Sharif Digital Repository

High silicon fly ash (HSFA) utilized as a source of silicon in synthesizing of Na-A, -X and -Y zeolites through alkali fusion followed by hydrothermal treatment at 100 °C for 12 h. Various types of zeolites with different degrees of purity were prepared by changing Si/Al ratio of the reaction mixture from 1.6 to 3.0. In addition, exact boundaries of this ratio for synthesis of each zeolite type were determined. Furthermore, the effect of NaOH amount utilized in alkaline fusion step on crystalinity of samples investigated. The synthesized zeolites were characterized using various techniques including; XRD, TGA, FTIR, SEM and BET. The ion-exchange behaviors of zeolitic samples tested with... 

Hydroxyapatite (HAp) nanostrips were rapidly obtained during a mild microwave heating method. Applying microwave irradiation to Ca(NO3)2·4H2O/CTAB/Na2HPO4 precursor solution, the HAp precipitation process was occurred directly and without common crystallographic transformations including dissolution and slow recrystallization. The cationic surfactant CTAB was used as a soft template to modify nucleation and growth process. TEM investigations showed that the fabricated nanostrips had a width and length of about 10 and 55 nm, respectively. The X-ray diffraction pattern revealed that the fabricated well-crystallized and high purity hydroxyapatite nanostrips had a pattern similar to the bone... 

The use of a draft tube fluidized bed bioreactor (DTFBB) has been successfully demonstrated for the bioleaching of a chalcopyrite concentrate (Mousavi, et. al., 2005). In the present paper this technique was used for the bioleaching of zinc from a sphalerite bearing low-grade ore. A strain of the thermophilic bacterium, Sulfobacillus, has been isolated from the Kooshk lead and zinc mine near the city of Yazd (Iran) and is tested at temperatures 47 °C-72 °C. This is compared to leaching with a strain of the mesophile Acidithiobacillus ferrooxidans, which has been adapted to the high levels of zinc and the presence of the low-grade ore, and which was tested at temperatures 18 °C-42 °C. The... 

Chip-based micro fluidic separation systems often use serpentine channels to attain long separation lengths in a compact area. Such designs suffer from the dispersion, mostly 'racetrack' effect, due to the bends in the micro channels. The main goal of this paper is obtaining a model which has minimal racetrack in a serpentine geometry. A numerical analysis leads us to an optimized model which is different from previous attempts in this field. Our model uses modified turn radii, optimal length between bends with a constant zeta-potential boundary condition and a constant width through micro channel turns. It is shown that traveling fluid in this geometry has minimal dispersion as well as... 

Polyethylene/clay nanocomposites (PECNC) were synthesized via in situ Ziegler-Natta catalyst polymerization. Activated catalyst for polymerization of ethylene monomer has been prepared at first by supporting of the cocatalyst on the montmorillonite (MMT) smectite type clay and then active complex for polymerization formed by reaction of TiCl4 and aluminum oxide compound on the clay. Acid wash treatment has been used for increasing hydroxyl group and porosity of the clay and subsequently activity of the catalyst. The nano- structure of composites was investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Obtained results show that silica layers of the mineral clay... 

Synthesis of dimethyl ether (DME) via methanol dehydration were investigated over various catalysts, and via direct CO hydrogenation over hybrid catalysts composed of Al-modified H-Mordenite zeolite and Cu/ZnO/ZrO 2. H-Mordenite zeolite exhibited the highest activity in dehydration of methanol. However, its selectivity toward dimethyl ether was rather low. For this reason, the H-Mordenite was modified. Modification of zeolites was performed by wet impregnation method and considered catalysts were characterized by AAS, XRD and NH3-TPD analyses. Results of catalytic tests indicated that H-Mordenite modified with 8 wt% aluminum oxide was the best catalyst for synthesis of dimethyl ether from... 

Nanocomposites of poly(ethylene terephthalate) and two different montmorillonite-based organoclays were prepared by a co-rotating twin screw extruder. Dispersion of nanoclays in the polymer matrix was examined by TEM and XRD. Nanocomposites with lower content of organoclay showed exfoliated morphology while by increasing the amount of organoclay the intercalated morphology was more prevalent. Both organoclays had a good intercalation with PET and were uniformly dispersed within the polymer. Oxygen permeability of thin films of nanocomposites showed that the nanocompo-sites had better oxygen barrier properties than the neat PET. Tensile and impact properties of the nanocomposites also were... 

We have used a hierarchical multiscale modeling scheme for the analysis of cortical bone considering it as a nanocomposite. This scheme consists of definition of two boundary value problems, one for macroscale, and another for microscale. The coupling between these scales is done by using the homogenization technique. At every material point in which the constitutive model is needed, a microscale boundary value problem is defined using a macroscopic kinematical quantity and solved. Using the described scheme, we have studied elastic properties of cortical bone considering its nanoscale microstructural constituents with various mineral volume fractions. Since the microstructure of bone... 

The effects of H2O/SiO2, TMAOH/SiO2, Na/(Na+K), and SiO2/Al2O3 ratios in the parent gels on the crystallization of nanoparticles of T-type zeolites were studied. A Taguchi orthogonal experimental design with the above-mentioned parameters (each at three levels) was used to optimize the experiment parameters by the analysis of variances (ANOVA). Applying the Taguchi method significantly reduced the time and cost required for optimization. The synthesized products were characterized by X-ray diffraction and scanning electron microscopy. As a result of the Taguchi analysis, H2O/SiO2 and TMAOH/SiO2 were the most influencing parameters for the synthesis of zeolite T. © 2009 WILEY-VCH Verlag GmbH... 

A near fully dense mullite-TiB2-CNTs hybrid composite was prepared successfully trough spark plasma sintering. 1 wt%CNT and 10 wt%TiB2 were mixed with nano-sized mullite powders using a high energy mixer mill. Spark plasma sintering was carried out at 1350 °C under the primary and final pressure of 10 MPa and 30 MPa, respectively. XRD results showed mullite and TiB2 as dominant crystalline phases accompanied by tiny peaks of alumina. The microstructure of prepared composites demonstrated uniform distribution of TiB2 reinforcements in mullite matrix without any pores and porosities as a result of near fully densified spark plasma sintered composite. The fracture surface of composite revealed... 

Polymerase Chain Reaction (PCR) is an important and prevalent technique in biotechnology because of its crucial role in cloning DNA fragments and diagnostic applications. In the present study, a high-throughput two-phase PCR device is designed and fabricated which utilizes a serpentine microchannel together with a spiral structure. The former is for the droplet-generation and mixing and the latter is for the thermal cycling process. Moreover, the effect of diamond nanoparticles (diamondNP) on the performance of PCR is also investigated while using commercial PCR devices and the fabricated PCR device designed in this study. Using numerical simulation, it is shown that within the simple and... 

This study investigated the effects of combined utilization of wollastonite particles and recycled waste ceramic aggregate (RWCA) on high strength concrete (HSC) properties. Two groups of mixtures were manufactured: 1) concrete mixtures in which cement was partially replaced with wollastonite at values ranging from 10% to 50%, and 2) mixtures in which wollastonite was used at the aforementioned dosages and 50% of natural coarse aggregate was replaced with RWCA. In addition, 10% of cement weight micro-silica was added to all mixtures. The concrete behavior in terms of strength, durability, resistance against acidic environment, and performance under elevated temperatures ranging from 20 °C to... 

Nucleic acid amplification via polymerase chain reaction (PCR) is one of the essential and powerful methods used in a myriad of bio-assays in clinical laboratories. Application of microfluidic devices in biologically-related processes like PCR can result in the usage of less volume of reactant samples and reduce the processing time. By implementing PCR systems on centrifugal microfluidic platforms, automation and portability can be easily achieved. Although several methods have been developed, most of them are still dealing with challenges of the required high processing time. This study presents the numerical simulation of a fully automated PCR system with the goal of enhancing the mixing... 

Microfluidic-based concentration gradient generators (CGGs) have a number of applications in chemical, biological and pharmaceutical studies. Thus, precise design of the microfluidic system is crucial to maintaining the desired concentration gradient in microchannels. One of the design considerations is the length of microchannels in the structure of a CGG. A CGG with a short length fails to provide the complete diffusive mixing, while the size of the microchip would unfavorably increase by incorporating a long CGG. Considering a CGG as a tree-like structure consisting of T-shaped micromixers, the mixing process of the species at a straight microchannel has been solved analytically. Herein,... 

Nanocrystalline Y3-xMMxFe5O12 powders (MM denotes Misch-metal, x = 0.0, 0.25, 0.5, 0.75, and 1.0) were synthesized by a sol-gel combustion method. Magnetic properties and crystalline structures were investigated using X-ray diffraction (XRD), a vibrating sample magnetometer (VSM), and a scanning electron microscope. The XRD patterns showed that the single-phase garnet of Y3-xMMxFe5O12 was formed at x values ≤ 1.0. The saturation magnetization of powders increased with decreasing MM content and reached the maximum value at Y3 Fe5O12. The crystallite size of powders calcined at 800°C for 3 h was in the range of 38-53 nm. © 2008 American Ceramic Society  

In this paper, preparation of polyethylene/clay nanocomposites (PECNC) by in situ Ziegler-Natta catalyst polymerization was investigated. A Ziegler-Natta catalyst was first supported on montmorillonite (MMT) type clay and subsequently used for polymerizing ethylene. Clay and clay supported catalyst were characterized by Fourier transmission infrared and ICP method. X-ray diffraction (XRD) and transmission electron microscopy results show that silicate layers of the mineral clay in prepared nanocomposites were intercalated and exfoliated in the polymeric matrix. Differential scanning calorimetry results show that the prepared nanocomposites have higher crystallization temperature than pure... 

This study intends to replace polyethylene multi-layer films used in food packaging industry with single-layer polyethylene nanocomposites films. Nanocomposites of LDPE/LLDPE/ montmorillonite organoclay were prepared by melt compounding in a twin extruder and then film blown to prepare thin films. LLDPE-g-MA was used as compatibilizer to achieve better interaction between the blend and organoclay. Various compositions of organoclay and compatibilizer were prepared. The structure of nanocomposites was characterized by XRD and TEM. Permeability properties were measured using a permeability measuring set-up and aspect ratio of the particles was evaluated using permeability data. The results... 

Due to the increasingly serious environmental problems presented by waste tires, the feasibility of using elastic and flexible tire-rubber particles as aggregate in concrete is investigated in this study. Tire-rubber particles composed of tire chips, crumb rubber, and a combination of tire chips and crumb rubber, were used to replace mineral aggregates in concrete. These particles were used to replace 12.5%, 25%, 37.5%, and 50% of the total mineral aggregate's volume in concrete. Cylindrical shape concrete specimens 15 cm in diameter and 30 cm in height were fabricated and cured. The fresh rubberized concrete exhibited lower unit weight and acceptable workability compared to plain concrete.... 

A study was conducted to report an observation on the effect of nanoclay fillers on the α-relaxation in an epoxy resin. The observation provided useful facts about glass transition processes in nanoclay-filled epoxy composites. The investigation involved the synthesis of intercalated-exfoliated clay-epoxy compounds, by swelling an organophilic montmorillonite in an aromatic epoxy resin and polymerization. The epoxy resin used in the study was a diglycidyl ether of bisphenol A (DGEBA), EPON 828, with an equivalent weight of 184-190 g/eq from Hexion Specialty Chemicals. The epoxy resin was cured with piperidine, obtained from Sigma-Aldrich. Nanomer® 1.30E. An octadecyl amine treated... 

The liquid-phase dehydration of methanol to dimethyl ether was investigated over various materials including synthetic zeolites, namely, ZSM-5, Y, Mordenite, Ferrierite and Beta as well as silica and alumina. The key characters investigated were the Si/Al ratio and cation exchange. The results showed that the Mordenite zeolite exchanged with H+ exhibited the highest activity in dehydration of methanol. After finding the most active catalyst, the Mordenite zeolite was modified with Cu, Zn, Ni, Al, Zr, Mg and Na via wet-impregnation method to further improve its selectivity, and characterized by AAS, XRD, NH3-TPD, NH3-FT-IR and BET surface area techniques. It was found that these materials...