Sharif Digital Repository

Aim: SHARIF-HMIS is a new inertial sensor designed for movement analysis. The aim of the present study was to assess the inter-tester and intra-tester reliability of some kinematic parameters in different lumbar motions making use of this sensor. Materials and methods: 24 healthy persons and 28 patients with low back pain participated in the current reliability study. The test was performed in five different lumbar motions consisting of lumbar flexion in 0, 15, and 30° in the right and left directions. For measuring inter-tester reliability, all the tests were carried out twice on the same day separately by two physiotherapists. Intra-tester reliability was assessed by reproducing the tests... 

Of particular interest to restrict the short-circuit level of interconnected power systems is to exploit fault current limiter (FCL) technologies. FCLs let the system planners devise new reliable and rather economical substation configurations and provide the possibility of proposing a promising cost-effective and prompt solution to the fault current over duty problem in the existing substations. This paper attempts to assess reliability of substation architectures accommodating the FCL operation and, besides, numerically investigates the FCL's impacts on the substation reliability indices. In order to clarify the proposed approach, two case studies with and without FCL are analyzed and... 

With the rapid evolution of electricity markets and the need for higher economic efficiency of power industry, attempts for lowering down the maintenance costs as a large portion of system operation expenses seem imperative. Recognised as a crucial step in practical implementation of modern maintenance paradigms, e.g. reliability-centred maintenance, this study proposes an efficient method to quantify the generating units' criticality on the bulk power system reliability performance. The proposed approach utilises a solution concept of game theory and evaluates the contribution of each generating unit on the overall system reliability when a higher-order contingency occurs. The suggested... 

Increasing redundant paths in transmission grids has always been thought to be a tool to enhance service reliability. However, network equations by intertwining power flows through redundant paths impose more limits on systems with more redundancy. Accordingly, autonomous removing of a few lines may relief capacity limit violations in some contingency events thereby enhancing service reliability. This paper aims to study impacts of manual removing of transmission lines on composite system reliability. For doing so, the existing model is extended to consider optimal transmission switching (OTS) as a remedial action. The model minimizes total damage cost imposed by load curtailments. The... 

As the electricity market undergoes continuous evolutions, along with the widely-recognized outdated nature of the grid, system operators would have to be able to more effectively manage the system operation expenses since waves of maintenance costs and equipment investments would be anticipated in a few years to come. Strategic implementation of cost-effective reliability-centered maintenance (RCM) approaches seems to be a key solution. This paper proposes an efficient method to assess the component criticality for system overall reliability and further maintenance focuses. A solution concept of game theory, called shapely value, is proposed that is able to fairly identify the contribution... 

Demand response (DR) as a key integral part of the future smart grid is gaining a great and still growing focus of attention in nowadays electric power industries. However, many potential benefits of DR, although they have been envisioned to be significant, have not been yet thoroughly and quantitatively investigated. DR provides network operators with the opportunity to mitigate operational limit violations by load modification in place of load shedding when network reliability is jeopardised. This paper aims to comprehensively assess the potential impacts of DR on major attributes of service reliability in a residential distribution network. For doing so, firstly, load profiles for major... 

In this paper, a Markov model for reliability analysis of transmission lines equipped with a dynamic thermal rating (DTR) system is proposed. Moreover, a fuzzy procedure is proposed to determine an annual equivalent fuzzy DTR number to represent hourly variations of the line DTR. To implement the fuzzy annual DTR in composite system reliability analysis, an interactive method resolution technique for solving fuzzy optimization problems is developed. This method is chosen to address the fuzzy constraints associated with the lines equipped with the DTR system. Numerical results are presented using the 24-bus IEEE RTS, and demonstrate the validity of the proposed approaches  

In multi-state systems (MSS) reliability problems, it is assumed that the components of each subsystem have different performance rates with certain probabilities. This leads into extensive computational efforts involved in using the commonly employed universal generation function (UGF) and the recursive algorithm to obtain reliability of systems consisting of a large number of components. This research deals with evaluating non-repairable three-state systems reliability and proposes a novel method based on a Markov process for which an appropriate state definition is provided. It is shown that solving the derived differential equations significantly reduces the computational time compared... 

This paper aims to quantitatively evaluate and compare the reliability impact of employing an automatic loop restoration scheme in a typical distribution system, with and without pulse closing technology. Sustained interruptions, momentary interruptions and voltage sags are the three major attributes of the service reliability that are taken into account in the reliability case studies  

In this paper, a Markov model for reliability analysis of transmission lines equipped with a dynamic thermal rating (DTR) system is proposed. Moreover, a fuzzy procedure is proposed to determine an annual equivalent fuzzy DTR number to represent hourly variations of the line DTR. To implement the fuzzy annual DTR in composite system reliability analysis, an interactive method resolution technique for solving fuzzy optimization problems is developed. This method is chosen to address the fuzzy constraints associated with the lines equipped with the DTR system. Numerical results are presented using the 24-bus IEEE RTS, and demonstrate the validity of the proposed approaches  

Reliability evaluation of a large composite power system involves the consideration of numerous outage events and consequently extensive calculations. Therefore, applying justifiable simplifications such as the determination of an equivalent networks can be very useful in reliability evaluation of large systems. This paper presents a review of procedures which are directly or indirectly applicable to the determination of composite system adequacy equivalents. Following a brief discussion on the basic characteristics of the various methods, their limitations are presented. Concluding points regarding the methods and modeling schemes related to adequacy equivalent are presented at the end of... 

In distribution system planning studies, reliability evaluation is performed during optimization procedure to calculate the interruption cost, DISCO's income and to check the viability of constraints related to reliability indices. In each iteration of the optimization algorithm a special plan is evaluated that is different from other plans. So the configuration and specification of the network which is one of the input information for reliability evaluation is changing continuously that makes difficulties for this evaluation. To solve these difficulties, this paper presents a systematic method for reliability evaluation in distribution planning studies. The proposed approach can be... 

This paper develops a general framework for reliability assessment of multi-microgrid (MMG) distribution systems. It also investigates reliability impacts of coordinated outage man-agement strategies in a MMG distribution network. According to the proposed reliability evaluation framework, which is based on sequential Monte Carlo simulation method, distribution system is divided into smaller sections/microgrids based on protection sys-tem configuration and operating measures are efficiently simulat-ed considering different operation modes. In order to demonstrate the role of outage management strategy in reliability performance of MMG distribution systems, at first, the required features of... 

In recent decades, multistate two-terminal reliability problem has attracted several researchers, and accordingly many exact and approximation approaches have been proposed in the literature in terms of minimal cuts (MCs) or minimal paths (MPs) to address this problem. Here, an MP-based approximation approach is developed based on exact algorithms. With all the MPs at hand, the approach rearranges the MPs ascendingly with respect to their lengths and then sets the flow on some MPs to be zero which turns to reduce the computing cost in solving the problem. We provide the complexity results, and by employing some benchmarks and one thousand randomly generated networks illustrate that not only... 

In this paper, a special class of redundancy optimization problem with fuzzy random variables is presented. In this model, fuzzy random lifetimes are considered as basic parameters and the Er-expected of system lifetime is used as a major type of system performance. Then a redundancy optimization problem is formulated as a binary integer programming model. Furthermore, illustrative numerical examples are also given to clarify the methods discussed in this paper  

Variability and uncertainty of wind and photovoltaic (PV) generations greatly influence technical and financial aspects of power systems. This paper examines the potential impacts of large-scale wind and PV farms on reliability level of composite generation and transmission systems. At first, reliability models of renewable-based units are developed. In these models, both component failure rates and uncertainty nature of renewable resources are taken into account. Using the proposed technique, the multi-state analytical models of a wind farm placed in Manjil and a PV farm placed in Jask both in Iran are extracted. Then, reliability studies of high renewable-energies penetrated power system... 

This paper investigates the effects of service quality regulation on investing in distribution automation. Among different regulatory instruments for quality regulation, the Reward-Penalty Scheme (RPS) has been selected to evaluate the effect of monetary incentive on behavior of Electric Distribution Utility (EDU) for service reliability. By implementing different automation strategies, the value of enhancing reliability indices and consequently the value of rewards and penalties are calculated for each strategy. For achieving to more realistic outcome, ten years horizon is considered. Furthermore, in the calculation of reliability indices, the time varying failure rate of components is... 

This paper presents an approach for optimal operation of a grid-connected hybrid system to maximize the system expected generated energy while maximizing the electricity sale revenue. The hybrid system consists of a photovoltaic (PV) module, an electrolyser (EL), hydrogen storage tank (HS) and a proton exchange membrane (PEM) fuel cell (FC). The generated energy is sold to the distribution grid. During the grid interruptions, the hybrid system output is used as an emergency supply to serve the local load, hence increasing the supply reliability. The proposed approach splits the whole problem in two sub problems: revenue maximizing problem (RMP) and expected generation maximizing problem... 

This paper proposes a full-featured fault injection framework to assess reliability of FPGA-based designs. The framework provides non-intrusiveness, portability, flexibility and performance in reliability evaluation of FPGA-based designs against adverse effects of SEUs. It works in a non-intrusive manner, allowing the reliability of ready-to-be-released designs to be assessed independently, without any intrusion into their place and route characteristics. We have studied implications of framework's intrusiveness into design under test by comparing proposed non-intrusive framework with previous intrusive methods; up to 5% deviation in the number of effective faults is observed in intrusive... 

Variability and uncertainty of wind and photovoltaic (PV) generations greatly influence technical and financial aspects of power systems. This paper examines the potential impacts of large-scale wind and PV farms on reliability level of composite generation and transmission systems. At first, reliability models of renewable-based units are developed. In these models, both component failure rates and uncertainty nature of renewable resources are taken into account. Using the proposed technique, the multi-state analytical models of a wind farm placed in Manjil and a PV farm placed in Jask both in Iran are extracted. Then, reliability studies of high renewable-energies penetrated power system...