Sharif Digital Repository

Samples of the V2O5 catalysts supported on nanostructures of TiO2 and γ-Al2O3 were synthesized via hydrothermal method for the oxidative dehydrogenation of propane (ODHP) to propylene. The TiO2 support was utilized in both commercial microstructures and prepared nanostructures from their corresponding salts. Furthermore,the γ-Al2O3 was also prepared from two novel methods. Moreover, the vanadium catalysts supported on hybrid TiO2 and γ-Al2O3 were prepared. The performances of the prepared catalysts were subsequently examined in a fixed-bed reactor. The main products were propylene, ethylene and COx.The vanadium catalyst over TiO2 and γ-Al2O3 had the best performance under the reactor test... 

Semiconductor-based photo catalysts, titanium dioxide (TiO2) especially, have been extensively studied for the oxidative photo destruction of organic pollutants in wastewaters and hydrogen production as a green energy source. Much effort has been made to remove the restrictions on the use of TiO2 and challenges related to the recovery of powdery photocatalysts. In this study, copper oxide (CuO) and Zirconium oxide (ZrO2) were used to synthesize nanocomposites. Composition of TiO2/CuO and TiO2/ZrO2 with different weight percentages of second dioxide was synthesized by chemical methods and structural properties of samples were studied by X-ray diffraction and scanning electron microscopy.... 

The most important raw material for production of titanium dioxide is titanium that used in Aerospace, Plastic, Pigment and Pharmacy industries. Due to the presence of titanium minerals in Iran, reduce imports of titanium dioxide is one of the goals of the Ministry of Industries and Mines to achieve self-sufficiency in the production of TiO2.One of the very rich sources of titanium is alluvial sands in northern of Iran. In this study the TiO2 high grade pigment production from these sources has been investigated. Titanium-bearing sands with 9.5% TiO2 are used to produce high grade TiO2 pigment. After magnetic separation stage and reach a purity of 16.2% TiO2, upgrading slag step is not... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

Photodynamic therapy that has been developed over last century, now has become more widely used medical tool for the treatment of various diseases such as cancer. This technique involves delivery of photosensitizing drugs, irradiation of light and motivation of drugs. The limitation of light penetration in body tissue, may resolve by application of upconversion nanoparticles. Upconverting nanoparticles could help treatment of cancer tumors in deep or critical points of body by converting high penetrating Near-Infrared emissions to higher energy visible emissions. In the present work, rare earth elements doped TiO2 nanoparticles are synthesized. The photodynamic properties of rare earth... 

Structure and morphology of titanium dioxide have an excessive effect on the photovoltaic properties of dye-sensitized solar cells (DSCs). Different approaches have been used to improve the efficiency of these cells. One is using a scattering layer. Studies have been shown that properties of scattering layer such as composition and morphology have great effect on photovoltaic properties of solar cell. In this project, the effect of cubic morphology of TiO2 as a scattering agent in photoanode of DSCs is studied. Titanium dioxide with various morphologies including nanoparticles, solid and hollow cubic structures have been synthesized by solvothermal and hydrothermal methods, respectively. The... 

Titanium dioxide is one of the most important first material in many industrial applications and for producing Titanium.Although it was discovered more than 200 years ago and has been commercially processed for 85 years, it is still being actively investigated. So far Iran imports TiO2. But some projects have been planned to produce pure TiO2 from Ilmenite and Titanomagnetite ore. In the present work production of highly purity TiO2 from Ilmenite ore by chloride leaching has been investigated. Chloride leaching has been accomplished by several stages of leaching in hydrochloric acid, reduction, crystallization, hydrolysis and finally calcination of the powder. According to the result... 

In this project, TiO2 nanoparticles were prepared by the sol gel method. The band gap of TiO2 was modified with transition metal ions Pt, Pd, Ni. The kinetics and photocatalytic degradation of AB92 investigated. The effect of some parameters such as pH and amount of photocatalysis and calcination tempreture were examined. Also effect of transition metal increase on surface morphology and photocatalytic activity were investigated by XRD, BET, SEM, DRS and FT-IR Techniques. Dyes are an abundant class of colored organic compounds that represent and increasing environmental danger. Azo dyes are well-known carcinogenic organic substances. Advanced oxidation processes (AOPs) have been proposed as... 

Pure NanoParticles of TiO2 and Nanocomposite catalysts of TiO2 , activated carbon (TiO2/AC) and multi-walled carbon nanotube (TiO2/MWCNT) were prepared by a sol –Gel method using TetraisoPropylorthotitanat (Tipt) as a precursor. The catalysts were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance uv-vis spectroscopy (DRS) and N2 adsorption – desorption measurements. The photoactivity of samples was evaluated by Acid Blue 92 (AB 92) degradation. The analysis results show that compared with pure Nanoparticles of TiO2, the spherical – shaped TiO2 particles are well – dispersed in TiO2/AC. In TiO2/MWCNT, the coating has special mechanism that... 

The efficiencies of perovskite solar cells have increased rapidly in recent years and reached about 22%. Which hopes to make this type of solar cell more functional. In the normal structure of perovskite solar cells, the presence of mesoporous TiO2 mesoporous layer has increased sustainability and efficiency. To create this layer, a common method is placing the sample in a furnace for 30 minutes at 450°C-500°C. Using the furnace, in addition to being time consuming, has a high energy consumption. In this study, we tried to create a TiO2 mesoporous layer with the help of lighting. To create TiO2 mesoporous layer, What causes porosity in the layer is the removal of ethyl cellulose and create... 

Iran is one of the richest historic countries in the world, as extention of cultural heritage and historic building is unique. Infestation of lichens to those heritages for doing strategic actions wants the coordination of systems and organizations and universities. All the actions that do in this field, about the conservation and preservation of heritage made by stone related to architecture, be limited to lasers, electromagnetic waves, and application of jet methods such as sand storm, water jet, and prior to this mechanical and handful methods that approximately all be destructive. Application of nanoparticles of titania, as a smart photocatalytic material with antimicrobial and... 

Enanthioselective synthesis of biological molecules are so important in synthetic chemistry, and because of their biological activities, β-amino carbonyl compounds have earned so much attention in this area of chemistry. Mannich reaction is a classical method for synthesis of these molecules. The Mannich reaction is a three-component reaction between an enolizable CH-acidic carbonyl compound, an amine, and an aldehyde producing β-amino carbonyl compounds. But acidic or basic difficult circumstances, long reaction time, low yield and enantioselectivity, are the drawbacks of classical methods. In this project, we used titania-based solid acid as an enantioselective catalyst to overcome these... 

In this research, carbon nanotubes (CNTs) and CNT coated by titanium dioxide (TiO2) were used as adsorbents for desulfurization. Photocatalytic oxidation by titanium dioxide Degussa P-25 nanoparticles (as photocatalyst) immobilized on a porous and low-density support called “perlite” and CNT/TiO2 was perused. TiO2-coatings were prepared by liquid phase deposition method.This is a wet process for the formation of metal oxide thin films on substrates. The coating of nanotubes with TiO2 was confirmed by IR and EDAX and morphological properties were observed by SEM analysis.The physical properties of adsorbents were determine using BET.Dibenzothiophene (DBT)dissolved in acetonitrile was used as... 

This research tries to simulate the conditions of nanosized TiO2 powder production from pure commercial precursors, to produce nanosized TiO2 powder by leaching kahnouj ilmenite concentrate. For this purpose, the ilmenite concentrate was first oxidized to study the kinetics and optimization of oxidation process before leaching. Then the effect of pre-oxidation on the iron and titanium leaching efficiency was studied. Then the reductive leaching of concentrate using zinc and iron powders as reducing agent for Fe (III) to Fe (II) reaction was studied. The effect of reducing agent as well as oxidation and reduction on the leaching efficiency was studied. At the next step the optimum conditions... 

Several nanostructured photocatalysts were prepared by sol-gel, hydrothermal and precipitation methods. The products were characterized by X-ray diffraction (XRD), nitrogen adsorption, UV-VIS diffuse reflectance spectroscopy, fourier transform infrared absorption spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM). Their Photocatalytic activities were evaluated by degradation of organic pollutants in liquid-solid system. In this research work, the influence of metal oxide, copper oxide, on structure of nanocrystalline mesoporous titanium dioxide were evaluated. Different molar percentages of copper oxide on the surface of titanium dioxide were... 

Ultrafine- and fine-grained aluminum matrix nanocomposites were fabricated by friction stir processing (FSP) of 5052 Al alloy sheets containing different volume fractions of pre-inserted TiO2 nanoparticles (2, 3, 5 and 6 vol%). Annealed and wrought (H32) sheets were processed at different rotational (w=800-1400 rpm) and traverse speeds (v=50-200 mm/min). A special design tool (concave shoulder and cylindrical pin with regular threads) without changing the rotation and traveling directions was utilized. It is shown that a homogenous distribution of the reinforcement particles throughout the metal matrix is attained at w=1200 rpm and v =50 mm/min after 4 cumulative FSP passes. Transmission... 

In recent years, investigation of mechanical properties of micro- and nano-structure materials, and peculiarly nanocomposites have been attracted a wide variety of researches. In this regard, friction-stir-processed (FSPed) metal matrix nanocomposites have been considered an important case with appropriate mechanical properties especially for fabrication of ultra-fine grained Al alloys and Al-matrix nanocomposites. In this research, Al matrix hybrid nanocomposites were fabricated via multi passes-friction stir processing (FSP) of Al-Mg alloy (AA5052) with different amounts (~2 and 3 vol%) of pre-placed TiO2 (30 nm) particles nanoparticles. It was revealed that employing of cumulative FSP up... 

Li-ion batteries have been widely applied as power sources for portable electronic devices. Recently, Li-ion batteries are considered as the most promising energy storage technology for electric vehicle applications however, fundamental improvements are needed. TiO2 (B) is attractive candidate for anodes in rechargeable Li-ion batteries, due to their low cost, non-toxicity and favorable channel structure for fast lithium mobility. It is predicted that synthesis of doped nanostructure of this material, through reducing the diffusion pathway and formation of crystal defects, will increase the capacity of TiO2(B). In this investigation, Co and V doped TiO2(B) nanowires are synthesized by... 

Carbon dioxide photocatalytic reduction is one of the promising methods used to produce a wide range of renewable hydrocarbon fuels using sunlight in the presence of photocatalysts. In this study, a series of Nickel and Bismuth doped titanium dioxide samples were synthesized by Sol-gel method. After performing photocatalytic carbon dioxide recovery experiments and finding the optimum percentage of Nickel and Bismuth doped titanium dioxide,Ni and Bi co-doped TiO2 sample showed the highest photocatalytic activity. Amount of methane production was 21.13 μmol/gcat in the presence of co-doped sample that was about 6.5 times higher than the amount of methane produced in the presence of pure TiO2... 

UF membranes are widely used in various industries now, a major type of these membranes are ceramic membranes which are resistant to high temperatures and corrosive fluids. In this thesis we developed an anisotropic UF ceramic membrane based on 20nm TiO2 nanoparticles on a prous sustrate. We had two major challenges, the first one was to find a suitable prous substrate and the second one was to find an appropriate coating method. Our main task was to optimise the process conditions to achive a crackless and uniform membrane layer with minimal ups and downs. Lots of coating methods and TiO2 inks have been tried, finally we used a coating method which we called it “Soft Blade Coating”, with...