Sharif Digital Repository

In the metal deposition process, the performance of the nozzle is crucial to the quality of clad. Continuous coaxial nozzles are broadly used in this process for repairing two- and three-dimensional parts, because it can create a homogeneous distribution of powder particles. In addition, an inert gas can be applied using this type of nozzles which shields powder particles and laser interaction zone, and prevents the surface from oxidizing at high process temperatures. However, when this type of nozzle is tilted from the vertical axis for cladding non-horizontal surfaces, the effect of gravity on powder particles affects the uniformity of powder distribution at the nozzle outlet. This matter... 

This research investigates the effect of process parameters on the geometry and properties of In625 parts, manufactured by the direct laser metal deposition (DLMD) process. For this purpose, eight parts, consisting of 5 layers on top of each other, were manufactured, and the effect of laser power, laser focal plane position, and scanning speed on the height, width, and surface smoothness of each of them was investigated using design of experiment (DOE). The experimental results showed that the height of the parts manufactured by 800 W/mm and 200 W/mm of energy density is 3.69 mm and 6.12 mm, respectively. The thickness of the parts manufactured by 80 W/mm and 200 W/mm of energy density is... 

Multilevel interconnect network of a macrocell for 7.5 nm technology node is designed with carbon based interconnects (CBI) and Cu. Results are compared. Constrains of using CBI is discussed. It is shown that by using CBI power dissipation associated with wires could decrease by 32%. To use GNRs for more than one metal pair, reverse wire pitch idea is proposed that prevents undesirable increase in the number of metal layers  

After silica coating of the prepared nickel ferrite nanoparticles, a micrometric layer of zeolitic material (analcime) was grown on the surface. To make the composites good host, surface modification was done with [BMIM]PF6 ionic liquid. Finally, the samples became antibacterial agents via loading the Ag and Au nanoparticles and denoted as X@IL/A/S/NF (X = Ag or Au). All the samples were well characterized by Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and N2 adsorption-desorption isotherms (BET) analysis methods. Antibacterial activity of the prepared samples... 

In this paper, electrical wire explosion (EWE) was used as a simple, clean, in situ method to synthesise nano zero-valent iron (nZVI) particles in liquid mediums. The structural and physical properties of the synthesised nZVI particles were characterised by x-ray diffraction, Brunauer–Emmett–Teller analysis, field emission scanning electron microscopy and transmission electron microscopy. The synthesised spherical nanoparticles, at a specific size of 10–50 nm, possessed large surface areas of approximately 13.27 m2/g, reinforcing the significant advantages of EWE, that is, less aggregation and in situ production of nanoparticles with enhanced removal efficacy, for groundwater treatment.... 

Interaction of the DNA thymine base with Cu+ and Zn3+ was studied to explore: a) The metal binding energy (MIA) of thymine with Cu+ and Zn2+ and b) The possible correlation between charge transfer and MIAs. The gas-phase Cu+ and Zn2+ affinities of thymine, as well as the Mulliken charges, on the complexed metal cations were both determined at the same computational level, including the density functional level and employing the hybrid B3LYP exchange correlation potential in connection with the 6-311++G (d,p) basis set. All the molecular complexes were obtained by interaction between the most stable tautomer of thymine and two transition mono and divalent (Cu+, Zn2+) metal ions. To probe all... 

This paper presents experimental results on the foaming behavior and compressive properties of AlSi7-3 vol.% SiC metal foam. Elemental powders of Al, Si, SiC and TiH2 were mixed, hot compacted and foamed at 750, 780 and 810 °C. It was shown that the addition of fine SiC particles (mean diameter of 3 μm) increases the melt expansion and improves the stability of AlSi7 foam. A less drainage in the cell structure was also noticed. Meanwhile, large irregular cells in the macrostructure and a slight degradation of the mechanical properties under compressive load were observed. © 2007 Elsevier B.V. All rights reserved  

In this article, a robust algorithm for prediction of forming limit diagrams (FLD) has been presented. The presented model is based on the "Marciniak and Kuczynski" (M-K) theory. Solution to the system of equations has been obtained by applying the Newton's method. Since the Newton's method usually has nonconverging problem, a particular backtracking algorithm has been developed and applied. In this algorithm, a technique for step length selection in the frame of gradient descent method has been implemented. Also for the convergence criterion the so-called "Armijo" condition has been used. For verification of the results, BBC2000 yield function and Swift hardening law for AK steel metal have... 

Two different types of welds, Metal Inert Gas (MIG) and Friction Stir Welding (FSW), have been used to weld aluminum alloy 5083. The microstructure of the welds, including the nugget zone and heat affected zone, has been compared in these two methods using optical microscopy. The mechanical properties of the weld have been also investigated using the hardness and tensile tests. The results show that both the methods could successfully be used to weld such alloy. The strength of the joints is comparable to the strength of the base metal in both cases. However, FSWed samples have shown higher strength in comparison to the MIG samples. The results also show that the extension of the heat... 

This study was focused on the heavy metal (Ni, Co, Mo, V, Mn, Fe, W and Zn) tolerance of fungi strains Aspergillus niger, Aspergillus foetidus and Penicillium simplicissimum. Aspergillus niger was exposed to a mixture of Mo, V and Mn at a mass ratio of 1:2:6 as approximately present in the spent refinery processing catalyst. This study highlights the adaptation of fungi strains to Tungsten and Vanadium to high concentration. The effect of different metals and metal concentration on different strains of fungi was evaluated. Results showed that Ni was one of the most toxic metals for strains of Aspergillus and Penicillium. Aspergillus foetidus was the least tolerant, in particular for Ni, Co... 

A green and simple synthesis method based on a two-step chemical vapor deposition approach has been developed to synthesize transition metal dichalcogenides flakes. With non-toxic precursor such as transition metal oxides and elemental sulfur, large-area, strong photoluminescent and uniform MoS2 nanoflakes were produced at a relatively low growth temperature (650 °C). Controlling the layer number and morphology was achieved only by precursor concentration without any oxide impurity revealed by SEM, PL and Raman spectroscopy. This method can be used to make wide range of metal chalcogenides such as ZnS, SnS2, PtS2 and PdS2  

Ceramic-magnetic nanoparticles (CMNPs) are attracting attention due to their various applications, especially in biomedical industries. Among them, spinel ferrite CMNPs have received considerable deliberations among different spinel metal oxides due to their fascinating characteristics. Spinel ferrite CMNPs are used for enhancement of the applicability of CMNPs without affecting the intrinsic advantages of iron oxide CMNPs. Spinel ferrites with doping agents have useful electrical and magnetic properties in various fields. Moreover, the replacement of metallic atoms in ferrites is promising to manipulate physical characteristics and improve their performance. Among different spinel ferrites,... 

Ethylenediamine-functionalized Zr-based metal-organic framework (MOF, UiO-66-EDA) was prepared via Michael addition reaction to investigate its potential for adsorption of heavy metal ions from water. Specifically, the influence of agitation time, solution pH, the dosage of the adsorbent, initial metal ion concentration, temperature, and coexistence of other metal ions was investigated on the removal efficiency of UiO-66-EDA towards Pb(II), Cd(II), and Cu(II) metal ions. The pseudo-second-order kinetic model governed the adsorption of these ions onto the UiO-66-EDA. Langmuir isotherm model matched the experimental isotherm of adsorption with a maximum adsorption capacity of 243.90, 217.39,... 

Density functional theory (DFT) calculations were performed at the B3LYP level with a 6-311++G(d,p) basis set to systematically explore the geometrical multiplicity and binding strength for complexes formed by Li+, Na+, and K+ with cytidine and 2′-deoxycytidine. All computational studies indicate that the metal ion affinity (MIA) decreases from Li+ to Na+ and K+ for cytosine nucleosides. For example, for cytidine the affinity for the above metal ions are 79.5, 55.2, and 41.8 and for 2′-deoxycytidine, 82.8, 57.4, and 42.2 kcal/mol, respectively. It is also interesting to mention that linear correlations between calculated MIA values and the atomic numbers (Z) of the above metal ions were... 

A circuit model based on the transmission line theory is proposed to analyze the recently introduced metal-insulator-metal (MIM) complementary split-ring resonators (CSRRs). It is shown that integer and noninteger modes of CSRRs can be characterized by transmission line models with short- and open-circuited terminals. The proposed circuit model is then extended to incorporate side-coupling effects between the CSRRs and straight MIM waveguides. Thereby, simple closed-form expressions are provided for the coupling quality factor. It is shown that waveguide resonator structures based on CSRRs at specific resonance frequency and bandwidth can be smaller than waveguide resonator structures based... 

Interaction of Carbon Nanotubes (CNTs) and nanovoids embedded in a metal matrix is studied comparatively. For this purpose, two nearby CNTs/nanovoids are modeled as two similar cylindrical inclusions/holes in an infinite matrix. The nonlocal stresses around the CNTs/nanovoids are obtained by applying the integral constitutive equation of the nonlocal elasticity to the stresses from the complex stress potential method. Also, in order to bring different nonlocality effects of dissimilar media into account, the influence function of the nonlocal elasticity is modified. Effects of the CNTs/nanovoids size and distance as well as far-field loading ratio on the stress state in the matrix are... 

In this study, a novel hybrid hydrogel based on chitosan, acrylic acid and amine-functionalized nanosilica was prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. This hydrogel nanocomposite was used for removal of Co2+, Cu2+, Pb2+ and Zn2+ ions from aqueous solution. The metal ion adsorption was measured by inductively coupled plasma mass spectrometry. The adsorption behavior showed that the presence of modified nanosilica enhanced the porosity of the hydrogel network and affected its adsorption capacity in response to different parameters such as nanosilica content, metal ion concentration, adsorbent content,... 

Friction stir processing (FSP) is a solid state route with a capacity of preparing fine grained nanocomposites from metal sheets. In this work, we employed this process to finely distribute TiO2 nanoparticles throughout an Al-Mg alloy, aiming to enhance mechanical properties. Titanium dioxide particles (30 nm) were preplaced into grooves machined in the middle of the aluminium alloy sheet and multipass FSP was afforded. This process refined the grain structure of the aluminium alloy, distributed the hard nanoparticles in the matrix and promoted solid state chemical reactions at the interfaces of the metal/ceramic particles. Detailed optical and electron microscopic studies showed that the... 

In this investigation, a spent processing catalyst from one of the oil refineries in Iran was initially characterized physically and chemically. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used to mobilize aluminum, cobalt, molybdenum and nickel from hazardous spent catalysts. Bioleaching experiments were performed in batch cultures. The growth characteristics of the bacteria (pH, Eh, cell concentration and ferrous and ferric iron concentration) were determined during bioleaching along with the concentration of metal values extracted from the catalyst. The results obtained from Inductive coupled plasma-optical emission spectrometry (ICP-OES) showed that after the... 

A novel optimized chelating hydrogel was synthesized via graft copolymerization of acrylamide and 2-hydroxyethyl methacrylate (as two-dentate chelating co-monomer) onto salep (a multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids) using N,N′-methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Reaction parameters (N,N′-methylenebisacrylamide and ammonium persulfate amounts as well as acrylamide/2-hydroxyethyl methacrylate weight ratio) affecting the water absorption of the chelating hydrogel were optimized using a systematic method to achieve a hydrogel with high swelling capacity as possible. Heavy metal ion adsorption...