Sharif Digital Repository

Bitumen ageing is one of the principal factors causing the deterioration of asphalt pavements. Ageing is a complex process that is affected by different parameters.With the rapid growth of modified binders in road paving applications over the past twodecades, it is important to study the ageing properties of these binders. A number of laboratory methods are used tosimulatethe bitumenageing at various stages of the production and service of hot mix asphalt.Recent studies have shown that Superpave testing protocol does not fully address the ageing of modified binders. To study the ageing properties of modified binders, three different types of binder modifiers, plastomer, elastomer, and ground... 

The Al-Mg-Si alloys are an important group of industrial materials used extensively in the automotive and aerospace industry, due to their high strength to weight ratio, good corrosion resistance and the recycle ability. In order to achieve a combination of optimized microstructure and properties during the production processes, the study of deformation behavior and heat treatment of these alloys is necessary. Therefore, the prediction of microstructural evolution and mechanical properties as a function of alloy chemical composition and thermomechanical treatment is important for these alloys, from both the scientific and industrial aspects. In the present research, the flow behavior of this... 

The austenitic heat resistant stainless steels have been widely used in petrochemical industry as furnace tubes which are exposed to extremely high temperatures. In this study, the quench aging process of a HP modified heat resistant stainless steel is assessed and the kinetics of aging is evaluated by the JMAK model. The microstructure of steel in as cast and aged conditions was characterized by optical microscope and scanning electron microscope equipped with EDS. The effects of aging time and temperature on the microstructure, tensile propertices, shear strength, hardness, and ductility of the aged steel were determinded. The results of tensile and shear punch tests show a linear... 

Age-related macular degeneration (AMD) is the most common cause of vision loss in those aged over 50. There are two main types of AMD, Wet and Dry form. Wet AMD is more severe though more treatable. There are three conventional treatments for AMD including laser therapy, surgery and intravitreal injection of anti-VEGF into the eye. Delivery of drugs to the posterior segment of the eye is still challenging and several implants and devices are currently under investigation for their ability to stimulate the retina, producing visual percepts. The application of intravitreal bevacizumab (Avastin) has expanded tremendously from the time of its introduction into ophthalmic care since 3 years ago.... 

One of the main problems in the airline industry is that many aircrafts of today's fleet are approaching their calendaring life, and it is impossible to buy new planes and supply previous ones for most of the companies. Therefore, in order to extend the life of these aged planes, some studies have been performed. The purpose of these studies is to discover the causes of aging and removing them. Repairing, replacement and reinforcing some elements of the structure are important parts of this procedure. This process is called aging. One of the requirements of aging technology is the examination of the structural response to the applied external loads and knowledge of the structural design.... 

Lifetime extension would be a necessary preventive action to halt micro cracks expansion on the airplane external surface. To decide about whether to perform this operation, one should examine technological maturity, costs and technical parameters. Technical status in lifetime extension is one of the major drivers of this decision which should be considered in the first step of technology management process which is known as the technology attractiveness step. In this research, major technologies of rejuvenation is examined and categorized by the technology mapping. Also, key processes of rejuvenation and technological fields ranking has been determined by the procedural view tools of the... 

In This thesis the properties of a compatible rubber compound for a specific chemical environment (acidic media) with high temperature and high pressure (HTHP) is studied. After primary studies, six formulations are designed on the basis of Nitrile rubber. after tensile and hardness tests at ambient temperature and 120 °C, samples putted in aging reservoir for aging tests. After that, tensile and hardness tests were performed again. Finally, by analyzing the results, the best formulation have chosen. Test results show that the NBR / PVC compound with higher filler load, has the best chemical resistance  

Metallurgical phenomena modeling help the researchers to understand the influence and contribution of different factors on the alloys properties. One of the most interesting phenomenon is the aging process occuring in age-hardenable alloys like 2xxx aluminium series. A factor which has high impact on aging and there are not proper models for evaluating that, is the contribution of plastic deformation. This factor has contribution not only on the dynamic precipitation (during deformation) but also on the natural aging after plastic deformation. So in this research a model containing the role of plastic deformation on dynamic precipitation and the contribution of dynamic precipitation on total... 

Water-gas shift reaction (CO(g) + H2O(g) ↔ CO2(g) + H2(g)) is performed as the key step in the hydrogen and ammonia industrial plant. In this work, Fe/Cr/Cu high temperature water gas shift catalysts were synthesized by coprecipitation method, using sulfate precursors, in order to improve the catalytic performance and particular emphasis is placed on the catalytic activity affected by aging time, precipitating agent and ways of increasing the mechanical strength. Finally the prepared and industrial catalysts were compared when they were situated in the operating conditions (at 360oC and 2 bar) and were characterized by BET, XRD, TPR, TEM and crushing strength analysis. Catalysts being made...