Sharif Digital Repository

Magnetic reduced graphene oxide/polymer nanocomposites were prepared by in situ polymerization and grafting of polyacrylamide on the surface of functionalized magnetic reduced graphene oxide (rGO). Graphene oxide nanosheets were decorated with Fe3O4 nanoparticles, reduced and functionalized with 3-(trimethoxysilyl)propyl methacrylate, and then grafted with polyacrylamide. Grafting of polyacrylamide makes magnetic rGO hydrophilic and highly water dispersible. The prepared material was used as adsorbent for removal of an anionic dye, Congo red, and a maximum adsorption capacity up to 166.7 mg g−1 was obtained. The kinetics and isotherm of adsorption and the effect of experimental condition on... 

In this study, we prepared cerium oxide (CeO2) hybridized with reduced graphene oxide (rGO) nanosheets using the hydrothermal method. CeO2 and CeO2/rGO were evaluated as electrode materials for use in supercapacitor applications. The structure and morphology of the synthesized materials were investigated. Cyclic voltammetry tests determined a high specific capacitance of 581 F g−1 for CeO2/rGO at a scan rate of 10 mV s−1 in 2 M KOH. In addition, the CeO2/rGO electrode retained 91 % of its initial capacitance after 5000 consecutive cycles, thereby indicating its excellent electrochemical stability. The excellent stability of CeO2/rGO was due to a synergistic effect between CeO2 and rGO. CeO2... 

In this contribution, reduced grapheme oxides (rGO) with immobilized tin oxide (SnO2) nanocatalysts were synthesized via the Incipient Wetness Impregnation (IWI) method. To characterize the SnO2/rGO composites, several analyses including the; XRD, Raman, FTIR, ICP-OES, BET-BJH, XPS, TEM, and TPD were utilized. Then the effects of parameters including reaction time, total metal loading, and the initial sulfur concentration of model fuel in the dibenzothiophene (DBT) oxidation desulfurization process were evaluated. After determining the optimal conditions for the aforementioned parameters, the influences of 3 effective factors of the molar ratio of oxidant/substrate (O/S), the molar ratio of... 

V2O5-TiO2 porous layers were synthesized via micro-arc oxidation for the first time. The effect of the applied voltage on morphology, composition, and photo-activity of the layers was investigated. The layers, which consisted of anatase, rutile, and vanadium pentoxide phases, revealed an enhanced photo-activity. About 93% of methylene blue solution was degraded on the synthesized layers after 120 min UV-irradiation with a reaction rate constant of k = 0.0228 min-1. The band gap energies of the vanadia-titania and pure titania layers were calculated as 2.56 and 3.39 eV, respectively  

Porous carbon template decorated with mixed transition metals/metal oxides with tunable architecture is becoming increasingly important and attractive as a kind of novel electrode materials. In this way, mixed-metallic metal-organic frameworks (MOFs) provide an opportunity for fabrication of homogeneous mixed metals/metal oxides distribution in the porous carbon frame without any carbon precursor additive. Also, structures, dimensions and electrochemical performance of MOFs can be readily manipulated by simply tuning the metals molar ratio. In this study, we demonstrate the design and fabrication of petal-like NiCo/NiO-CoO metal/metal oxides with a rational composition embedded in 3D... 

Two-stage chemical deposition (TSCD) technique is used to produce ZnO, Mn2O3 and NiO films on soda-lime glass (SL-G) from an aqueous solution of zinc, manganese and nickel complex, respectively. The TSCD method enables the deposition of metal oxide thin films with a thickness which can be controlled during the preparation procedure. The ZnO, Mn 2O3 and NiO thin films were polycrystalline films which were adherent well to the substrates. The SEM micrographs clearly indicate that the zinc oxide layer is composed of oval shaped crystallites preferably orientated perpendicular to the surface of the substrate. The Mn 2O3 and NiO layers were closely packed on the substrate. These particles seem to... 

Concentration-dependent cyto and genotoxicities of graphene oxide (GO) and reduced GO (rGO) sheets on spermatozoa were studied. rGO sheets with various surface chemical states were achieved using hydrazine (N2H 4) hydrothermal (HT) reactions and green tea polyphenols (GTPs). Although 0.1 μg mL-1 graphene could not change sperm viability and kinetic parameters, <40% and 20% of spermatozoa were viable and progressively motile, after 2 h incubation with 400 μg mL-1 GO or rGO, respectively. All the graphene nanomaterials induced concentration- dependent reductions of adenosine triphosphate and NAD+/NADH produced by spermatozoa for motility and metabolic activity. While GO, N 2H4-rGO, and HT-rGO... 

Titanium oxide (TiO2)-based photodetectors were fabricated using a thermal oxidation technique. The effect of two different annealing temperatures on morphology, structure, and I-V characteristics has been investigated. TiO2/Si heterostructure exhibited diode-like rectifying I-V behavior both in dark and under illumination. Dependence in photoresponse on annealing temperature was observed that was related to effective surface area of quasi-one-dimensional TiO2 nanostructures. Fabricated TiO2/Si diodes in 850 °C as the lower annealing temperature showed higher responsivity and sensitivity compared with grown ones in 950 °C (R850 °C/R950 °C ∼ 5 and S850 °C/S950 °C ∼ 1.6). Rather good... 

Nanoscale graphene oxide (NGO) sheets were synthesized and used as carbocatalysts for effective oxidation of benzylic alcohols and aromatic aldehydes. For oxidation of alcohols in the presence of H2O2 at 80 °C, the NGOs (20% mass fraction) as carbocatalysts showed selectivity toward aldehyde. The rate and yield of this reaction strongly depended on the nature of substituents on the alcohol. For 4-nitrobenzyl alcohol, <10% of it was converted into the corresponding carboxylic acid after 24 h. By contrast, 4-methoxybenzyl alcohol and diphenylmethanol were completely converted into the corresponding carboxylic acid and ketone after only 9 and 3 h, respectively. The conversion rates for... 

Cu2O is an attractive material in terms of semiconducting properties and is considered a leading candidate in all-oxide photovoltaics. Electrochemical analysis of Cu2O, including Mott-Schottky (MS) and impedance spectroscopy (IS), provides a wealth of data on charge carriers, Fermi level and interface properties. MS and IS are usually measured in aqueous solutions. However, Cu2O is easily reduced or oxidized to Cu or CuO in aqueous solutions, the layer peels off after the analysis and there is a small voltage window for the tests. In some cases, an anti-corrosive n-type barrier layer is employed on top of the bare Cu2O electrode to make the measurement possible, which could result in... 

Modified tungsten oxide films by vanadium oxide provide neutrally coloring electrochromic electrodes for smart windows technology. In this study W-V-O mixed oxide films were fabricated by Nd:YAG pulsed laser deposition (PLD), λ=1064 nm, from mixed pressed powders of (WO3)1-x(V2O5)x, x=0, 0.09, 0.17, 0.23, 0.29 and 0.33, at 13.3 Pa oxygen partial pressure and 200 °C temperature on glass substrates. X-ray photoelectron spectroscopy (XPS) revealed V5+, V4+, W6+ and W5+ surface oxide states, where the ratio of W5+/W6+ enhances by the amount of vanadium in the films. Surface morphology was studied by scanning electron microscope (SEM) and optical properties by transmission-reflection spectra.... 

For the first time, the effect of calcination process on characteristics and catalytic performances of Pd supported on different MOFs (MIL-101(Cr), NH2-MIL-101(Cr), and HKUST-1) was evaluated. Besides, the various orders of calcination process and reduction one on Pd/MOF and Pd/calcinated-MOF were studied, and their performances in CO oxidation reaction were presented to find the effect of H2 and O2. Results showed that the effect of calcination and reduction processes on the catalytic activities and characteristics strongly depends on the nature of MOF. Among MIL-based catalysts, the catalyst with no calcination treatment showed the best activity. Among MNH2-based catalysts, high activity... 

For the first time, the effect of calcination process on characteristics and catalytic performances of Pd supported on different MOFs (MIL-101(Cr), NH2-MIL-101(Cr), and HKUST-1) was evaluated. Besides, the various orders of calcination process and reduction one on Pd/MOF and Pd/calcinated-MOF were studied, and their performances in CO oxidation reaction were presented to find the effect of H2 and O2. Results showed that the effect of calcination and reduction processes on the catalytic activities and characteristics strongly depends on the nature of MOF. Among MIL-based catalysts, the catalyst with no calcination treatment showed the best activity. Among MNH2-based catalysts, high activity... 

The novel N2O2 unsymmetrical tetradentate Schiff bases complexes are used as catalysts for the selective aerobic oxidation of cyclohexene. In general, conversion percentages decrease with increasing ΔEp and decreasing Eredox 0′. Catalytic activity increases with decrease of the number of electron-donating groups and the catalytic selectivity varies according to the types of substituents in the ligands. The catalytic system described here is an inexpensive method for selective oxidation of olefins, with advantages of high activity, selectivity, re-usability and short reaction times. Analysing GC and redox potential results shows a moderate correlation between selectivity and activity. © 2004...