Sharif Digital Repository

Poly(lactic acid) (PLA)/poly(vinyl acetate-. co-vinyl alcohol) [P(VAc-. co-VA)] blends as new transparent film packaging materials were prepared at various blend compositions and different vinyl alcohol contents. The blends and pure PLA were irradiated by gamma rays to investigate the extent of changes in the packaging material during gamma ray sterilization process. The miscibility of the blends was dependent on the blend composition and vinyl alcohol content; gamma irradiation had little effect on the extent of miscibility. The glass transition temperature of pure PLA and PLA/P(VAc-. co-VA) miscible blends reduced after irradiation. On the other hand in PLA/P(VAc-. co-VA) immiscible... 

Propagation of a chirped laser pulse with a circular polarization through an uprising plasma density profile is studied by using 1D-3V particle-in-cell simulation. The laser penetration depth is increased in an overdense plasma compared to an unchirped pulse. The induced transparency due to the laser frequency chirp results in an enhanced heating of hot electrons as well as increased maximum longitudinal electrostatic field at the back side of the solid target, which is very essential in target normal sheath acceleration regime of proton acceleration. For an applied chirp parameter between 0.008 and 0.01, the maximum amount of the electrostatic field is improved by a factor of 2.... 

This work aims to develop a chemically modified sol–gel synthesis pathway for obtaining various barium titanate nanostructures. The method is able to prepare different BaTiO3 nanostructures such as highly stable nanoparticle embedded colloids, highly transparent amorphous nanolayers, nanocrystalline BaTiO3 powders and ultrathin BaTiO3 nanostructured films directly from a precursor solution. All the products have been prepared at a lower temperature and in a more cost-effective way in contrast to other established sol–gel methods. The results show that the optical transparency of the thin films has been significantly improved in contrast to the similar researches. The deposited thin film is... 

In this paper, we propose a circuit model for two-dimensional arrays of metallic square holes located on a homogeneous substrate, in order to propose a new scheme containing this type of metamaterials to obtain transparent electrodes with simultaneous terahertz transparency and low electrical resistance. The results of the introduced circuit model, which is a fully analytical model with explicit expressions, are in almost complete agreement with the full-wave simulations. Thanks to this analytical model, we can employ standard binomial matching transformer in order to minimize the reflected power from the structure at a desired frequency. Furthermore, taking advantage of this model, we... 

Indium tin oxide (ITO) thin films have been deposited using RF sputtering technique at different pressures, RF powers, and substrate temperatures. Variations in surface morphology, optical properties, and film resistances were measured and analyzed. It is shown that a very low value of sheet resistance (1.96 ω/sq.) can be achieved with suitable arrangement of the deposition experiments. First, at constant RF power, deposition at different pressure values is done, and the condition for achieving minimum sheet resistance (26.43 ω/sq.) is found. In the next step, different values of RF powers are tried, while keeping the pressure fixed on the previously found minimum point (1-2 Pa). Finally,... 

The effects of hydrogen addition, diluent addition, injection pressure, chamber pressure, chamber temperature and turbulence intensity on methane-air partially premixed turbulent combustion have been studied experimentally using a constant volume combustion chamber (CVCC). The fuel-air mixture was ignited by centrally located electrodes at given spark delay times of 1, 5, 40, 75, and 110 ms. Experiments were performed for a wide range of hydrogen volumetric fractions (0% to 40%), simulated diluent volumetric fractions (0% to 25% as a diluent), injection pressures (30-90 bar), chamber pressures (1-3 bar), chamber temperatures (298-432 K) and overall equivalence ratios of 0.6, 0.8, and 1.0.... 

Gold nanoparticles are widely used as high efficient photon-thermal energy converters in a broad range of applications. This paper presents a theoretical investigation on using the optothermal properties of gold nanoparticle arrays to generate nanoscale molten and rubbery regions on the surface of an amorphous polymeric film. Nanoparticles are assumed to be embedded in a transparent silica layer and illuminated with a 7.5 ns pulsed laser at 532 nm. Simulation results are presented for systems with single gold nanoparticles, dimers and chains. Both electromagnetic and thermal interaction between nanoparticles are found to be important factors in determining the result of surface processing.... 

The effects of hydrogen addition, diluent addition, injection pressure, chamber pressure, chamber temperature and turbulence intensity on methane-air partially premixed turbulent combustion have been studied experimentally using a constant volume combustion chamber (CVCC). The fuel-air mixture was ignited by centrally located electrodes at given spark delay times of 1, 5, 40, 75 and 110 milliseconds. Experiments were performed for a wide range of hydrogen volumetric fractions (0% to 40%), exhaust gas recirculation (EGR) volumetric fractions (0% to 25% as a diluent), injection pressures (30-90 bar), chamber pressures (1-3 bar), chamber temperatures (298-432 K) and overall equivalence ratios... 

In this research, response surface methodology (RSM) was applied to study the effects of Na-Montmorillonite (Na-MMT) and glycerol on some functional properties of corn starch films. Films were prepared by casting method according to central composite design (CCD). Originally image processing technique was used in order to estimate transparency of the films. It was found that Na-MMT absorbed UV light from 216 to 266. nm. No antimicrobial activities were observed against Escherichia coli and Staphylococcus aureus. Contact angle analysis revealed hydrophilicity of starch films decreased utilizing nanoparticles and increased with plasticizer content. Increase in glycerol content decreased... 

Optothermal properties of noble metal nanoparticles can be used in a wide range of applications. This paper presents the results of a theoretical study on the utilization of laser-induced heating of a gold nanoparticle (GNP) to melt a region of a transparent material with sub-wavelength spatial resolution. The considered system consists of a 10 or 15nm diameter GNP fixed inside a silica substrate. The silica surface is covered with a thick film of the transparent polymeric or crystalline material. The heating and melting processes are studied under a 7.5ns pulsed laser illumination. Calculations are conducted under three temperature limits, on the maximum temperature of the free electrons,... 

Design and operation of three different optical designs based on the light intensity modulation for investigation of the humidity effects on the air index of refraction are described. The measurement variable is the transmitted power, which depends on the refractive index of the medium in the path of a fiber-to-fiber optical design. Three different probes (probe #1, #2, and #3) are tested in which probe #1 and probe #2 can also check the presence of water or any other transparent liquid in the gap between the two axial fibers. Performances of the new systems are tested as a refractive index monitoring mean and experimental results are given. The variations of the modulated powers as... 

Formation of transparent glass-ceramic in the system MgO-SiO 2-Al 2O 3-K 2O-B 2O 3-F with and without addition of LiF and NaF has been investigated. Crystallization of glass-sample was conducted by controlled thermal heat-treatment, at determined nucleation and crystallization temperatures. In this regard, the effects of addition of LiF and NaF were investigated on the crystallization behavior and transparency of the samples. Low transmission (less than 80% at 600. nm) was observed in the basic composition (K).The addition of NaF and LiF caused more intense phase separation in the system. The results indicated that the glass-ceramic can remain transparent if fine grains with nano size are... 

Effect of NaF on crystallization kinetics, microstructure, and mechanical properties of mica glass ceramics were investigated by the differential thermal analysis (DTA), X-ray diffractometry (XRD), scanning electron microscopy (SEM), and microhardness tests. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses are changed in the range of 235-246 KJ/mol, while the crystallization activation energies of samples with addition of NaF are changed in the range of 263-367 KJ/mol. The increase of crystallization temperature is helpful for the increase of aspect ratio, and the microstructure of the glass ceramics becomes interconnected, which contributes... 

In this study operation of an optical design based on the intensity modulation for the refractive index change has been described. The reported instrument measures the transmitted output power depending up on the medium refractive index in the light path of a fiber-to-fiber design. A liquid cell is located between the fibers in the light path and power variations for different cold and hot water levels in the cell are measured. By using a reference humidity meter the calibration curve representing the relative humidity (%RH) as a function of the transmitted output power is obtained. For the hot water with the final temperature of T = 32.7°C the output power range of 255.0 -313.OnW is... 

The performance of hapticdevicesisevaluatedbasedontheconceptoftransparency, whiletheirstabilityhasprevalentlybeenevaluatedbasedonthepassivitycriterion. Duetotheconservativenessofpassivity, itappearsasanobstacletoimprovingtransparency.Inthepresentpaper, passivityissuggestedtobereplacedbythecomplementarystabilitycriterionwhichaccoun tsfortherobuststabilityoftheinteractioninthepresnceofuncertainuserhanddynamics. Inthisrespect, analgorithmisproposedwhichguaranteestransparencyofthehapticdeviceinastablemanne r.Assumingthatthedynamicsofthedeviceisknown, acertaincompensatorystructureisassigned. Thisspecialstructureguaranteestransparencyofthedevicebycompensatingforthedynami... 

In this study, the effects of TiO2 addition on the physical and photoelectrochemical properties of ZnO thin films have been investigated. The (TiO2)x-(ZnO)1-x nanocomposite thin films were dip-coated on both glass and indium tin oxide (ITO)-coated conducting glass substrates with various values of x, specifically 0, 0.05, 0.1, 0.25 and 0.5. Optical properties of the samples were studied by UV-vis spectrophotometry in the range of 300-1100 nm. The optical spectra of the nanocomposite thin films showed high transparency in the visible region. The optical bandgap energy of the (TiO2)x-(ZnO)1-x films increased slightly with increasing values of x. The crystalline structure of the nanocomposite... 

Proper modeling of the human arm dynamic, as it interacts with telemanipulation and haptic systems, is important in enhancing the transparency of these systems. In this article, we introduced an adaptive identifier to estimate the impedance characteristic of a human operator as it interacts with a single translational degree of freedom mechanism. The five parameter model, including an extra spring and damper for a better approximation of the dynamic behavior of human arm, has been used. Since the impedance characteristic of human arm differs from one individual to another, it is important to estimate these parameters for each individual and update the controller to enhance the transparency... 

Exoskeleton robots are developed for human rehabilitation and power augmentation. Human and robot interaction is an important issue involved with these robots. In this paper, the interaction force reduction is considered leading to the transparency of a lower limb exoskeleton during swing phase of walking. Achieving this goal, a robust Lyapunov based motion control method has been developed. The desired reference signals for motion control are generated using a direct force control approach. Robot accelerations are estimated by an observer to be employed in the control loop. An adaptation procedure has been proposed for the bound estimation of uncertainties. As part of assumptions, the...