Sharif Digital Repository

Sample preparation for non-target analysis is challenging due to the difficulty in the extraction of polar and non-polar analytes simultaneously. Most commercial solid sorbents lack the proper comprehensiveness for extraction of analytes with different physiochemical properties. A possible key is the combination of hydrophobic polymer and hydrophilic surface functional groups in solid based extraction methods in order to generate the susceptibility for retaining both polar and non-polar analytes. To pursue this goal, in this study, four polar groups including [sbnd]NH 2 , [sbnd]NO 2 , [sbnd]COOH, and [sbnd]COCH 3 were chemically bound to Amberlite XAD-4 substrate in order to prepare a... 

Bioactive glass has been used clinically in bone repair applications for bone grafting because of its prominent physiochemical and osteogenic properties. Various attempts have been made to enhance bioactive glass efficiency in combination with other biomaterials such as antibiotics and growth factors. In present study, we developed a modification of bioactive glass nanoparticles that insured long term antibacterial effect. Bioactive glass nanoparticles (BGNs) were functionalized with (3-Aminopropyl) triethoxysilane (APTS), then vancomycin (VAN) was immobilized onto BGNs-APTS via EDC/NHS cross-linking process. Another study group namely BGNs-VAN was synthesized as a control group without any... 

Methicillin resistance Staphylococcus aureus bacteria (MRSA) are serious hazards of bone implants. The present study was aimed to use the potential synergistic effects of Melittin and tetracycline to prevent MRSA associated bone implant infection. Chitosan/bioactive glass nanoparticles/tetracycline composite coatings were deposited on hydrothermally etched titanium substrate. Melittin was then coated on composite coatings by drop casting method. The surfaces were analyzed by FTIR, XRD, and SEM instruments. Tetracycline in coatings revealed multifunctional behaviors include bone regeneration and antibacterial activity. Releasing ALP enzyme from MC3T3 cells increased by tetracycline, so it is... 

The delivery of growth factors is often challenging due to their short half-life, low stability, and rapid deactivation. In native tissues, the sulfated residual of glycosaminoglycan (GAG) polymer chains of proteoglycans immobilizes growth factors through the proteoglycans'/proteins' complexation with nanoscale organization. These biological assemblies can influence growth factor-cell surface receptor interactions, cell differentiation, cell-cell signaling, and mechanical properties of the tissues. Here, we introduce a facile procedure to prepare novel biomimetic proteoglycan nanocarriers, based on naturally derived polymers, for the immobilization and controlled release of growth factors.... 

In the present study the effect of nanodiamond (ND) on the adsorption capacity of Drug has been investigated. Thermal oxidation nanodiamond (OND) was used as adsorbents for Methotrexate adsorption. The surface properties of NDs were studied by Fourier transform infrared spectroscopy and zeta potential. It was determined that thermal oxidation changed the surface properties of ND, including increase the amount of carboxylic acid groups and decreasing the zeta potential of ND by increasing the thermal oxidation time. The adsorption experiments showed that untreated ND (UND) has large adsorption capacity and fast adsorption kinetic for methotrexate (MTX). These results suggest that the... 

The potential of electrospun cellulose acetate/chitosan/single walled carbon nanotubes/ferrite/titanium dioxide (CA/chitosan/SWCNT/Fe3O4/TiO2) nanofibers was investigated for the removal of Cr(VI), As(V), Methylene blue and Congo red from aqueous solutions via the adsorption and photocatalytic reduction processes. The properties of synthesized SWCNT/Fe3O4/TiO2 and fibers were characterized using TEM, SEM, FTIR, XRD, TGA and BET analysis. In adsorption process, the influence of adsorbent type including SWCNT to Fe3O4 ratio, TiO2 to SWCNT/Fe3O4 ratio and SWCNT/Fe3O4/TiO2 concentration as well as the adsorption parameters including pH, contact time, and initial concentration of adsorbates on... 

Titanium nitride-carbon nanocomposites are synthesized by the reaction of TiCl4 and NaN3 in supercritical benzene medium that also serves as a carbon source. The as-prepared precursors (SI, SII) are subjected to several heat treatments (SIII-SV). The synthesized nanoparticles are characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The samples are tested as electrocatalyst for oxygen reduction reaction in an alkaline electrolyte. It is shown that the electrocatalytic properties of the synthesized nanoparticles are... 

An efficient and selective drug delivery vehicle for cancer cells can remarkably improve therapeutic approaches. In this study, we focused on the synthesis and characterization of magnetic Ni1−x Cox Fe2 O4 nanoparticles (NPs) coated with two layers of methionine and polyethylene glycol to increase the loading capacity and lower toxicity to serve as an efficient drug car-rier. Ni1−x Cox Fe2 O4 @Methionine@PEG NPs were synthesized by a reflux method then charac-terized by FTIR, XRD, FESEM, TEM, and VSM. Naproxen was used as a model drug and its loading and release in the vehicles were evaluated. The results for loading efficiency showed 1 mg of Ni1−x Cox Fe2 O4 @Methionine@PEG NPs could load... 

The most important disadvantage of swinging interferometers is that the optical path difference created in them is a nonlinear function of the rotation angle. In this paper, two new swinging interferometers are presented which have good linearity and provide a larger path difference in response to the rotation angle compared to other interferometers. This makes them suitable for applications such as high-resolution spectroscopy, and precision micro and nanopositioning. In one of these two interferometers, the optical path difference is created by rotation of a system composed of four mirrors, and in the other one it is created by rotation of a system consisting of two mirrors. They are not... 

In this paper, a bottom-up hydrothermal route is reported for the synthesis of oxygen and nitrogen co-decorated carbon quantum dots (CQDs) using ammonium hydrogen citrate (AHC) as a single precursor. DLS data approved the formation of 4.0 nm (average size) CQDs. XRD pattern shows the interlayer spacing (002) of 3.5 Å for CQDs, which is exactly the same as that of crystalline graphite. XPS and FTIR spectra verified the formation of oxygen and nitrogen functional groups on the CQDs surface. Co-decorated carboxyl, hydroxyl and amine groups on the CQDs surfaces make them as promising polyelectrolyte for gene delivery. Toxicity assay showed a survival rate of 70% under different incubation times... 

The aim of this study was to investigate the co-microencapsulation of Lactobacillus plantarum and DHA-rich oil in a novel gastrointestinal-resistant biocomposite composed of alginate, pectin and gelatin. The optimal biocomposite consisted of 1.06% alginate, 0.55% pectin and 0.39% gelatin showed 88.66% survivability of the microencapsulated cells compared to the free cells (50.36%). In addition, co-microencapsule containing probiotic and DHA fatty acid was synthesized and physicochemically analyzed using SEM, FTIR, TGA, XRD. The results from SEM clearly confirmed that cells were completely entrapped in the matrix and DHA increased smoothness and compactness of the surface of the particles.... 

Hyperbranched polyethyleneimine functionalized silica (PEI-SiO2) nanoparticles with considerable hydrophilicity were synthesized and incorporated into a polysulfone (PSF)/dimethylacetamide (DMA)/polyvinylpyrrolidone (PVP) membrane casting solution in five different ratios to fabricate PEI-SiO2/PSF nanocomposite membranes using nonsolvent-induced phase separation. The hydrophilic PEI-SiO2 nanoparticles were characterized by TEM, FTIR, TGA, and XPS analyses. Morphology, water contact angles, mean pore sizes, overall porosity, tensile strengths, water flux, antifouling and the dye separation performances of the PEI-SiO2/PSF membranes were also studied. The PEI-SiO2 nanoparticles were uniformly... 

We introduce highly antifouling Polymer-Nanoparticle-Nanoparticle/Polymer (PNNP) hybrid membranes as multi-functional materials for versatile purification of wastewater. Nitrogen-rich polyethylenimine (PEI)-functionalized halloysite nanotube (HNT-SiO2-PEI) nanoparticles were developed and embedded in polyvinyl chloride (PVC) membranes for protein and dye filtration. Bulk and surface characteristics of the resulting HNT-SiO2-PEI nanocomposites were determined using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Moreover, microstructure and... 

Azo dyes are common dye groups widely used in different industries. Industrial effluents which contain these dyes pervade water resources and have various known and unknown physiological effects on living organisms. In this study, methyl red (MR) was proposed as a model azo dye to examine the capability of Saccharomyces cerevisiae ATCC 9763 for cleavage of the azo bond leading to decolourization. The spectrophotometry method showed that complete decolourization occurred statically during ≃12 h and this time reduced to several minutes less than 10 min where cell mass increased. Thin layer chromatography (TLC), mass spectroscopy and Fourier transform infrared (FTIR) confirmed degradation of... 

We substitute indium present in the CuInS2 ternary compound by iron and zinc using a facile one-pot synthesis method. The quaternary compound of CuIn1-xMxS2 (M = Fe and Zn) was synthesized by dissolving CuCl, InCl3, FeCl3, Zn(ac)2 and SC(NH2)2 as precursors in 1-octadecene, oleylamine and oleic acid as non-coordinating, coordinating and capping agent solvents, respectively. Oleic acid, oleylamine and thiourea were used respectively as a hard Lewis base, borderline Lewis base (in comparison with oleic acid) and soft Lewis base to form appropriate complexes. The complex formation, structure, and... 

Single phase Ca-substituted W-type hexaferrites Sr1-xCaxZn2Fe16O27(x = 0.00(0.25)1.00) have successfully been synthesized by using sol–gel self-combustion at 1300°C. These hexaferrites are investigated by x-ray difrractometry (XRD), scanning electron microscopy, energy dispersive x-ray spectroscopy, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and vector network analysis. XRD analysis confirms the formation of a single W-type hexaferrites phase. The DC electrical resistivity increases with incrementing Ca contents. The morphology of all the hexaferrites shows hexagonal platelet-like structure. The prepared ferrites depict soft magnetic nature with high saturation... 

Palladium nanocatalysts supported on reduced graphene oxide (rGO), multi walled carbon nanotubes (MWCNT), and rGO/CNT composite were synthesized by a wet impregnation method using PdCl2 as a precursor. Palladium loading was 0.3 wt %, and the catalysts were reduced at 300°C. The catalysts were characterized by inductively coupled plasma, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, temperatue-programmed reduction, temperatue-programmed desorption, and Raman spectroscopy. The performance of the catalysts was investigated for hydro-purification of crude terephthalic acid (CTA) containing... 

The pyrolysis of low-volatile Tabas anthracite coal was investigated by thermogravimetric technique (TGA) in the temperature range from ambient to 1100 °C under non-isothermal heating conditions (1.5, 3, and 7 °C/min heating rates). Higher heating rates showed a small retarding effect on devolatilization toward higher temperatures. Iso-conversional method was used for the kinetic study of non-isothermal Thermogravimetric data. Activation energy calculated for coal conversion of 20–80% was about 319 kJ/mol which may be a result of stable ordered structure of this type of coal. Analysis of evolved gases by Fourier transform infrared spectrometry (FTIR) in 7 °C/min heating rate was conducted... 

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis,... 

The control of thin film nanocomposite (TFN) membranes cross-linking degree is an important factor to design new membranes and optimizing permeation characteristics. The Fe3O4 nanoparticle's based TFN membranes due to potentially added magnetic responsive properties to the membrane has a great importance in developing membrane architectures. Fe3O4/polyamide (PA) TFN membranes filled with nanoparticles in different sizes and concentrations have been synthesized. Cross-linking degree of PA layer characterized with Fourier transform spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods to evaluate size dependency of the cross-linking degree of PA layer network. Obvious...