Sharif Digital Repository

The need for better characterization systems (electron microscopes) and high resolution lithography systems, have made electron beams systems an interesting choice for research and development. In fact, all of the above applications require ideal electron beams (beams with minimum energy spread, maximum current density, and minimum spotsize), and electron-optic lenses (simple lenses with minimum aberration). In this research, theoretical aspects of electron emission and lens systems are reviewed. Field emission array (FEA) electron guns are introduced as electron sources with minimum energy spread, and a new simulation method is presented in order to minimize the complexity, and reduce the... 

In several electro-optic and optoelectronic devices, we require the structures with simultaneous high electrical conductivity and optical transparency so as to transmit the incident light. Transparent Conductive Electrodes (TCEs) that are both highly conductive and transparent were introduced to be an answer to the mentioned challenge. Periodic arrays of metallic holes are amongst the most important structures that are used as transparent electrodes. Using the metals with low electrical resistivity, such as Au and Ag, provides these structures with high electrical conductance. On the other hand, since these micro/nano structures support the propagation of guided electromagnetic waves, light... 

The Transparent electrode (transparent conductive layer) is an essential component of electro-optical devices, especially screens, solar cells and touch screens. Today, most semiconductor oxides such as ITO are used for this purpose, which have problems such as inflexibility, high cost, environmental degradation and ion penetration in organic displays. In this research, the design, simulation and fabrication of a transparent electrode with a network of metal nanowires with low resistance between cross fibers and high aspect ratio during the production stages of polymer mold, metal coating and characterization has been done. Using the reducing atmosphere in the sputtering chamber, the... 

Quantum interference and coherence are responsible for a novel set of physical phenomena, where Electromagnetically Induced Transparency is one of the most important of them. Each of these phenomena can make a new possibility for modifying the optical properties of a coherently prepared medium. Fast controllability of optical properties in one hand and flexibility of this control process in the other hand, are important factors that attract interests into coherent control of light .Coherent control of optical properties of the medium can be used in designing some advanced and challenging devices including All-Optical Switches. In this work , in a consistent picture, using a step by step... 

In this work a theoretical overview of Parity-Time symmetry and its application in multilevel atomic systems are presented. Because of equivalence between the Schrodinger equation and the paraxial propagation equation, complex index of refraction plays the role of complex potential. On the other side, the possibility to manipulate loss, gain and the index of refraction simultaneously, Optics is a fertile ground to investigate Parity-Time symmetry and one of this symmetry’s applications is reduction of loss in optical systems. Furthermore, In order to realize Parity time symmetry a four level atomic system under electromagnetically induced transparency condition is proposed. Optical gain... 

Common fracture treatments include open reduction and intramedullary nailing technology. However, these methods have disadvantages such as intraoperative X-ray radiation, delayed union or nonunion and postoperative rotation. Robots provide a novel solution to the aforementioned problems while having new challenges. The robotic system used in the study by providing more precise motion and exerting higher amount of forces makes the operation procedure more straightforward. In a normal operation 300-400 N of extension force would be needed which is fully provided by the surgen which leads to physical his/her (khastegi), by using the robotic system however, this force is simply provided without... 

This thesis deals with the theoretical and experimental investigation of quantum interference and coherence, and electromagnetic induced transparency (EIT) in multi-level atomic systems such as hot and cold Rb atoms, semiconductor quantum dots and wells. Optical properties of atomic media in presence of coherent laser fields and incoherent fields are studied.
Theoretical studies verify the crucial role of atomic coherence due to quantum interference in modifying optical properties of atomic media. Suitable and efficient models based on multi-level atomic systems to investigate the optical properties and, optical bistability and multistability are proposed. The most advantages of these... 

Impressive progress in hardwares and developing encryption algorithms in last two decades are caused increase in using encryption protocols in network communications. In last decade, users use privacy preserving networks like Jap and Tor to protect their privacy. These networks protect users' data from eavesdroppers by using three-layer encryption and intermediate nodes between user and target website. Recent researches show that Deep Neural Networks can predict websites viewed by users with high accuracy. In other words, privacy preserving networks suffer from information leakage. In this research, we introduced some of the most powerful methods in encrypted traffic classification and then... 

Zinc oxide is a wide band gap semiconductor material with wide applications as conductive oxides used in electro-optical devices. Thin films of doped zinc oxide (e.g. Al:ZnO, B:ZnO) are already used in thin-film solar cell technologies as electrodes. Chemical bath deposition (CBD) is a promising method for fabricating transparent and conductive ZnO layers at low temperatures (<100 °C) on nonconductive and temperature-sensitive substrates. Having a natural crystal habit, ZnO readily grows rod-like arrays when grown in an aqueous solution by CBD, posing challenges when attempting to deposit dense and conductive layers. The purpose of this study was to deposit dense and conductive zinc oxide... 

Transparent conductive electrode (TCE) is one of the indispensable constituent of optoelectronic devices, which heretofore various materials such as ITO, graphene, CNT, metal nanowire and nanofiber network have been used to produce them. It should also be assumed that the use of low-cost materials, which has cost-effective production method, is essential for the construction of transparent electrodes. Copper nanofiber network film which is obtained from electrospinning process is a promising candidate among these materials because it has superiorities, such as low sheet resistance, proper flexibility and abundance in ground resources, scalable and cost-effective fabrication method. There are... 

The poor economic performance of natural resource abundant countries has been studied for a long time and in order to alleviate this problem some different solutions are suggested by economists. One stream among these solutions are those focusing on the distribution mechanism of natural resource revenues and the ownership of these resources. In this study, it is intended to address the effect of change in the ownership of natural resources on politicians’ behavior and people welfare by using political economy approach. Also the optimal share of people from natural resources as a function of political and economic institutions is discussed. In this study, it is shown theoretically that under... 

Although using solar energies have some limitations, such as low efficiency, require a large space and high starting cost, they are one of the most attractive source of energies. The reasons that cause efficiency of the solar panels decrease are contamination of dust particles on them and formation of water droplet on solar panel surface due to humidity of the air. Also, a solar panel can absorb only 25% of incident light and the others are reflected by the cover glass. Therefore, fabrication of a self-cleaning surface that can inhibit the aggregation of dust particles and also transparent that doesn’t reflect the incident light is crucial.In this work, we aim to obtain a transparent,... 

Emergence of crypto-currency and blockchain technology revolutionize supply chain processes. In addition, customer needs for more information on products or services from origin to destination, highlights the necessity of transparency, originality and traceability in supply chains. This research is aimed to develop a blockchain based system ascertaining supply chain transparency and originality. To this aim, a joint pricing and closed-loop supply chain network design problem is selected as a good platform to implement it. Due to increasing concerns on environmental issues and maximizing job opportunities, sustainability is also considered in the proposed problem. To ascertain transparency... 

In this process transparent polycrystalline alumina ceramic was provided by submicron alumina gel casting and spark plasma sintering. The monomer system in this process including met acrylamide and methylene bis acrylamide was chosen as a monomer and cross linker. These two agents comprise 5%wt of the precursor with the ratio of 3 to 1 respectively. With the optimization of Dolapix CE64 as a dispersant and providing the suspension with 76%wt, a greenware with the density of 56.3% wt was obtained. Differential thermal analysis of green body showed that the existing monomers are removed by the time the body reaches 550°C. In order to access high real in-line transmittance, the microstructure... 

Increasing of human demanding for energy and limiting of fossil fuels and bio-logical problems, it seems necessary to access new and clean source of ener-gy. For instance, one of these sources of energy is sun. If we can impart from this infinite energy source so health and natural life can be pictured for human. Nanostructure dye sensitized solar cells in compare with other photovoltaic cells are more economical and practical as a result of lower material cost and simpler manufacturing process. In general, a typical dye sensitized solar cell is a sandwich structure based on two transparent conducting oxide (FTO) glasses. The FTO glass substrates are expensive and account for most of... 

In this study, transparent conductive thin film of Aluminum doped ZnO (ZnO:Al) have been fabricated thorough RF sputtering. The main goal of fabrication of these layers is achieving thin films with minimum resistivity and maximum optical transparency in visible range of spectrum employing as transparent electrodes and buffer layer at the entirely oxidized solar cells. To achieve the suitable structure, various parameters including pressure, power and the thickness of the deposition and annealing on morphologies of thin film has been investigated. According to these results, thin film of ZnO:Al has the transparency of 80% in the visible light range . Doping of ZnO with Aluminum caused... 

The abstract is the most important section of the thesis because many readers limit most of their reading to abstracts, saving in-depth reading for specific theses. It should give the reader a "preview" of what's to come. The abstract should emphasize new and important aspects of the study or observations. The purpose of the abstract is to allow researchers to decide whether or not to read the whole thesis. The abstract is what researchers read first to decide if the thesis is important, interesting, and it allows them to assess the relevance of a thesis to their own research, without having to read the entire thesis. Thus, it is crucial that the abstract both summarize succinctly the key... 

Optical metasurfaces are 2D structures of a repetitive arrangement of a number of nanoparticles that are artificially constructed and do not exist in nature. Important applications of optical metasurfaces are meta lenses, flexible solar cells and extremely small antennas. Fabricating surfaces with nanoparticles of proper geometry under light radiation along with elastic deformation, we can have optical metasurfaces with selective reflection or transparency in the visible spectrum. The aim of this project is modeling of an optical metasurface with elastic deformation leading to change of color and transparency. For this purpose, assuming vertical light radiation and linear polarization, we... 

Humans need the five senses to understand and interact constructively with their surrounding environment; in the world of robots and intelligent systems, this is achieved using sensors. In the modern world, tactile sensors based on triboelectric effect play a prominent role in important application areas such as health monitoring, human-computer interaction, robotics, pressure mapping, and electronic signature. Triboelectric nanogenerators (TENGs) are one type of energy harvesting systems that convert mechanical energy into electrical energy. In these sensors, due to the contact and touch with the triboelectric material, an electric charge is generated and induced into the electrode, then... 

The purpose of this study is the fabrication and characterization of ZnO nano particles and the application of ZnO in solar cells. Therefore, firstly we fabricate the high stable solution of ZnO nano particles and then characterize ZnO nano particles. In addition, we study sulfurzation and selenization of zinc oxide thin films. We use ZnO nano particles for fabrication of transparent conductive films. Transparent conductive films have many applications such as touch panels, displays and solar cells. The most applicable transparent conductive electrode is indium tin oxide , which is the most expensive layer in solar cells. But silver nanowires has some challenges such as high surface...