Sharif Digital Repository

Liquid impingement cooling in the form of jet or spray is an appropriate method to remove heat from small surfaces progressively utilized in industry. In this study, numerical simulations are conducted to investigate the effect of surface structure on heat transfer characteristics. Five different three-dimensional structured surfaces are investigated using Euler-Lagrangian approach. The effect of surface structures is discussed on the liquid film thickness, the liquid film velocity, and the heat flux with its uniformity for a given spray and temperature characteristics. The results show that the convective heat transfer strongly depends on both liquid film thickness and velocity. While the... 

Today, passenger and racing boats increasingly utilize surface-piercing propellers. This type of propeller operates in two distinct phases of water and air simultaneously. As a result, this propeller type has additional characteristics that must be investigated separately from conventional propellers. A new family of surface piercing propellers was investigated using experimental and numerical methods. The family consisted of five propeller models with varying geometric features operating at an immersion ratio of 0.7. Experiments were conducted in the Sharif University of Technology's hydrodynamic group's cavitation tunnel. Additionally, using Star-CCM + software, the numerical simulation... 

Natural ventilation has been used to increase indoor air quality, remove pollutants, and remove heat absorbed in the building structure. Some architectural features such as wind-catcher systems are used to induce airflow into buildings, and openings equipped with louvers are employed to reduce solar daylight while allowing natural ventilation. Earlier studies on ventilated louvers and wind-catchers have shown the impact of the louvers’ opening positions and slat angles. However, their combination with each other has been less studied. This paper presents CFD simulations of cross-ventilation in a generic isolated building integrated with a one-sided roof-top wind-catcher and the outlet... 

In this study, we perform numerical simulations to investigate the thermal and flow characteristics of a parabolic trough solar collector equipped with a porous receiver tube and internal longitudinal fins. The heat transfer medium is a synthetic oil-Cu-Al2O3 hybrid nanofluid. We examine the thermal characteristics of the nanofluid in response to variations in several system parameters. We find that at Reynolds numbers between 5 × 103 and 5 × 105, increasing the volume fraction of Cu nanoparticles can increase the temperature gain at the exit of the receiver tube by 6.4%. Furthermore, the temperature gradient in the cross-section of the collector increases as the direct normal solar... 

In this article, the hydrodynamic analysis and noise of the propeller and the surface vessel hull were examined. The model selected in this study is a KRISO Container Ship (KCS) with a five-bladed propeller. Initially, the hydrodynamic analysis of the propeller in open water mode and then in self-propulsion mode was investigated using computational fluid dynamics. Simulations were carried out using a commercial solver, STAR-CCM+ (RANS equations with FVM and VOF model). Finally, the emitted noise from the propeller and the vessel hull was investigated using Fox William Hawkins equations. The pressure distribution and hydrodynamic performance (thrust, torque, efficiency) of the propeller in... 

This paper presents a case study and numerical simulations of a corner of a deep excavation in Tehran supported by soldier piles and ground anchors. This study focuses on the differences between 2D and 3D numerical modelling in estimating the wall deflection at the corner locations of the excavation. Furthermore, the performance of modelling with Mohr–Coulomb constitutive law was compared with the result of a hardening soil model. The modelling procedure was calibrated against a full-scale instrumented tieback wall at Texas A&M University and the monitoring data of the excavation project. The results indicated that the hardening soil model yields reasonable predictions of wall deflection in... 

Rod-shaped samples of maraging steel were additively fabricated in vertical and horizontal directions using laser powder bed fusion technique. The samples were first aged at 490 °C for 6 h and then subjected to dynamic compressive tests using Split Hopkinson Pressure Bar apparatus. The dynamic compression tests were conducted on vertical samples at strain rates of 190, 460, 810, 1100, 1300 s−1. However, the high strain rate tests were performed at strain rates of 120, 615, 745, 890, 2200 s−1 on horizontal samples. After applying the compressive impact loads on the samples, it was found that although horizontally built samples exhibit higher dynamic strength, vertically built samples show... 

Although viability of low-salinity waterflooding (LSWF) at the laboratory scale has been proven, there are some challenges associated with its field application, which sheds uncertainties on its economic success. One of the challenges is the minimum required volume of low-salinity water, which should be injected to the reservoir due to the salt dispersion in porous media. Once the low-saline brine is injected into the reservoir, mixing of injected (low-salinity) and resident (high-salinity) brines occurs and the developed mixing zone grows continuously as the front moves from the injection well toward the production well. Increase in the salinity of the front reduces the efficiency of LSWF.... 

Purpose: Spiral-wound heat exchangers (SWHEs) are widely used in different industries. In special applications, such as cryogenic (HEs), fluid properties may significantly depend on fluid temperature. This paper aims to present an analytical method for design and rating of SWHEs considering variable fluid properties with consistent shell geometry and single-phase fluid. Design/methodology/approach: To consider variations of fluid properties, the HE is divided into identical segments, and the fluid properties are assumed to be constant in each segment. Validation of the analytical method is accomplished by using three-dimensional numerical simulation with shear stress transport k-ω model, and... 

In this article, the hydrodynamic analysis and noise of the propeller and the surface vessel hull were examined. The model selected in this study is a KRISO Container Ship (KCS) with a five-bladed propeller. Initially, the hydrodynamic analysis of the propeller in open water mode and then in self-propulsion mode was investigated using computational fluid dynamics. Simulations were carried out using a commercial solver, STAR-CCM+ (RANS equations with FVM and VOF model). Finally, the emitted noise from the propeller and the vessel hull was investigated using Fox William Hawkins equations. The pressure distribution and hydrodynamic performance (thrust, torque, efficiency) of the propeller in... 

Using our recently developed model, for the first time in the literature, the effect of fluid/fluid and rock/fluid interactions on the performance of Low Salinity Waterflooding (LSWF, as an Enhanced Oil Recovery process) at pore-doublet scale is investigated. The model is incorporated into OpenFOAM and both the Navier-Stokes equation for oil/water two-phase flow and the advection-diffusion equation for ion transport (at both fluid/fluid and rock/fluid interface) are solved via direct numerical simulation (DNS). The model is validated against imbibition and drainage pore-doublet experiments reported in the literature, and then applied to investigate the sole effect of wettability alteration... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Using our recently developed model, for the first time in the literature, the effect of fluid/fluid and rock/fluid interactions on the performance of Low Salinity Waterflooding (LSWF, as an Enhanced Oil Recovery process) at pore-doublet scale is investigated. The model is incorporated into OpenFOAM and both the Navier-Stokes equation for oil/water two-phase flow and the advection-diffusion equation for ion transport (at both fluid/fluid and rock/fluid interface) are solved via direct numerical simulation (DNS). The model is validated against imbibition and drainage pore-doublet experiments reported in the literature, and then applied to investigate the sole effect of wettability alteration... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Do all the clayey soils have the same behavior in terms of the generation and dissipation of excess pore water pressure during the piezocone penetration process? To find the answer, a coupled numerical simulation of CPTu in clays based on finite element analysis is presented in this paper. In this regard, the numerical modeling is verified by some laboratory tests on the samples with known initial conditions and stress states as well as field measurements of piezocone testing. Generation of excess pore water pressure during the penetration process is then investigated at different locations around the cone. This study encompasses piezocone penetration in both normally consolidated and... 

Comprehensive numerical analyses are conducted to simulate and capture “Buzz” phenomenon in a supersonic mixed compression air inlet. The buzz is an unsteady self-sustained feature that occurs in supersonic inlets, especially when operating in their subcritical condition. In such a situation, the shock waves oscillate along the inlet and cause mass flow fluctuations inside the inlet that will deteriorate the engine performance significantly. An axisymmetric unsteady numerical simulation was used to solve the Navier–Stokes equations combined with the URANS SST k–ω turbulence model. The simulations for two different free-stream Mach numbers of M∞=2.0 and 2.2 and at two specific subcritical... 

Photovoltaic (PV) panels provide a suitable way for the direct conversion of solar energy into electricity. The electrical output and efficiency of PV modules are dependent on working temperature. The present study contributes to investigate the efficiency of utilizing a flat plate closed-loop pulsating heat pipe (CLPHP) to cool down a PV panel in both thermal and economic aspects. Accordingly, a numerical investigation is employed to obtain the surface temperature and electrical gain of the PV panel through four scenarios, including natural cooling without additional equipment, CLPHP-based passive cooling, CLPHP-based active cooling, and a conventional flat plate cooling methods. The... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Stepped planing hulls have the potential to reach high-speeds in the sea. The step on the bottom of these vessels influence the pressure distribution and thus stability of the vessel, especially in transverse plane. Understanding the behavior of these vessels in a non-zero heel condition is fundamental in the early stage design. In the current paper, numerical simulation of the viscous flow field around a heeled one-stepped planing hull is performed to evaluate influences of the asymmetric planing on the performance of the vessel. The numerical model is validated in two steps. At the first step, performance of a heeled stepless planing hull operating in calm water is simulated using the... 

Free or restricted shock separation phenomena can occur inside a thrust optimized parabolic (TOP) nozzle during over-expanded operations. In the case of restricted shock separation, a cap shock pattern forms in the nozzle which leads to a substantial total pressure drop. This induces further related issues in the process of ground testing of such nozzles using a second throat exhaust diffuser (STED). In the present study, the flow physics in several TOP nozzles operating at over-expanded conditions is investigated numerically. At first, the strong effect of the initial expansion angle of a TOP nozzle on flow separation pattern and shock structure is demonstrated. Results reveal that for high...