Sharif Digital Repository

Dust deposition on the surface of solar systems is one of the main parameters that significantly affects the performance of such systems. In this study, the effect of dust deposition density on the performance of photovoltaic modules (PV) and photovoltaic-thermal systems (PVT) is numerically investigated. Accordingly, all layers of a monocrystalline silicon PV module for both systems are simulated. Moreover, the effect of various system parameters on the performance of both clean and dusty PV module and PVT system are studied. The studied parameters included: solar radiation intensity, ambient temperature, coolant inlet temperature, and coolant inlet velocity. The obtained results indicate... 

Control of Synchronous Motors at low speed has been the topic of several studies for the last years. Due to the lower amplitude of Back-EMF voltage in lower speed, it is inappropriate to merely rely on induced voltages for position estimation. In this paper, a new double carrier PWM modulation is presented in which two carrier frequencies are utilized for two legs of the inverter. This proposed method rectify the need of powerful processors which decreases the cost of the electric drive system. Employing a non-linear control system and an automatic gain control, ensures the sensorless control of the motor for a wide range of speed. © 2019 IEEE  

Wound-Rotor (WR) resolvers are similar to two-phase synchronous generators. Their difference is related to the excitation signal. While DC voltage is used for exciting synchronous generator, high frequency AC voltage is employed for that of resolver. The common waveform for excitation signal of resolver is sinusoidal voltage. However, preparing the high frequency sinusoidal voltage in the resolver to digital converter (RDC) is always a challenge. Therefore, in this paper different high frequency AC waveforms are applied as the excitation signal of the resolver and the estimated position, resulted from RDC, is discussed. The aim of this work is to find an appropriate excitation waveform that... 

In this paper, a new extended quasi-switched Z-source inverter, using a switched-inductor cell, is proposed. The most important advantage of the proposed inverter is achieving the maximum voltage gain in the lower duty cycle with less circuit components than similar previous inverters, which causes the modulation index value increase. Furthermore, it leads to less power losses and less voltage and current ripples. The employed control method in this inverter is the pulse width modulation (PWM) simple boost control method. In this paper, theoretical analysis and comparison results of the proposed inverter with other similar ones are prepared. In addition, the experimental results reconfirm... 

In modern wireless near-filed power and data telemetry systems such as Implantable Medical Devices (IMD), a data rate of several Mbps is required, while the power carrier frequency is limited to few MHz. Therefore, bit rate is comparable to carrier frequency, and the modulated power carrier signal has amplitude, frequency, or phase variation in every cycle. In this paper a very fast amplitude shift keying (ASK) demodulator circuit is presented. The proposed demodulator is able to demodulate a cycle by cycle ASK modulated signal, and a data-rate-to-carrier (DRC) ratio of 100% is achievable. The circuit extracts the clock by limiting the incoming ASK signal. Cycle by cycle demodulation is done... 

Microwave power modules are the result of integration of vacuum tubes and their respective power supplies. In these modules, volume and weight are very important factors because the modules are used in many portable applications. There are many parameters that they affect the volume and weight of the microwave power module. High voltage issues are one of these factors because the required voltages of vacuum tubes are high voltage. Thermal management relates to the module volume directly. In high-voltage high-frequency converters as power supplies of vacuum tubes, parasitic elements of the transformer are dominant. Tuning the transformer parameters leads to variation in the volume of the... 

This paper proposes an enhanced hybrid modular multilevel converter (MMC), which utilizes a combination of half-bridge submodules (HBSM) and at least one full-bridge submodule (FBSM). In the proposed structure, FBSMs work with half of the HBSMs nominal voltage in each arm. Due to the presence of FBSMs, HBSMs switching frequency drops significantly, which reduces the converter power loss compared to half-bridge based MMCs. Furthermore, because of redundant FBSMs, (2N + 1)-modulation can be employed to generate the output voltage without increasing the circulating current, thus, the converter performance is improved notably. Besides, with the redundant FBSMs, the converter can continue its... 

This paper introduces the concept of on-chip temporal optical computing, based on dispersive Fourier transform and suitably designed modulation module, to perform mathematical operations of interest, such as differentiation, integration, or convolution in time domain. The desired mathematical operation is performed as signal propagates through a fully reconfigurable on-chip photonic signal processor. Although a few numbers of photonic temporal signal processors have been introduced recently, they are usually bulky or they suffer from limited reconfigurability which is of great importance to implement large-scale general-purpose photonic signal processors. To address these limitations, this... 

Multi-port converters (MPC), used in multi-input/multi-output power electronic systems have low cost, low weight and low mass integrated control system. Besides these converters offer bidirectional and isolated ports, which are inevitable in some applications. Three-Port Half Bridge Converters (TPHBC) are the ones which have the lowest component count. But these converters suffer from a low Zero Voltage Switching (ZVS) range that is lost in medium to low load powers. Low ZVS range cause low efficiency, especially in low output powers. In this paper a modified Pulse Width Modulation (PWM) technique is introduced to increase the ZVS range of main switches which results higher efficiency and... 

The transmission capacity of traditional single core fibers is reaching its upper bound. Space-division multiplexing (SDM) leveraging multi-core fibers is considered to be a promising solution for this problem. Elastic optical networks (EONs) with Multi-core fibers (MCF) are a kind of SDM-enabled EONs (SDM-EON) providing larger transmission capacity. However, the resource assignment in these networks becomes more complex due to inter-core crosstalk. Another important issue to be considered in future networks is the time domain behavior of incoming traffic which means considering Advance Reservation (AR) requests, in addition to regular Immediate Reservation (IR) requests. In this paper, the... 

Using a combined musculoskeletal and finite element (FE) approach, this study aimed to evaluate stability-based muscle forces in a spine with adolescent idiopathic scoliosis (AIS) as compared to a normal spine; and subsequently, determine the effects of stress distribution on the growth plates (GPs) of the growing spine. For this purpose a nonlinear 3D FE model of one normal and one scoliotic thoracolumbar spine, consisting of GPs attached to rigid L1 to L4 vertebrae, were developed using computed tomography images coupled with a growth modulation using the Stokes’ model. Corresponding well with recent in-vivo and in-vitro studies, results of the models predicted intradiscal pressures at the... 

Depending on the reference frame, a proportional integral (PI) or proportional resonant (PR) controller is often utilized for current control in the three-phase PWM rectifiers. Due to the fact that the controller bandwidth is either smaller than the frequency of a specific order harmonic or the controller gain at that frequency is too low the harmonics cannot be effectively eliminated. Among all approaches introduced for harmonic elimination, selective harmonic compensation is believed to have a better performance. Selective harmonic compensation can successfully compensate for harmonics. It, however, forces a considerable computation burden on DSP. This paper proposes a new compensation... 

The current study was designed to assess the association between temporal variations in urban PM2.5 chemical composition, sources, and the oxidative stress and inflammatory response in an alveolar macrophage (AM) model. A year-long sampling campaign collected PM2.5 samples at the Sharif University in Tehran, Iran. PM-induced reactive oxygen species (ROS) production was measured both with an acellular dithiothreitol consumption assay (DTT-ROS; ranged from 2.1 to 9.3 nmoles min−1 m−3) and an in vitro macrophage-mediated ROS production assay (AM-ROS; ranged from 125 to 1213 μg Zymosan equivalents m−3). The production of tumor necrosis factor alpha (TNF-α; ranged from ~60 to 518 pg TNF-α m−3)... 

As elastic optical networks (EONs) are expected to convey high bitrate connections, a failure in these networks causes vast data losses. Thus, addressing the problem of survivability in EONs is of great importance. In this paper, survivability of an EON with multiclass traffic is investigated, where each traffic type needs specific protection mechanism and scheduling strategy. In particular, a connection request may demand for dedicated path protection, shared backup path protection, or restoration mechanism. Besides, it can tolerate a pre-determined delay and be scheduled at future time slots, referred to as advance reservation, or must be served immediately without any delay, referred to... 

Electrical efficiency of photovoltaic (PV) modules depends on their working temperature. Effective cooling is required in order to achieve higher performance. Pulsating heat pipes (PHPs) are compact heat transfer devices with high effective thermal performance due to the two-phase heat transfer mechanism. Since the lower temperature of PV modules leads to higher electricity generation and better efficiency, PHPs can be applied for PV cooling. In this work, the PV cooling by applying a single turn PHP is numerically investigated. In addition, a copper fin with the same dimensions as the PHP for cooling the PV panel is simulated to compare the performance of the PHP with a solid metal like... 

This paper presents a novel optical processing approach for exploring genome sequences built upon an optical correlator for global alignment and the extended dual-vector-curve-curve (DV-curve) method for local alignment. To overcome the problem of the traditional DV-curve method for presenting an accurate and simplified output, we propose the hybrid amplitude wavelength polarization optical DV-curve (HAWPOD) method, built upon the DV-curve method, to analyze genome sequences in three steps: DNA coding, alignment, and post-Analysis. For this purpose, a tunable graphene-based color filter is designed for wavelength modulation of optical signals. Moreover, all-optical implementation of the... 

An essential requirement for performing robotic assisted surgery on a freely beating heart is a prediction algorithm which can estimate the future trajectory of the heart in the varying heart rate (HR) conditions of real surgery with a high accuracy. In this study, a hybrid amplitude modulation- (AM) and autoregressive- (AR) based algorithm was developed to enable estimating the global and local oscillations of the beating heart, raised from its major and minor physiological activities. The AM model was equipped with an estimator of the heartbeat frequency to compensate for the HR variations. The RMS of the prediction errors of the hybrid algorithm was in the range of 165–361 μm for the... 

A major problem in a multiple output converter structure is the different power flow via its various outputs. This problem leads to unwanted input DC-link voltage. This paper studies full bridge based DC-DC converters with multiple outputs. The effect of power flow variation is studied and a regenerative converter topology which controls the DC-link voltage by space voltage vector modulation technique is proposed. The proposed converter has a fast response to control the DC-link voltage in an acceptable band. Simulation and experimental results are presented to verify the analytical studies. © 2018 IEEE  

The leakage current originated from the fluctuations of the common-mode voltage (CMV) is an issue in a transformerless grid-connected photovoltaic (PV) system. In this paper, a modified space vector modulation based on the Fourier transform analysis is proposed to reduce the leakage current in a three-phase quasi-Z-source inverter (qZSI). The CMV harmonic content in a qZSI contains low and high-frequency harmonics which cause safety and EMI problems respectively. By implementing the proposed modulation in a three-phase qZSI, the low-frequency harmonics of the CMV are mainly reduced. The distribution of the high-frequency harmonics is also modified in a way they can be simply filtered.... 

Excitation and propagation of the surface polaritonic rogue waves and breathers are investigated by proposing a coupler free optical waveguide that consists of a transparent layer, middle negative index metamaterial layer, and bottom layer of the cold four level atomic medium. In this planar optical waveguide, a giant controllable Kerr nonlinearity is achieved by sufficient field concentration and a proper set of intensities and detunings of the driven laser fields. As a result, various kinds of temporal surface polaritonic solitons, rogue waves, and breathers can be propagated in the narrow window for electromagnetically induced transparency. We find that the giant intensity and extreme...