Sharif Digital Repository

In this study, strain ageing during and after warm rolling of a carbon steel has been investigated. At the first step, the occurrence of serrated flow was studied by means of tensile tests at different temperatures and strain rates. In the next stage, warm rolling experiments were performed under different rolling conditions and then the samples were aged at the room temperature for a period of 3 months. For both aged and non-aged samples, tensile tests were employed to evaluate their mechanical properties. The results show that static strain ageing is possible to happen in the utilized ageing period and increases the yield stress of the aged steel. However, the samples that experience both... 

Nutrient disorder and presence of disease-causing agents in soilless media negatively influence the growth of muskmelon. To combat these issues, use of environmentally-friendly sanitation techniques is crucial for increased crop productivity. The study was conducted under greenhouse and field conditions to investigate the effect of two different sanitation techniques: steaming and formalin fumigation on various media’s characteristics and their impact on muskmelon yield. Media: jantar, guar, wheat straw and rice hull and peat moss of 10% air-filled porosity and sanitized with formalin and steaming. Steaming of guar, jantar, and wheat straw increased the phosphorus (P) and potassium (K)... 

Dynamic strain ageing may occur during warm working of low carbon steels and causes significant changes in flow behaviour and microstructure of the deformed material. Therefore, for a proper designing of an industrial forming process performing under warm deformation conditions, the effect of dynamic strain aging should be taken into account. The aim of this investigation is to predict the velocity and the temperature fields within the rolling metal with regard to the dynamic strain aging. For this purpose, compression tests at various temperatures and strain rates have been conducted to evaluate dynamic strain aging in a low carbon steel. Then, by coupling the experimental results with a... 

Introduction: The COVID-19 pandemic has considerably affected human beings most of whom are healthcare workers (HCWs) combating the disease in the front line. Methods: This cross-sectional study aims to explore the effects of stress and anxiety caused by COVID-19 on the quality of sleep and life in HCWs, including physicians, nurses, and other healthcare staff. In this global study, we asked 1,210 HCWs (620 and 590 volunteers from Iran and European countries, including Germany, the Netherlands, and Italy, respectively), who age 21–70, to participate in the test. Several measures of COVID-related stress, anxiety, sleep, and life quality, including the 12-item General Health Questionnaire... 

In this paper, dynamic strain aging (DSA) behavior in a temperature range of (25-235°C) and strain rate range of (10-4-5×10-2s-1) was investigated using a supersaturated age hardenable aluminum alloy. It was found that two mechanisms consisted of pinning of solute atoms to mobile dislocations and dynamic precipitation, were responsible for DSA in the testing conditions. The effects of both mechanisms on the macroscopic flow curve were studied using experimental and improved physically based material modeling approaches. It was shown that both phenomena lead to a negative strain rate hardening in the alloy. Dynamic precipitation acting at high temperature results in considerable work... 

A new integrated physically based constitutive model was developed for an age hardenable Al- Mg-Si alloy. The kinetics of precipitation during various stages of aging was modelled. The precipitate features consisted of particle radius and volume fraction obtained from the kinetics model, which was used to compute the alloy yield strength/hardness. A published multiinternal variable workhardening model was improved to take into account the effects of solute solution and precipitates on the alloy hardening capacity after performing different cycles of aging treatment. The flow curves and hardness predicted by the model were in good agreement with the experimental results. The model is able to... 

Thermo-mechanical responses, developed microstructure, and mechanical properties in friction stir welding (FSW) of artificially aged AA2017 plates were investigated. A finite element analysis was first employed to evaluate hot deformation behavior of the alloy during welding. Also, hardness, yield strength, and microstructure of the welded alloy were examined using the results of the model and experimental testing. It was found that strain and temperature fields during welding are asymmetrically distributed and the maximum temperature locates in advancing side. Furthermore, considerable grain refinement is observed in the stir zone where recrystallized grains in the range of 3 to 8 m are... 

Transient liquid phase (TLP) diffusion bonding is a preferred joining/repairing technique for nickel based superalloy. In this research, TLP bonding process carried out according to the standard heat treatment cycles for wrought IN718 base material in order to permit the combining of these two thermal operations. The results showed that the standard solution treatments at 1000 and 1050. °C for 60. min can result in completion of isothermal solidification in IN718/Ni-Cr-Fe-Si-B/IN718 system producing an entirely intermetallic free joint centerline. Two distinct microstructural zones were formed in the bonding affected zone: isothermal solidification zone (ISZ) which consists of single phase... 

Functional connectivity in human brain can be represented as a network using electroencephalography (EEG) signals. These networks--whose nodes can vary from tens to hundreds--are characterized by neurobiologically meaningful graph theory metrics. This study investigates the degree to which various graph metrics depend upon the network size. To this end, EEGs from 32 normal subjects were recorded and functional networks of three different sizes were extracted. A state-space based method was used to calculate cross-correlation matrices between different brain regions. These correlation matrices were used to construct binary adjacency connectomes, which were assessed with regards to a number of... 

Background: Many studies have been conducted on the changes in the balance capabilities of stroke patients. However, results regarding the effects of dual-task activities on postural control in these patients have been variable. Objective: To evaluate the effects of a short-term memory task on the sway characteristics of stroke patients. Method: Center of pressure (COP) fluctuations were measured in three levels of postural difficulty (rigid surface with closed and open eyes and foamsurface with closed eyes), aswell as two levels of cognitive difficulty (easy and difficult). COP parameters included mean velocity, standard deviation of velocity in both medial-lateral (M.L) and... 

When aircrafts reach the end of their service life,fatigue cracks are found to have developed along rivet holes andother highly stressed regions of aircrafts.In order to extend the life of these aircrafts, repairs should be made to arrest these cracks.Composite doublers or repair patches provide an innovative repair technique,which can enhance the waywhich aircrafts are maintained.Bonded repair of metallic aircraft structure is used to extend the life of flawed or under-designed components at reasonable cost.Such repairs generally have one of three objectives: fatigue enhancement,crack patching or corrosion repair.Repair of cracked structure may be performed,by bonding an external patch to... 

Equal channel angular pressing (ECAP) was used before and after various aging treatments in order to strengthen a commercial 6082 Al alloy. Experiments were carried out to study the strengthening of the alloy due to pre and post-ECAP aging treatment. It was found that aging before and after ECAP processing is an effective method for strengthening of the alloy. An increase in both strength and ductility of the ECAPed specimen was achieved via appropriate post-aging treatment. This was in such a manner that for maximal strengthening, post-ECAP aging is best conducted at temperatures lower than those usually used for aging if prior work hardening is not undertaken. Pre-ECAP aging was also... 

A computational framework is presented, based on statistical shape modelling, for construction of race-specific organ models for internal radionuclide dosimetry and other nuclear-medicine applications. This approach was applied to the construction of a Japanese liver phantom, using the liver of the digital Zubal phantom as the template and 35 liver computed tomography (CT) scans of male Japanese individuals as a training set. The first step was the automated object-space registration (to align all the liver surfaces in one orientation), using a coherent-point-drift maximum-likelihood alignment algorithm, of each CT scan-derived manually contoured liver surface and the template Zubal liver... 

Maintenance costs in airlines change as time passes. As airplane ages, it needs more often and more expensive checks. Due to these growing expenses, airlines are getting more interested in cost analysis. Under financial pressure, they avoid buying new airplanes and try to maintain the old ones, but sometimes try to cut the maintenance costs by ignoring or delaying some checks. In other words, they are more disposed to spend small amount of money frequently through time, than to spend a great deal on a new airplane with low maintenance costs. Therefore, in such situations, the following questions raise that what solution is more efficient as we look dynamically to the system? For answering... 

Aging has become a critical CMOS reliability issue in nanoscales. In general, the aging effect is exhibited as an increase in the delay of the combinational parts and robustness degradation of memory structures. To monitor the aging state of the combinational parts, this paper proposes an aging sensor that is combined with the flip-flops of a chip. The function of this sensor is based on monitoring the stability violation of the critical path output, before the rising edge of the clock signal. The precision of the proposed sensor is about 2.7 × of the most accurate previously presented aging sensors. This is achieved by almost 33% less area overhead compared with state-of-the-art aging... 

This paper puts forward a new methodology for time-variant seismic risk analysis of transportation networks. Risk here denotes the probability of exceeding the sum of direct loss due to repair costs of bridges in the network and indirect loss due to the reduced capacity for traffic flow. The proposed methodology employs reliability methods and a host of probabilistic models for earthquake events, damage, repair cost, downtime, and travel time, while accounting for time-varying phenomena of aging and discounting. A comprehensive application on the transportation network of Isfahan, Iran, is presented that features 64 bridges subject to seismicity from seven sources. © 2018 Taylor & Francis... 

Cu-1·5Cr alloy was successfully produced by a new method, composed of alloying via melting in a non-protected atmosphere followed by rapid cooling in a water cooled mould. The effects of deformation magnitude during T10 treatment on microstructure, electrical conductivity and hardness of alloy were also investigated. The results showed that cold work before age hardening treatment, especially in the range of 20-40% deformation, provides optimum electrical and mechanical properties, i.e. electrical conductivity of 70-85% International Annealed Copper Standard (IACS) and hardness of 160-180 HB. In addition, the cold work promotes a useful anisotropy in electrical and mechanical properties of... 

An age-hardening model has been developed to predict the evolution of the hardness of Al-Mg-Si alloys during non-isothermal ageing before peak age. The concurrent precipitation and dissolution have been considered in the structural model. Then the structural model has been combined with strengthening model to predict the precipitation-hardening behavior of the alloy AA6061. The results indicate that the developed model can be used as a predictive tool to model the mechanical properties evolution of Al-Mg-Si alloys during non-isothermal heat treatment. © 2008 Elsevier B.V. All rights reserved  

Nickel titanium shape memory alloys (NiTi-SMAs) were successfully produced from elemental Ni/Ti powders by powder metallurgical method and then subjected to age treatment. Microstructure was examined by SEM and XRD and phase transformation temperatures were measured by dilatometric method. The phase transformation temperatures increased with both duration and temperature of the age treatment. The porous product exhibited desirable shape memory effect. © 2009 Elsevier B.V. All rights reserved