Sharif Digital Repository

Nanocrystalline TiO2-AgO thin films and powders were prepared by an aqueous particulate sol-gel route at the low temperature of 573 K (300 °C). Titanium tetraisopropoxide and silver nitrate were used as precursors, hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the phase composition of the mixed oxide depends upon the annealing temperature, being a mixture of TiO2 and AgO in the range 573 K to 773 K (300 °C to 500 °C) and a mixture of TiO2, AgO, Ag2O at 973 K (700 °C). Furthermore, one of the smallest crystallite sizes was obtained for TiO... 

High silicon fly ash (HSFA) utilized as a source of silicon in synthesizing of Na-A, -X and -Y zeolites through alkali fusion followed by hydrothermal treatment at 100 °C for 12 h. Various types of zeolites with different degrees of purity were prepared by changing Si/Al ratio of the reaction mixture from 1.6 to 3.0. In addition, exact boundaries of this ratio for synthesis of each zeolite type were determined. Furthermore, the effect of NaOH amount utilized in alkaline fusion step on crystalinity of samples investigated. The synthesized zeolites were characterized using various techniques including; XRD, TGA, FTIR, SEM and BET. The ion-exchange behaviors of zeolitic samples tested with... 

This study aims to design photo-triggered micelles by using a natural base polymer. Chitosan was functionalized with thiourea, and in the next step, it was modified by grafting poly(L-lactide), poly(N-isopropylacrylamide), and poly(acrylamide) in determined ratio to form thermo-sensitive micelles. The sulfur content of chitosan@thiourea was measured about 2%. Grafting of polymers on chitosan was characterized by FT-IR and NMR techniques. The critical micellar concentration was measured by using photo luminescence spectroscopy. The size and surface morphology experiments revealed that average size of micelles is about 14 nm, and the length and width of GNRs are about 65 and 19 nm,... 

In this study, the effects of unmodified calcium zinc phosphate (UCZP) and modified calcium zinc phosphate (MCZP) nanopigments (NPs) on the rheological, mechanical, and corrosion protection performance (CPP) of the epoxy (EP) coatings were investigated. Transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to study morphology and overall chemical structure of synthesized calcium zinc phosphate (CZP) NPs, respectively. The grafting of methyltriethoxysilane (MTES) molecules on the surface of CZP was assessed using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and... 

This research reports the preparation and examination of Cadmium Telluride (CdTe) Quantum Dots and doping CdTe QDs with Europium (Eu), Gadolinium (Gd), and Manganese (Mn) prepared in aqueous solution using TGA as a capping agent. Magnetic QDs (MQDs) are important agents for fluorescence (FL) /magnetic resonance (MR) dual-modal imaging due to their excellent optical and magnetic properties. Herein, the chemical bonds, structural, fluorescence, and magnetized properties of CdTe QDs and effect of Mn, Eu, and Gd ions doping on their properties were examined by X-ray powder diffraction (XRD), high-resolution transmission electron microscopy (HRTM), Energy-dispersive X-ray spectroscopy (EDX),... 

Magnetic nanocomposite hydrogels containing different amounts of graphene oxide were synthesized and characterized by FTIR, XRD, TGA, SEM, TEM, VSM and UV-vis spectroscopy. The prepared hydrogels were used as adsorbents for removal of a cationic dye, crystal violet, from water. The kinetics and isotherm of adsorption and the effect of different experimental conditions such as graphene oxide content, pH of the solution, contact time, adsorbent dosage and initial dye concentration on adsorption capacity were then investigated. Parameters related to kinetics and isotherm models were calculated and discussed. It was found that adsorption is well-described by pseudo-second-order kinetics and... 

The low temperature perovskite-type calcium titanate (CaTiO3) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol-gel route. The prepared sol had a narrow particle size distribution about 17 nm. X-ray diffraction and Fourier transform infrared spectroscopy revealed that, the synthesized powders had highly pure and crystallized CaTiO3 structure with preferable orientation growth along (1 2 1) direction at 400-800 °C. The activation energy of crystal growth was calculated 5.73 kJ/mol. Furthermore, transmission electron microscope images showed that the average crystallite size of the powders annealed at 400 °C was around 3.5... 

Metal-organic frameworks (MOFs) biocompatible systems can host enzymes/bacteria/viruses. Herein we synthesized a series of fatty acid amide hydrolase (FAAH)-decorated UiO-66-NH2 based on Citrus tangerine leaf extract for drug delivery and biosensor applications. Five chemically manipulated FAAH-like benzamides were localized on the UiO-66-NH2 surface with physical interactions. Comprehensive cellular and molecular analyses were conducted on HEK-293, HeLa, HepG2, PC12, MCF-7, and HT-29 cell lines (cytotoxicity assessment after 24 and 48 h). MTT results proved above 95 and 50% relative cell viability in the absence and presence of the drug, respectively. A complete targeted drug-releasing... 

The chemical synthesis and in vitro drug delivery response of folate-modified, polyethylene glycol-functionalized gold nanoparticles were studied. Lysine-capped gold nanoparticles were first prepared. Subsequently, the widely used anticancer agent doxorubicin (DOX) was successfully attached to the surface of folate-modified, polyethylene glycol-functionalized gold nanoparticles. Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) were used to confirm the functionalization and conjugation steps in the chemical synthesis. The DOX-loading efficiency determined by UV-vis spectrometer was 80%. Drug release experiments displayed a controlled-release behavior... 

This study investigates the synthesis of CuCo2O4, BiVO4, and CuCo2O4/BiVO4 nanocomposite by the solvothermal method. The Physico-chemical properties of the samples were verified through Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Transmission Electron microscope (TEM), energy-dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET). Evaluation of catalytic efficiency of the synthesized samples were done in promoting the 4-Nitrophenol reduction to 4-Aminophenol in the existence of high amount of sodium borohydride (NaBH4) as a reducing agent, and the progress of the catalytic reaction was monitored... 

The potential of electrospun cellulose acetate/chitosan/single walled carbon nanotubes/ferrite/titanium dioxide (CA/chitosan/SWCNT/Fe3O4/TiO2) nanofibers was investigated for the removal of Cr(VI), As(V), Methylene blue and Congo red from aqueous solutions via the adsorption and photocatalytic reduction processes. The properties of synthesized SWCNT/Fe3O4/TiO2 and fibers were characterized using TEM, SEM, FTIR, XRD, TGA and BET analysis. In adsorption process, the influence of adsorbent type including SWCNT to Fe3O4 ratio, TiO2 to SWCNT/Fe3O4 ratio and SWCNT/Fe3O4/TiO2 concentration as well as the adsorption parameters including pH, contact time, and initial concentration of adsorbates on... 

A series of water-soluble ABA triblock copolymers consisting of a polyethylene glycol central block joined to two blocks of six different homopolymers have been synthesized via simple solvent-free and ecofriendly routes and characterized by FTIR and 1HNMR spectroscopy. Dispersing and slump-retaining abilities of the copolymers in cement slurries were evaluated by mini-slump spread method. Rheological measurements of samples with the best performance were carried out using a rate-controlled coaxial cylinder viscometer. The test results indicate that the dispersing power of the copolymers in cement pastes is strongly affected by the structure and degree of polymerization of the monomers  

Novel self-supported Mgy(CuxNi0.6-xMn0.4)1-yFe2O4 with (y = 0, 0.05, 0.1, 0.15, and x = 0, 0.15, 0.3, 0.45, 0.6) oxygen carriers (OCs) are synthesized through the co-precipitation method. The synthesized OCs’ properties are characterized by X-ray powder diffraction (XRD), Raman spectra, transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and Thermogravimetric Analysis (TGA). The synthesized OCs are assessed in Chemical Looping Steam Methane Reforming (CL-SMR) process subject to different mesh sizes, reaction temperatures, Steam/Carbon... 

This article describes the synthesis and swelling behavior of a superabsorbing hydrogel based on sodium alginate (NaAlg) and polyacrylonitrile (PAN). The physical mixture of NaAlg and PAN was hydrolyzed with a solution of NaOH to yield an alginate-poly(sodium acrylate-co-acrylamide) [Alg-poly(NaAA-co-AAm)] superabsorbent hydrogel. A proposed mechanism for hydrogel formation was suggested, and the structure of the product was established with Fourier transform infrared spectroscopy. The effects of reaction variables were systematically optimized to achieve a hydrogel with a swelling capacity as high as possible. Under the optimized conditions concluded, the maximum capacity of swelling in... 

The objective of this work is to develop a new Preformed Particle Gel (PPG) suspension to enhance oil production and monitor water production in a porous medium on micromodel scale. To achieve the above goal, the following synthetic method was used. At the outset, the PPG samples were synthesized with polyethylene amine (PEI) as a crosslinker, 2,2′-Azobis (2-methylpropionamidine) dihydrochloride (AAPH) as initiator and acrylamide (AM) and 2-Acrylamido-2-methylpropanesulfonic acid (AMPS) monomers to improve the strength properties of PPGs by the radical polymerization method. Also, to characterize the micro and macro structural the samples, the scanning electron microscopy (SEM),... 

The aim of this study was to investigate the thermal behavior of Mg-doped calcium phosphate compounds. Nanocrystalline HA and β-TCP mixtures containing different magnesium contents were synthesized via an alkoxide sol gel method. The ratio of (Ca+Mg)P was kept constant at 1.67, and the Mg content ranged between 0 and 3 mol%. The influence of magnesium on the phase composition, chemical structure, thermal behavior and morphological characteristics of nanopowders was analyzed using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Simultaneous Thermogravimetry and Differential Thermal Analysis (STA/DTA), Scanning Electron Microscopy (SEM) and Transmission Electron... 

Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with Polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslink-ing and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

In this work, a novel method to synthesis of an acrylic superabsorbent hydrogel was reported. In the two stage hydrogel synthesis, first copolymerization reaction of acrylonitrile (AN) and acrylamide (AM) monomers using ammonium persulfate (APS) as a free radical initiator was performed. In the second stage, the resulted copolymer was hydrolyzed to produce carboxamide and carboxylate groups followed by in situ crosslinking of the polyacrylonitrile chains. The results from FTIR spectroscopy and the dark red-yellow color change show that the copolymerization, alkaline hydrolysis and crosslinking reactions have been do take place. Scanning electron microscopy (SEM) verifies that the synthesized... 

A nanocomposite of Ce-doped TiO2-reduced graphene oxide (CedT/RGO) was synthesized to evaluate the synergistic effects of constituents on electrical and photoelectric properties. The nanoparticles of titania and CedT were synthesized via the sol-gel method. Then, RGO was prepared using a new version derived from the Hammer's method and hydrothermal methods. Finally, CedT/RGO nanocomposite was synthesized applying hydrothermal method. The nanoparticles and nanocomposite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray spectroscopy and elemental mapping. Then, diffuse reflectance and... 

The self-supported CuxNi0.6-xMn0.4Fe2O4 oxygen carrier (x = 0.1–0.5) is synthesized to be applied in the chemical looping steam methane reforming (CL-SMR) process through the synthesized co-precipitation method. The response surface methodology (RSM) based on the Box–Behnken model is adopted to evaluate the effects of independent variables on the functionality of responses as well as predicting the best response volume. In this method, the variables consisting of reaction temperature (550–700°C), oxygen carrier (OC) loading percentage (0.1–0.5), steam-to-CH4 ratio (S/C), (1.5–3.5), and redox cycles’ count (10–24) and the responses consisting of hydrogen (H2) production yield, CH4 conversion...