Sharif Digital Repository

Shrinking the dimensions of transistors in recent fabrication technologies has led to an increase in the aging rate of chips, as the most important challenge in reliability of new processors. Bias Temperature Instability (BTI) and Hot Carrier Injection (HCI) are amongst the most important adverse effect of transistor shrinkage. These two effects decrease the switching speed of transistors by increasing its threshold voltage over time. Threshold voltage shift causes timing violation in combinational parts of circuit and decreases the robustness of sequential parts against soft errors. Between different units of a processor, Arithmetic and Logic Unit (ALU) is one of the most susceptible units... 

This research conducted to achieve a pragmatic approach for the demand forecasting of ICU beds which is the one of most important services are provided by hospitals and medical centers and always has been challenging associated with capacity planning in many countries. Attaining such a method, ICU patients identified and categorized according to patients age and duration of hospitalization period. Then, as a case study, demanded ICU beds in Iran's hospitals predicted for three time horizons in 2021, 2031 and 2041 by use of regression model to forecast the population of identified patient categories which was extracted from Iran's demographic data in a 30-year period. The results indicated... 

Condition monitoring of a system refers to the process of measuring and analyzing the aging indicators of critical components of a system that can be harnessed to estimate the system’s health. One of the main interests in condition monitoring is to performing the scheduled maintenance activities for the system. Monitoring the status of the system reduces maintenance costs and prevents unwanted contingencies and outages in the system.
In power electronics, the capacitors are the most critical components of the system from the point of reliability. Capacitors are the leading cause of failure in the power electronic converters so, this essay attempts to attain a solution to monitor the... 

Iran have experienced tangible demographic changes over the recent decades. Fertility rate and marriage rate have declined, but divorce rate has increased remarkably. This research intends to examine the propensity to marry and marriage age in Iran by use of Household expenditure and income survey data (2009-2012) in the framework of search and match model. In the underlying literature, some socioeconomic factors are identified as the main determinants of these changes, particularly labor market prospects and male’s earning structure are considered as the most significant factors among others.The data are pooled and for the study years are merged with cohort data from the labor market to... 

Average of females’ age in the first marriage was increasing in Iran, in the last two decade from 20.9 in 1991 To 22.7 in 2010. It is well accepted that labor market condition and the males’ wage structure are the main determinants of preference toward marriage among others. Making use of a provinces-wide panel data 1991 To 2010 and micro individualized data (Household income and expenditure survey) for all the provinces, this research aims to assess the role of males’ wage inequality in the marriage rate in provinces and the probit cross-section models of preferences toward marriage in Iran. In the frame work of search and match theory of marriage our findings reveal that wage inequality... 

In this research, wear behaviors of 6061Al and 6061Al-20 vol% SiC composite -prepared by powder metallurgy method- were investigated in the temperature range 25- 200°C. Dry sliding wear tests were conducted at a constant sliding velocity of 0.34 m/s, an applied load of 20 N and 50N, and a sliding distance of 2450m using a pin-on-disc machine test. Some of the wear tests were carried out with artificially aged specimens in order to determine the aging effects on wear rate of composite. Worn surfaces and wear debris were also examined by using SEM and EDS techniques. Also for determining the effect of age hardening treatment on wear behavior of composite, specimens were solution treated at... 

There are more than one million motorcycles in the city of Tehran that are responsible for significant amounts of various air pollutants emissions such as carbon monoxide and hydrocarbons. Oxidation catalysis, as the exhaust aftertreatment system of motorcycles, can reduce the emission of CO and hydrocarbon pollutants. The efficiency of these catalysts under typical operating conditions of vehicle exhaust gas has been studied in the literature. However, due to the specific features of motorcycles exhaust gas in Tehran, such as ultra-rich combustion, low air to fuel ratio (lambdas as low as 0.6-0.7), different exhaust gas composition and significant amount of lubricating oil consumption,... 

In the present work, nanocrystalline Al-4wt%Cu alloy reinforced with nanometric Al2O3 particles was synthesized by in-situ reactive milling of Al and CuO powder mixture and hot extrusion. The effect of nanometric Al2O3 particles on the aging behavior and mechanical properties of this alloy was investigated. During mechanical milling, copper oxide were reduced and dissolved in the aluminum lattice. consequently, Al(Cu) solid solution matrix was produced. Also, nanometric Al2O3 particles were also distributed in the matrix uniformly. The powder blend was then pressed in an Al can at 100 MPa pressure and subsequently extruded at 450 0C at the extrusion ratio of 16:1. The density of the... 

High reliability and low power consumption are two crucial requirements of embedded systems. To do this, embedded systems exploit fault-tolerant techniques to keep reliability at a guaranteed level and power management methods to reduce power consumption. However, the inherent redundancy of the fault-tolerant techniques increases the power consumption and, consequently, the system temperature, which leads to an increase in the rate of the aging phenomenon. Power management methods increase the system's lifetime by reducing the system temperature. However, some power management methods (e.g., Dynamic Voltage and Frequency Scaling) increase the fault rate. Recently, heterogeneous multicore... 

Metallurgical phenomena modeling help the researchers to understand the influence and contribution of different factors on the alloys properties. One of the most interesting phenomenon is the aging process occuring in age-hardenable alloys like 2xxx aluminium series. A factor which has high impact on aging and there are not proper models for evaluating that, is the contribution of plastic deformation. This factor has contribution not only on the dynamic precipitation (during deformation) but also on the natural aging after plastic deformation. So in this research a model containing the role of plastic deformation on dynamic precipitation and the contribution of dynamic precipitation on total... 

Extensive studies have been performed on the genetic variations involved in common neurodegenerative diseases such as Alzheimer's, macular degeneration, and Parkinson's. In most cases, no specific gene has been identified pointing to a distinct pathogenic pathway, therefore, this study mainly aims to find common genes among aforementioned diseases according to determination of a specific pathogenic protein pathway.In this study, we reached a deep understanding of the function of nervous system and the discovery of causative agents of the diseases by applying the sources of information from genome datasets in bioinformatics analysis. The utilized database comprises the classification of... 

The Al-Mg-Si alloys are an important group of industrial materials used extensively in the automotive and aerospace industry, due to their high strength to weight ratio, good corrosion resistance and the recycle ability. In order to achieve a combination of optimized microstructure and properties during the production processes, the study of deformation behavior and heat treatment of these alloys is necessary. Therefore, the prediction of microstructural evolution and mechanical properties as a function of alloy chemical composition and thermomechanical treatment is important for these alloys, from both the scientific and industrial aspects. In the present research, the flow behavior of this... 

To ensure stable and optimal operation of lithium-ion batteries (LIBs), it is necessary to use a management system for online monitoring and accurate estimation of battery State of Charge (SOC). Due to LIBs' complex dynamics and effective factors such as temperature and side reactions, battery SOC estimation has become one of the greatest challenges for experts in the field. In this research, an adaptive sliding mode observer has been designed and evaluated for a cylindrical lithium manganese oxide battery with a capacity of 1258 mAh. At first, rigorous simulation of lithium-ion battery has been performed by utilizing the P2D electrochemical as well as thermal and aging model to be the main... 

Lifetime extension would be a necessary preventive action to halt micro cracks expansion on the airplane external surface. To decide about whether to perform this operation, one should examine technological maturity, costs and technical parameters. Technical status in lifetime extension is one of the major drivers of this decision which should be considered in the first step of technology management process which is known as the technology attractiveness step. In this research, major technologies of rejuvenation is examined and categorized by the technology mapping. Also, key processes of rejuvenation and technological fields ranking has been determined by the procedural view tools of the... 

One of the main problems in the airline industry is that many aircrafts of today's fleet are approaching their calendaring life, and it is impossible to buy new planes and supply previous ones for most of the companies. Therefore, in order to extend the life of these aged planes, some studies have been performed. The purpose of these studies is to discover the causes of aging and removing them. Repairing, replacement and reinforcing some elements of the structure are important parts of this procedure. This process is called aging. One of the requirements of aging technology is the examination of the structural response to the applied external loads and knowledge of the structural design.... 

A mathematical model has been proposed to estimate the deformation pattern and the required power in cold plate rolling using the stream function method and upper bound theorem. In the first place admissible velocity distributions as well as the geometry of deformation zone were derived from the proposed stream functions. Then, the optimum velocity field was obtained by minimization of the power function computed based on the upper bound theorem. Then a steady state heat transfer equation has been solved in whole model using finite element method. In order to verify the predictions, rolling experiments on aluminum plates were conducted and also, a finite element analysis performed employing... 

One effective way to reduce air pollution created by automobiles is to tax/toll the unfavorable characteristics of the automobiles. This study is an extension of the current literature on taxing visible and measurable aspects of automobile ownership and use, namely engine size, age, fuel used, and technology level. A three sided model, comprising the operator (government), consumers, and automobile producers, has been constructed to control emission by proper taxation. Engine size tax is one-time, age-tax is yearly, and fuel use is usage-based. The model has been built and experimented based on a sample population and the results have been shown to be in the direction of the management... 

Age-related macular degeneration (AMD) is the most common cause of vision loss in those aged over 50. There are two main types of AMD, Wet and Dry form. Wet AMD is more severe though more treatable. There are three conventional treatments for AMD including laser therapy, surgery and intravitreal injection of anti-VEGF into the eye. Delivery of drugs to the posterior segment of the eye is still challenging and several implants and devices are currently under investigation for their ability to stimulate the retina, producing visual percepts. The application of intravitreal bevacizumab (Avastin) has expanded tremendously from the time of its introduction into ophthalmic care since 3 years ago.... 

Age-related macular degeneration (AMD) is the most common cause of vision loss in those aged over 50. There are two main types of AMD, Wet and Dry form. Wet AMD is more severe though more treatable. There are three conventional treatments for AMD including laser therapy, surgery and intravitreal injection of anti-VEGF into the eye. Delivery of drugs to the posterior segment of the eye is still challenging and several implants and devices are currently under investigation for their ability to stimulate the retina, producing visual percepts. The application of intravitreal bevacizumab (Avastin) has expanded tremendously from the time of its introduction into ophthalmic care since 3 years ago.... 

Water-gas shift reaction (CO(g) + H2O(g) ↔ CO2(g) + H2(g)) is performed as the key step in the hydrogen and ammonia industrial plant. In this work, Fe/Cr/Cu high temperature water gas shift catalysts were synthesized by coprecipitation method, using sulfate precursors, in order to improve the catalytic performance and particular emphasis is placed on the catalytic activity affected by aging time, precipitating agent and ways of increasing the mechanical strength. Finally the prepared and industrial catalysts were compared when they were situated in the operating conditions (at 360oC and 2 bar) and were characterized by BET, XRD, TPR, TEM and crushing strength analysis. Catalysts being made...