Sharif Digital Repository

The voltammetric performance of edge-plane pyrolytic graphite (EPG) electrode via adsorptive stripping voltammetry was investigated for study of the electrochemical behavior of omeprazole (OMZ) in aqueous solution. The results revealed that the oxidation of OMZ is an irreversible pH-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mechanism. The determination conditions, such as the pH values of the supporting electrolyte, accumulation time and scan rate were optimized. Simplicity, high reproducibility and low detection limit (3 nM) of the electrode response as well as wide linear range (0.01 to 4.0 µM) can be stated as significant... 

New achievements in the realm of nanoscience and innovative techniques of nanomedicine have moved micro/nanoparticles (MNPs) to the point of becoming actually useful for practical applications in the near future. Various differences between the extracellular and intracellular environments of cancerous and normal cells and the particular characteristics of tumors such as physicochemical properties, neovasculature, elasticity, surface electrical charge, and pH have motivated the design and fabrication of inventive "smart" MNPs for stimulus-responsive controlled drug release. These novel MNPs can be tailored to be responsive to pH variations, redox potential, enzymatic activation, thermal... 

In this study, we have investigated the bioleaching potential of a native strain of Acidithiobacillus ferrooxidans isolated from zinc and lead sulfide mines under varied ambient conditions of growth and substrate consumption. In the process of standardizing growth conditions to improve iron oxidation, bioleaching of zinc and lead is also found to be enhanced. The effects of pH, temperature, initial inoculum, Fe2+ and ammonium sulphate concentration on growth and bio-oxidation efficiency of the bacteria have been evaluated. The results indicate that the optimum pH required for the growth of the bacterium is 1.8; however, the same for maximum efficiency is 1.5. It is also found that pH has a... 

The adsorptive removal of terephthalic acid (TPA) and p-toluic acid (p-tol) by metal organic frameworks (MOF) of Cu-BTC, Fe-BTC, MIL-101(Cr) and MIL-53(Al) was investigated in this study. The influence of various factors including solution pH, contact time, and initial concentration of TPA and p-tol solutions on the adsorption behavior was evaluated. Different adsorption isotherms and kinetic models were used to fit experimental adsorption data. It was found that the Langmuir and Redlich-Peterson adsorption isotherms were adequate to represent the experimental data (R2 > 0.97) and that the adsorption kinetics was well-represented by a pseudo-second-order kinetic model (R2 > 0.98). The zeta... 

The objective of this study was to investigate the synergistic effect of TBP on the system D2EHPA/kerosense/M2+ with respect to the extraction of some transitional metals. Although the presence of M2EHPA as an impurity in D2EHPA shifts the extraction curves to lower pH, empirical results show that the extraction curves shift to the right due to the addition of TBP and the counterbalance effect of M2EHPA. The results indicate that the equivalent concentration of D2EHPA decreases as a function of concentration of TBP because of the formation of hydrogen bonds between TBP and D2EHPA. Based on this finding, the D2EHPA equivalent concentration was determined by using a modifying factor for TBP... 

Background: The bio-oxidation of ferrous iron is a potential industrial process in the regeneration of ferric iron and the removal of H2S in combustible gases. Bio-oxidation of ferrous iron may be an alternative method of producing ferric sulfate, which is a reagent used for removal of H2S from biogas, tail gas and in the pulp and paper industry. For practical use of this process, this study evaluated the optimal pH and initial ferric concentration. pH control looks like a key factor as it acts both on growth rate and on solubility ofmaterials in the system. Results: Process variables such as pH and amount of initial ferrous ions on oxidation by A. ferrooxidans and the effects of process... 

In this paper, attention is paid to synthesis and swelling behavior of a superabsorbent hydrogel based carboxymethylcellulose (CMC) and polyacrylonitrile (PAN). The physical mixture of CMC and PAN was hydrolyzed in NaOH solution to yield hydrogel, CMC-poly(NaAA-co-AAm). During alkaline hydrolysis, the nitrile groups of PAN were completely converted to a mixture of hydrophilic carboxamide and carboxylate groups followed by in situ crosslinking of the grafted PAN chains. A proposed mechanism for hydrogel formation was suggested and the structure of the product was established using FTIR spectroscopy. The reaction variables affecting the swelling capacity of the hydrogel were systematically... 

Liquid phase deposition is a method to grow conformal TiO2 films with good crystallinity on various substrates. The growth depends on the hydrophilicity of the substrate surface and we found that mica is a substrate capable of forming uniform and thick films. Films were grown using an aqueous solution of TiF4 through a hydrolysis-condensation process. We have studied films properties; morphology, porosity and thickness, in terms of growth conditions, i.e. TiF4 concentration, growth temperature, deposition time and pH. The porosity of films was shown to rapidly increase from about 18% to about 25% and remained the same for longer growth times. The growth process of films could be identified... 

The objective of this research work was to obtain a microorganism capable of decolorizing treated distillery wastewater (TDW). 21 isolated and procured microorganisms were screened for their percentage decolorization. The screening strategy was performed using three different culture media in two main steps. The primary screening was carried out in two stages. In the first stage 10 microorganisms had a lower than 25% decolorization of TDW (with 25% TDW concentration). In the second stage 8 microorganisms had more than a 48% decolorization of TDW. In the secondary screening all 3 different culture media, the effect of TDW concentration, pH and nitrogen source were studied. A fungus identified... 

The biological oxidation of ferrous ion by iron-oxidizing bacteria is potentially a useful industrial process for removal of H2S from industrial gases, desulphurization of coal, removal of sulfur dioxide from flue gas, treatment of acid mine drainage and regeneration of an oxidant agent in hydrometallurgical leaching operations. The main purpose of this study was to find optimum values of the process parameters on the ferrous biooxidation rate by immobilization of a native Sulfobacillus species on the surface of low density polyethylene (LDPE) particles in a packed-bed bioreactor using Taguchi method. Five control factors, including temperature, initial pH of feed solution, dilution rate,... 

The immobilization of cellulase onto non-porous ultrafine silica particles was studied. Cellulase was extracted from a Trichoderma reesei culture after partial purification with ammonium sulfate (pH = 5.0), which was then immobilized onto non-porous ultrafine silica particles, with or without the use of glutaraldehyde as a crosslinking agent. Cellulase was immobilized by adsorption onto ultrafine silica particles efficiently, as well as by covalent cross-linking with glutaraldehysde. Increasing the concentration of the free form of enzyme increased the amount of immobilized cellulase. The maximum enzyme immobilization happened at the free enzyme concentration of 0.48 mg/ml. In general, the... 

A mesophilic iron oxidizing bacterium, Acidithiobacillus ferrooxidans, has been isolated (33 °C) from a typical, chalcopyrite concentrate of the Sarcheshmeh copper mine in the region of Kerman located in the south of Iran. In addition, a thermophilic iron oxidizing bacterium, Sulfobacillus, has been isolated (60 °C) from the sphalerite concentrate of Kooshk lead and zinc mine near the city of Yazd in the center point of Iran. Variation of pH, ferrous and ferric concentration on time and effects of some factors such as temperature, cell growth, initial ferrous concentration and pH on bioleaching of low-grade complex zinc-lead ore were investigated. The results obtained from bioleaching... 

In this article, we synthesize a novel gelatin-based superabsorbent hydrogel via graft copolymerization of mixtures of acrylic acid (AA) and acrylamide (AAm) onto gelatin backbones. The polymerization reaction was carried out in an aqueous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N-methylene bisacrylamide (MBA) as a crosslinker. The hydrogel structures were confirmed by FTIR spectroscopy. The effect of grafting variables, i.e. concentration of MBA and APS, AA/AAm weight ratio, and reaction time and temperature, was systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling behavior of these absorbent polymers... 

A batch extraction of an essential amino acid, Phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as pH of initial aqueous external phase, electrolyte concentration in aqueous internal phase, carrier and surfactant concentration in emulsion, volume ratio of the organic to aqueous internal phase (Roi), volume ratio of the W/O emulsion to aqueous external phase (Rew) and time were examined and optimized using Taguchi method which was the first time of... 

The removal performance of total poly phenols and orthodiphenols (o-diphenols) content in olive mill waste (OMW) was investigated with a three stages cross flow laboratory scale rotating biological contactor (RBC) in the present study. Due to high COD and other pollutant existed in the original OMW, before biological treatment of OMW by the RBC system, physico-chemical treatment was effected for COD and other pollutant reduction. Inoculation of RBC was effected by sludge from olive oil factory, and microbial acclimation was continued to 49 days and the system was adapted to about 300ppm of OMW poly phenols and o-diphenols. In biological treatment, effect of operating parameters such as... 

In this paper, in order to control a nonlinear dynamic system via multi-model controller, we propose a systematic approach to determine the nominal local linear models. These models are selected from the local models bank and results in a reduced nominal models set that provides enough information to design a multi-model controller. To determine the initial local models bank, gap metric is used so that the distance between two successive local models is smaller than a threshold value. Then, a systematic approach that aims to get a reduced nominal models bank is developed. Based on this approach, first, a binary gap matrix is defined by combining gap metric and stability information. Then,... 

This article uses gap metric method to design a multi-model controller for nonlinear systems. In order to decompose the nonlinear system into a reduced nominal local models bank as much as possible, and assure the closed-loop robust stability and performance, the decomposition and designing of local controllers are integrated. To this end, robust stability, performance, and gap metric are incorporated to build a binary distance matrix that supports defining the driving and dependence powers for each local model. Then a best–worst analysis is employed considering the driving and dependence powers to find out the nominal local models. The proposed approach screens the value of all local models... 

In this paper, in order to control a nonlinear dynamic system via multi-model controller, we propose a systematic approach to determine the nominal local linear models. These models are selected from the local models bank and results in a reduced nominal models set that provides enough information to design a multi-model controller. To determine the initial local models bank, gap metric is used so that the distance between two successive local models is smaller than a threshold value. Then, a systematic approach that aims to get a reduced nominal models bank is developed. Based on this approach, first, a binary gap matrix is defined by combining gap metric and stability information. Then,... 

This article uses gap metric method to design a multi-model controller for nonlinear systems. In order to decompose the nonlinear system into a reduced nominal local models bank as much as possible, and assure the closed-loop robust stability and performance, the decomposition and designing of local controllers are integrated. To this end, robust stability, performance, and gap metric are incorporated to build a binary distance matrix that supports defining the driving and dependence powers for each local model. Then a best–worst analysis is employed considering the driving and dependence powers to find out the nominal local models. The proposed approach screens the value of all local models... 

Novel hydrogels based on zwitterionic monomer [3-(methacrylamido)propyl] dimethyl (3-sulfopropyl) ammonium hydroxide (MPDSAH) and a strong acid monomer (2-acrylamido-2-methylpropane sulfonic acid, AMPS) were synthesized through solution polymerization under normal conditions to achieve nearly quantitative gel yield. The structure of the gels was confirmed using infrared spectroscopy. Thermal properties were simultaneously studied by differential scanning calorimetry and thermogravimetric analysis (DSC/TGA). The effects of the polymerization variables on the swelling capacity of the products were investigated. It was found that, in a certain range of the monomers mol ratio, increase of AMPS...