfactants could effectively alter the wettability of the... 

Employing a biharmonic boundary integral method with linear elements, coarsening dynamics of nanodroplets on topographical step heterogeneity is investigated. It is shown that the step height and droplet configuration have an influential effect on the dynamics. Increasing the step height slows down the process while locating the droplets close to the step boosts the coarsening rate. Considering a slip boundary condition enhances the dynamics and reveals a transition in the droplet migration direction. Our results reveal that increasing the surface wettability weakens the dynamics. Various types of the disjoining pressure over the step are also considered and their effects on the coarsening... 

Beside their worldwide abundance, oil recovery from fractured carbonate reservoirs is commonly low. Such reservoirs are usually oil-wet, thus, waterflooding leads into early breakthrough and low recovery due to the high conductivity of the fracture network, negative capillary pressure of the matrix and, consequently, the poor spontaneous imbibitions of water from fractures into the matrix during the course of waterflooding. In such problematic reservoirs, changing the wettability of the matrix toward water-wetness can improve spontaneous imbibition by changing the sign and, thus, the direction of capillary forces, resulting in an improvement of waterflood efficiency and, consequently, oil... 

A large amount of the discovered oil reserves are reserved in carbonate formations, which are mostly naturally fractured oil-wet. Wettability alteration towards more water-wet state reduces the capillary barrier, hence improving the oil recovery efficiency in such reservoirs. In this study, wettability alteration towards favorable wetting state was investigated by combining modified low salinity brine with surfactant during water flooding. The diluted brine was modified by increasing the concentration of Mg2+ and SO4 2−, individually as well as both ions in combination. Different brine formulations were tested experimentally through the observations of contact angle measurements and... 

The concerns for water availability, affordability and environmental consideration have motivated more research on the development of smart water injection for enhanced oil recovery process. Although wettability alteration has been considered as the dominant mechanism, there is an ample space in this area needs to be explored more. Therefore, a systematic series of experiments is designed and performed to examine the effect of salinity and ion type on the wettability of the carbonate rock surface to find the active mechanisms. For this purpose, the concentrations of different salts including NaCl, KCl, CaCl2 and MgCl2 are examined during 10 days of soaking for salts concentrations range of... 

Low salinity (LS) and smart water (SW) flooding processes which receive a great interest as cost-effective and environmental friendly techniques are relatively new enhanced oil recovery methods. Although shifting carbonate surfaces towards a water-wet state is the main mechanism behind these methods, effects of controlling factors (for instance: ion type or salinity) are already remained unsettled. In this regard, the effects of sulfate ion types (i.e. Na2SO4, MgSO4 and CaSO4) and their concentrations (i.e. 0–45,000 ppm) on wettability alteration are investigated using contact angle (CA) measurement technique. In addition, work of cohesion, work of adhesion and spreading coefficient of all... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Dynamic contact angle measurement; as a standard method for surface wettability analysis, is usually conducted through the analysis of sessile drops formed following the low rate injection of fluid from beneath through a drilled hole via an injection needle. However, understanding/characterizing the changes of drop contact angle from the point where the flat solid surface begins is not well discussed yet. Moreover, during the evaluation of size-dependent behavior of contact angle of millimeter-scale drops, the effect of the drilled hole is ignored. In this regard, in the current study, the experimental and thermodynamic characterizations of the sessile drop advancing contact angle... 

Engineered water (EW) flooding is one of the enhanced oil recovery (EOR) techniques in carbonate reservoirs. In this method, the wettability of reservoir rock is altered by controlling the amount of various ions in the injected brine. The thermodynamics of wettability is related to the surface interactions and stability of water film on a rock surface. It can be identified by calculating disjoining pressure isotherms. In this study, core flooding tests, contact angle and zeta potential measurements along with the disjoining pressure isotherm calculation by the DLVO theory were used to investigate the wettability alteration of dolomite rock. Four brines include reservoir formation water... 

Low salinity water flooding (LSWF) has the potential to enhance the oil recovery by affecting the fluid-fluid and rock-fluid interactions. Therefore, a systematic investigation on the effect of initial wetting state (water-wet or oil-wet) of pure calcite is conducted to study the importance of these interactions on the effectiveness of LSWF. In the case of initially water-wet cores, more oil recovery efficiency is observed for more saline water cases. To shed light on the possible involved mechanisms, dynamic IFT, dynamic contact angle (CA), oil/brine and rock/brine surfaces zeta potentials, and effluent pH are measured. It is shown that the short-term effect of IFT reduction and long-term... 

Interaction between rock-fluid and fluid-fluid can have a significant effect on oil recovery. Changing the wettability of reservoir rock toward more water-wet or less oil-wet state is one of the expected mechanisms during low salinity water injection (LSWI). pH and salinity are of the most eminent factors of injection water controlling the wettability state of a crude oil/brine/rock system during any waterflooding operation. A small change in pH can affect the surface charges at the rock/water and oil/water interfaces leading to wettability alteration in a porous medium. In this study, the synergic effect of salinity and pH on the wettability state of carbonate rocks is evaluated through... 

Wettability alteration is the principal low-salinity-effect (LSE) in many oil-brine-rock (OBR) systems. Our recent experimental results have demonstrated that wettability alteration by low salinity is slow. It is expected that the electrical behavior of oil/brine and rock/brine interfaces and the water film geometry control both the transient hydrodynamic pressure, and the time-scale of ionic transport in the film, thus the kinetics and degree of wettability alteration. In this paper, the electro-diffusion process induced by the imposed ionic strength gradient is simulated by solving Poisson-Nernst-Planck equations in a water film bound between two charged surfaces, using a finite...