Sharif Digital Repository

Photocatalytic membrane reactors (PMRs), coupling photocatalysts and membranes in a single system, have shown a considerable potential to reduce membrane fouling, which is one of the major drawbacks of using membranes to treat water and wastewater. In this study, the visible light-activated photocatalysts were incorporated into the polyacrylonitrile (PAN) casting solution to synthesize the photocatalytic composite membranes. The physicochemical properties and the morphology of the membranes and photocatalysts were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction analysis (XRD), ultraviolet–visible diffuse reflectance... 

Conventional wastewater treatment processes are not completely effective in removing vancomycin. In this study, affecting parameters on vancomycin degradation, such as pH, catalyst, initial vancomycin concentration, temperature, and reaction time were investigated simultaneously during a removal process based on titanium dioxide with ultraviolet irradiation in an aqueous solution. Titanium dioxide was synthesized and characterized using X-ray diffraction and scanning electron microscopy. The average size of the synthesized crystals was 4.7 (± 0.2) nm. Design of experiments was done by a central composite design based on the response surface methodology and multiple linear regression was... 

In this paper, the impacts of Maxwell nanoliquid transmission, rectangular with titanium oxide nanoparticles are explored over the triangular, chamfer blades. The innovation of this paper is the use of the number of chamfers, rectangular, and triangular blades at the top and bottom of a stretched plate to study physical nanofluid parameters such as temperature and the effects of magnetism. Also, by determining the appropriate height and length for the blades, we achieve the best optimization of temperature and velocity of nanofluid between the plate and the blades, which improves heat transfer and with a more and better effect of magnetic effects. The finite element method is utilized for... 

The metal sulfides with highly negative reduction potential and long life-span of photocreated electrons are conducive to being exceptional candidates for CO2 photoreduction, whereas they suffer from self-photo-oxidation (or photocorrosion) that puts the greatest impediment to their practical application. Up to now, the Z-type strategy is stated as a favorable solution to overtake photocorrosion of metal sulfides, while the eligible choice for coupling with these materials is still challenging. TiO2 with more negative onset potential holds favorable inherent peculiarities over other materials, which produces overlapped potential with various ranges of metal sulfides. In this investigation,... 

Volatile organic compounds (VOCs) represent a very important class of pollutants that causes serious health effects. There is an urgent requirement to establish efficient technologies that can reduce and control VOCs. Non-thermal plasma (NTP) is an emerging technology that can decompose low concentration VOCs. However, the low efficiency and high power cost are major hindrances in its commercialization. In this work, Co–Cu with TiO2 support catalysts are prepared by using the deposition precipitation method and utilized in post-plasma catalysis for the efficient degradation of toluene selected as a model VOC. The synergistic effect of Co–Cu/TiO2 with different Co/Cu molar ratios along with... 

In drilling industry, energy consumption counts from 20 to 40 percent of total costs. Enhanced water-based mud (WBM) drilling fluids with nanoparticles can save energy in drilling processes. An in-house Taylor-Couette flow system (TCS) was developed at Australian University (AU) to study WBM enhanced by Al2O3, SiO2, and TiO2 nanoparticles. The TCS is really a practical tool to help well drillers with a rough idea of viscosity when nanoparticles are added. The TCS for sure cannot substitute advanced rheometry. The goal of the present experiment is to produce a rough estimate in field operation. Experimental results were examined with several rheology models in our previous publications. In... 

Incorporating titanium dioxide (TiO2) nanoparticles into the polymeric matrix offers an opportunity to obtain nanocomposites with improved functionality. In this study, the commercial TiO2 nanoparticles (TNP) were surface treated by different concentrations of aminopropyl triethoxy silane (APTS) as a coupling agent and triethylamine (Et3N) as a surface grafting catalyst by an aqueous process to prepare a nanocomposite with superior properties. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were performed to confirm the successful surface modification of TNP. The prepared modified TiO2 nanoparticles (mTNP) with different weight fractions were used as... 

TiO2 nanotubes (TNTs) were synthesized hydrothermally and modified by Cu2O using a sol-gel method to provide photocatalytic activity in visible light. Cellulose nanofiber (CNF)-based films were prepared by adding TiO2, TNTs, and Cu2O-modified TNT (TNT-Cu2O). The TiO2-based nanoparticles (TiO2, TNTs, and TNT-Cu2O) were uniformly distributed in the base polymer to make compatible and flexible films. The incorporation of nanoparticles significantly enhanced the UV-shielding properties of the film while slightly decreasing the transparency. Incorporating nanofillers improved the film's mechanical and water resistance properties depending on the nanoparticle type. The TNT-Cu2O-added CNF film... 

A flexible, porous and biocompatible titanium dioxide nanotubes (TNT) - polyurethane (PU) film has been produced as a new scaffold for artificial vascular grafts. Synergistic improvements in the properties of vertical TNT and PU was reached, including enhancements in their biocompatibility, mechanical strength, flexibility and porosity. Open-ended (OE) TNT-PU and close-ended (CE) TNT-PU films were synthesized and their mechanical and biological properties were compared with their pure PU counterparts. TNT were attached to PU with a new strategy. The resulting flexible structure was hydrophilic and super hydrophilic in OE-TNT-PU and CE-TNT-PU scaffolds, respectively. The gas leakage during... 

Preparation of the defective TiO2 nanoparticles (NPs) have been recently in particular interest for its outstanding applications in visible-light active photocatalysis. In order to make TiO2 visible-light absorber, optical band gap should be modified especially via introducing structural defects like oxygen vacancies as an effective pathway. In this research, we prepared defective rutile TiO2 NPs with highly efficient photocatalytic activity under visible light. The NPs were synthesized by electric arc discharge in water as a cost-effective and environmentally friendly method with capability of defect formation which followed by heat treatment. The photocatalytic activity improvement... 

Simultaneous enhancement of osseointegration and bacterial infection prohibition through surface modifications is a challenging but promising approach to achieve durable implantation. To that end, we present a multifunctional surface coating composed of graphene nanolayers and hierarchical well-aligned TiO2 nanotubes with a nanoporous top layer (cRTNT). FESEM studies reveal tunable increasing island morphologies of graphene nanolayers (G) on cRTNT by a cyclic voltammetry process. XPS analysis shows that the enhanced interface chemistry is due to TiO2-carbon bonding. The roughness of the sample containing a medium amount of graphene, cRTNT-75%GO, was calculated ∼289 nm, which was 543% higher... 

Abstract: Commercially pure titanium and titanium alloys have been among the most commonly used materials for biomedical applications since the 1950s. Due to the excellent mechanical tribological properties, corrosion resistance, biocompatibility, and antibacterial properties of titanium, it is getting much attention as a biomaterial for implants. Furthermore, titanium promotes osseointegration without any additional adhesives by physically bonding with the living bone at the implant site. These properties are crucial for producing high-strength metallic alloys for biomedical applications. Titanium alloys are manufactured into the three types of α, β, and α + β. The scientific and clinical... 

The fabrication of supported noble metal nanocrystals (NCs) with well-controlled morphologies have been attracted considerable interests due to their merits in a wide variety of applications. Photodeposition is a facile and effective method to load metals over semiconductors in a simple slurry reactor under irradiation. By optimizing the photodeposition process, the size, chemical states, and the geometrical distribution of metal NCs have been successfully tuned. However, metal NCs with well-controlled shapes through the photodeposition process have not been reported until now. Here, we report our important advances in the controlled photodeposition process to load regular noble metal NCs.... 

The most common reasons for hard-tissue implant failure are structural loosening and prosthetic infections. Hence, in this study, to overcome the first problem, different bioinspired coatings, including dual acid-etched, anodic TiO2 nanotubes array, anodic hierarchical titanium oxide (HO), micro- and nanostructured hydroxyapatite (HA) layers, and HA/chitosan (HA/CS) nanocomposite, were applied to the titanium alloy surfaces. X-ray diffraction and FTIR analysis demonstrated that the in situ HA/CS nanocomposite formed successfully. The MTT assay showed that all samples had excellent cell viability, with cell proliferation rates ranging from 120% to 150% after 10 days. The HO coating... 

The features of heat transferral capability between metallic (Cu) and non-metallic (TiO2) nanoparticles suspended in the engine-oil (EO) third-grade base-liquid has been analysed under the influence of strong magnetic field. The numerical investigation of system of coupled differential equations for third-grade nanofluid flow model is accomplished via Quasi-linearization method (QLM). The stretching horizontal sheet is heated through convective heat process assuming the special effects of thermal radiation, joule heating, heat generation and viscous dissipation in the energy equation. The mass suction and slip velocity at the boundary of the sheet has been taken into account to enhance... 

TiO2 has a high bandgap energy with light absorption in the ultraviolet region making it non-efficient under visible-light. The purpose of the present work is to modify the properties of TiO2 by adding carbon and copper to its structure, in order to acquire an active nanostructure for photocatalytic oxidative desulfurization of model liquid fuel under visible light irradiation. In this regard, carbon doped TiO2 was first synthesized by a hydrothermal method, then Cu (II) were impregnated on carbon doped TiO2. The resulting photocatalysts were characterized by techniques such as XRD, N2 physisorption, SEM, TEM, DRS, EDX, PL, and FTIR. The effects of parameters including calcination... 

Investigations have shown the traces of antibiotics in surface water, groundwater, wastewater treatment plants, and drinking water. However, conventional wastewater treatment is not entirely effective for vancomycin degradation. Advanced oxidation is one of the most widespread methods of antibiotic degradation in aqueous media. Vancomycin was quantified by high-performance liquid chromatography. The Response Surface Methodology (RSM) based on Central Composite Design (CCD) was used to explore and optimise the effect of the independent variables on vancomycin degradation. Independent variables were as follows: pH (3–11), vancomycin concentration (15–75 mg/L), TiO2–clinoptilolite (25–125 mg in... 

Recently, numerous studies have focused on simulation and optimisation of combined cooling, heat, and power (CCHP) systems. This research, from a different perspective, aims to conduct a comprehensive review of the studies performed in the field of solar, geothermal or combined sources, and subsequently analysing the multi-objective evolutionary algorithms to identify the most efficient situation, which satisfy researchers' needs in order to attain a better performance in their ongoing or future research projects. It is worth noting that multi-objective optimisation in these cycles is based on optimising a thermodynamic term (exergy efficiency, thermal efficiency, etc.) and an economic term... 

In the present study, the ACF-TiO2 catalyst was synthesised and used as a catalyst for the destruction of toxic cyanide in both synthetic and real industrial wastewaters. The ACF-TiO2 catalyst was found to be micro-porous with the BET surface area of 163 m2/g. The effect of different operational parameters such as catalyst concentration, cyanide concentration, operation time, and ozone concentration were target parameters in the present study. The findings show that 500 mg/L of catalyst is the optimum value for the photocatalytical process to completely oxidise 25 mg/L of cyanide within 10 min. While it was found that 300 mg/L of catalyst in the presence of 200 mg/h ozone is enough to remove... 

For the first time this work reports a new idea to develop a round-the-clock self-cleaning coating which was successfully applied to preserve cultural heritage and modern artifacts under sunlight illumination and at night. To fabricate this structure, namely, H2:TiO2/WO3@Pt, soft templating and hydrogen treatment approaches were selected to enhance the performance of TiO2/WO3 photocatalyst, together with the addition of Pt plasmonic nanoparticles. The coating can be photochemically charged in the presence of sacrificial electron donors and keep its stability, benefiting from the remained electrons stock for over 10 h to clean the surface from aggressive pollution also at night, in absence of...