Sharif Digital Repository

MIMO (Mulitple Input Multiple Output) localization has attracted much attention recently. In such schemes, using multiple antennas at transmitter and receiver sides provides spatial diversity. On the other hand, Passive Coherent Location (PCL) by using the illuminators of opportunity (such as FM, GSM, DVB transmitters) has shown a number of advantages. In this paper, we explore the possibility of achieving diversity gain by using multiple non-cooperative transmitters. In earlier works on MIMO localization, cooperative transmitters were assumed, so that orthogonality between transmitted waveforms could be granted. However, such orthogonality condition is not assumed in the case of PCL... 

In this paper, the problem of coarse timing synchronization in orthogonal frequency-division multiplexing (OFDM) systems is investigated, and two new timing metrics with better performance are presented. The new metrics take advantage of two novel differential normalization functions that are based on the fourth-order statistics and are designed depending on the value of carrier frequency offset (CFO). The proposed timing metrics are theoretically evaluated using two different class separability criteria. It is shown that the new schemes considerably increase the difference between the correct and wrong timing points in comparison with previous methods. The computational complexity of the... 

In this paper, we evaluate the saturation throughput for an IEEE 802.11 based wireless network considering capture effect at the receiver, while nodes transmit with random powers. In this respect, we consider a scenario consisting of a specific number of wireless nodes. Then, we derive the transmission as well as collision probabilities with respect to the perfect capture effect. In order to maximize the saturation throughput we set up an optimization problem and obtain how to compute optimum values for the probabilities corresponding to different power levels. By providing the numerical results, we deduce that power randomization may lead to a significant improvement in saturation... 

In this paper, we propose a new packet prioritization scheme in order to exploit the full-duplex (FD) capability of the access point (AP) more efficiently, in an asymmetric IEEE 802.11-based WLAN, i.e., only the AP has the in-band FD communications capability. In this respect, we consider a modified version of IEEE 802.11 MAC protocol such that at any transmission opportunity in which AP has the role of the transmitter or the receiver, it does the best to select a partner packet to be simultaneously received or transmitted, respectively. The key feature of our proposed partner packet selection scheme is to reduce the idle time intervals that in an FD transmission opportunity, due to... 

Knowing the capabilities of game theory in analyzing environment consisting of many decisionmakers or agents, it has been the goal of many researchers to apply Game Theory analyses in computer and telecommunication networks. One of the main subjects in the networks based on the viewpoint of Game Theory is routing problems in special networks. In this paper, routing in Wireless Mesh Networks, which are growing and developing rapidly, is studied as an example for routing in computer and telecommunication networks and a new model for such networks is proposed based on Non-cooperative Game Theory. It is proposed to solve this model by a heuristic method essentially based on simulated annealing... 

Wireless body area network (WBAN) is composed of miniaturised sensors that operate in the vicinity of the human body for recording the vital physiological signals and wirelessly transmitting them to a central hub for further processing. In this study, a statistical approach is applied to an experimental channel data set to extract the models for the squared channel gain that best describe the characteristics of the transmission medium between the sensors and the central hub. The derived models are then utilised to investigate the error rate performance of WBAN sensors. On the basis thereof, an optimisation problem is formed for which the cost function is the symbol error rate (SER) metric.... 

In this paper we introduce a novel cross layer design between MAC and physical layers. Our novel design is based on controlling the adaptive modulation and coding (AMC) transmission mode at the physical layer according to the queue length of finite buffer at the data link layer and each transmission mode of AMC. The aim is optimizing system performance over a wireless link, preserving the important Quality of Service (QoS) parameter, packet average delay time. Analytical expressions such as packet drop probability, channel packet error rate, packet loss rate and packet average delay time are derived both analytically and through simulations according to the system and channel parameters.... 

Reliability assessment is of primary importance in designing and planning distribution systems that operate in an economical manner with minimal interruption of customer loads. Distributed generation (DG) is expected to play an increasing role in emerging power systems because they use different type of resources and technologies to serve energy to power systems. DG is expected to improve the system reliability as its backup generation. Since DG units are subject to failures as all other generation units, the random behavior of these units must be taken into account in the analysis. Existence of DG units in a distribution system will effect on restoration time of load points. In this paper,... 

Inspired by the requirement of proper link simulation methods in performance analysis of communication systems, we present in this paper a recipe for channel implementation in simulation environments. Our focus here is the indoor applications of wireless local-area networks (WLANs). Specifically, we describe a procedure that beginning with statistical description of the channel impulse response leads to an efficient multi-input multi-output (MIMO) channel simulating method for arbitrary antenna configurations at both ends. A sample set of distributions for model parameters are also provided at the 5-GHz band, which is the operating frequency band of IEEE 802.11a, HIPERLAN/2, and the emerging... 

The smart antenna technique as a method of improving the physical layer performance of OFDM WLANs is studied. For this purpose, a comparison of the smart antenna architectures for IEEE802.11a WLAN system using pre-FFT and post-FFT array processing with different parameters is represented. Simulations are performed on a new Simulink model for IEEE802.11a system using a spatio-temporal channel modeling which is based on the measured wideband channels in the 5GHz band. Raw bit-error-rate performance for QPSK/16QAM modulations at LOS and NLOS channel scenarios are evaluated and compared. © 2005 IEEE  

The IEEE 802.11 contention-based distributed coordination function has been used in ad hoc networks, and so far, a comprehensive mathematical analysis of such multihop systems has not been reported in the literature due to complicating factors such as hidden terminals and the unreachability problem. In this paper, we propose a new analytical model based on the parallel space-time Markov chain for IEEE 802.11 medium access control (MAC) in multihop ad hoc networks. The proposed scheme is able to model the hidden-terminal and unreachability phenomena. Extensive evaluation is conducted to demonstrate the accuracy of the proposed framework. © 2009 IEEE  

Plug-in hybrid electric vehicle (PHEV) technology provides one of the most promising solutions to tackle the threatening challenges such as air pollution in urban areas. Dramatic increases in the number of PHEVs could have major impacts on power system operations because of their high electricity demand. From the distribution system operator facet, distribution system congestion during PHEVs charging is an economic and security concern. It is, therefore, necessary to investigate the effects of widespread using of PHEVs on the performance of distribution networks. In this paper, PHEV characteristics are exactly studied and a comprehensive model for investigation of PHEV impacts is achieved.... 

Recently, it has been shown that applying MIMO technology, i.e. using multiple antennas at the transmit side and multiple antennas at the receive side, improves the performance of object detection and localization. In such scenarios, the spatial diversity specifically helps overcome the fading of the cross section of the object, leading to reduced probability of missed detection. Such a phenomenon is, in fact, the dual of probability of bit error reduction in communication systems due to diversity gain. Despite the importance of such performance enhancement, this subject has not been sufficiently investigated in the PCL (Passive Coherent Location) schemes, where the transmitters (or... 

A probabilistic method is developed here to model the beacon period length (BPL) defined in the ECMA-368 and ECMA-387 standards for the distributed reservation protocol. The model computes the probability mass function (PMF) of the BPL in a superframe which will be used in modeling of throughput, delay, fairness, power and other major distributed medium access control layer parameters of the emerging ultra wideband and 60- GHz millimeter wave wireless personal area networks. The model relates the PMF of the BPL to the network density, antenna beamwidth, and the transmission range of the devices assuming that the devices are distributed in an outdoor environment based on Two-dimensional... 

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

Islanding detection methods are divided into three main groups as remote, active and passive. Although passive schemes have larger Non Detection Zones (NDZ) relative to other schemes, they are more used in utilities due to their low costs and less PQ problems than other schemes. Passive Schemes are based on the measurements of passive system parameters. These parameters are measured at the point of common coupling (PCC). A new approach in passive techniques is the use of data-mining to classify the system parameters. In this paper, massive indices are collected by simulation of a practical distribution system in PSCAD/EMTP environment. These indices include voltage, frequency, current,... 

Distributed generation (DG) corresponds to the application of small generating units which are the set up in distribution systems or near load centers. Utilization of DG influences various operational indices of the distribution feeders such as feeder loading, electrical losses and voltage profile. In addition, use of DG in its appropriate size is an essential tool to attain the DG maximum potential advantages. In this paper, an optimization method is proposed to determine the optimal size of DG in the distribution system. This method considers the system technical factors such as losses, voltage profile and loading of the primary distribution system feeders. The optimization process is...