Sharif Digital Repository

A Zn-Rich (GaN)1−x(ZnO)xnanostructure was synthesized with the assistance of a high-gravity technique in order to reduce the reaction time and temperature. The synthesized inorganic nanomaterial has been applied in both drug and gene delivery systems, and as the first fully inorganic nanomaterial, it was investigated in a comprehensive cellular investigation as well. In order to increase the potential bioavailability, as well as the interactions with the pCRISPR, the nanomaterial was enriched with additional Zn ions. The nanomaterial and the final nanocarrier were characterized at each step before and after any biological analysisviaFESEM, AFM, TEM, FTIR and XRD. The polymer coated... 

A series of nanohybrids using ZIF-8 in the presence of chitosan (CS) at various compositions (0.5–15 wt%) were synthesized. Thorough characterization exhibited that the morphology of the nanoparticles in terms of surface charge, particle size, specific surface area, and pore volume is significantly dominated by the CS content in the hybrid nanoparticles. Amongst the nanoparticles synthesized, a hybrid nanoparticle containing 2 wt% CS, named CS-ZIF-2, represented the largest positive zeta potential and smallest particle size. Moreover, adsorption experiments indicated that CS-ZIF-2 had considerable adsorption capacity against anionic dye (Congo Red, CR) compared with the individual ZIF-8 and... 

In this article, wave propagation behavior of a size-dependent spinning graphene nanoplatelet-reinforced composite (GNPRC) cylindrical nanoshell with porosity is presented. The effects of small scale are analyzed based on nonlocal strain gradient theory (NSGT), this accurate theory employs exact length scale parameter and nonlocal constant. The governing equations of GNPRC cylindrical nanoshell coupled with piezoelectric actuator (PIAC) are evolved by minimum potential energy principle and solved by the analytical method. For the first time in the current study, wave propagation-porosity behavior of a GNPRC cylindrical nanoshell coupled with PIAC is examined based on NSGT. The results show... 

Discrimination of chiral targets is generally achieved with chiral nanomaterials. However, the limited number of intrinsic chiral nanostructures as well as their complex synthesis procedure has led to the production of chirality-induced nanomaterials as alternatives. Chirality can be induced in nanomaterials by either chirality transfer or the formation of chiral assemblies. Using the latter approach, in this work, we have provided chiral supramolecular assemblies of CdTe quantum dots (QDs) from achiral starting materials. CTAB-QD assemblies showed chiroptical activities, and their orange emission in combination with the blue emission of carbon dots was utilized as a ratiometric chiral... 

Discrimination of chiral targets is generally achieved with chiral nanomaterials. However, the limited number of intrinsic chiral nanostructures as well as their complex synthesis procedure has led to the production of chirality-induced nanomaterials as alternatives. Chirality can be induced in nanomaterials by either chirality transfer or the formation of chiral assemblies. Using the latter approach, in this work, we have provided chiral supramolecular assemblies of CdTe quantum dots (QDs) from achiral starting materials. CTAB-QD assemblies showed chiroptical activities, and their orange emission in combination with the blue emission of carbon dots was utilized as a ratiometric chiral... 

A series of heterogeneous catalysts including different molar ratios of CaO/talc was synthesized to study the transesterification reaction of canola oil and methanol under different reaction conditions. Characterization and kinetic results revealed that the activity of this catalyst was enhanced due to the increase of CaO/talc molar ratio value leading to an improvement in the biodiesel production. Moreover, the effect of various parameters on the activity of the undertaken catalysts was studied in order to determine the optimum process conditions. Leaching measurements and the durability of the CaO/talc catalyst under several reaction cycles were evaluated and proved it to be a stable... 

Liquid phase deposition is a method to grow conformal TiO2 films with good crystallinity on various substrates. The growth depends on the hydrophilicity of the substrate surface and we found that mica is a substrate capable of forming uniform and thick films. Films were grown using an aqueous solution of TiF4 through a hydrolysis-condensation process. We have studied films properties; morphology, porosity and thickness, in terms of growth conditions, i.e. TiF4 concentration, growth temperature, deposition time and pH. The porosity of films was shown to rapidly increase from about 18% to about 25% and remained the same for longer growth times. The growth process of films could be identified... 

SQUID (superconducting quantum interference device) microscopes are versatile instruments for biosensing applications, in particular for magnetic nanoparticle detection in immunoassay experiments. We are developing a SQUID microscope based on an HTS rf SQUID magnetometer sensor with a substrate resonator. For the cryogenic set-up, a configuration was realized in which the cryostat is continuously refilled and kept at a constant liquid nitrogen level by an isolated tube connection to a large liquid nitrogen reservoir. The SQUID is mounted on top of a sapphire finger, connected to the inner vessel of the stainless steel cryostat. The vacuum gap between the cold SQUID and room temperature... 

Composites of unsaturated polyester containing 5 wt% nanoclay and different amounts of lead monoxide particles (0, 10, 20, and 30 wt%) were prepared. XRD patterns showed the exfoliation of nanoclay layers in the polymer. Morphological properties of the composites were studied using SEM micrographs. The prepared composites were investigated for their thermal resistance and mechanical properties using thermogravimetric analysis and tensile testing method, respectively. Addition of lead monoxide to the polymer worsened its thermal resistance and tensile properties, whereas the observed negative effects could be moderated by the clay nanoparticle. Gamma attenuation performance of the composites... 

CdS nanoparticles were grown using CdSO4 and Na 2S2O3 as the precursors and thioglycerol (TG) as the capping agent. TG was shown to exhibit a catalytic role in the reaction and also acted as a capping agent. It was demonstrated that size growth is linearly related to the temperature of the reaction, i.e.the sizes can be controllably adjusted by temperature. The crystalline phase of the nanocrystals was also dependent on the temperature of growth: higher temperature favours the cubic phase. The pH also plays an important role in nanoparticle growth, as lower pH leads to a higher release rate of sulfur species. At pH as high as 10, the growth rate remains slow even at boiling temperature. This... 

In this research, thermal buckling and forced vibration characteristics of the imperfect composite cylindrical nanoshell reinforced with graphene nanoplatelets (GNP) in thermal environments are presented. Halpin–Tsai nanomechanical model is used to determine the material properties of each layer. The size-dependent effects of GNPRC nanoshell is analyzed using modified couple stress theory. For the first time, in the present study, porous functionally graded multilayer couple stress (FMCS) parameter which changes along the thickness is considered. The novelty of the current study is to consider the effects of porosity, GNPRC, FMCS and thermal environment on the resonance frequencies, thermal... 

In this paper, we have studied the effect of annealing under slightly oxidizing ambient (N2+O2) on the structural and electrical characteristics of a limited number of silicon nanoparticles embedded in an ultra-thin SiO2 layer. These nanoparticles were synthesized by ultra-low-energy (1 keV) ion implantation and annealing. Specific experimental methods have been used to characterize the ncs populations. They include transmission electron microscopy (TEM) Fresnel imaging for evaluating the distances and widths of interest and spatially resolved electron energy loss spectroscopy (EELS) using the spectrum-imaging mode of a scanning transmission electron microscope (STEM) to measure the size... 

Titanium anodes coated with noble metal oxides are widely used in chlorate industry. In fact, these anodes are dimensionally stable. In this article, the electrochemical characteristics of the ternary oxide coating created by sol-gel on titanium, which consisted of Ti, Ru and Ir, were investigated in the number of different layers. The electrochemical properties of anodes, morphology of samples, and phase analysis were investigated respectively by cyclic voltammetry and polarization measurements, Field Emission Scanning Electron Microscope (FESEM) and XRD. The result indicated that the application of the more layer number increases the rate of chlorine evolution. Also, The morphology of the... 

In this study, a hybrid of silica nanosphere/multiwall carbon nanotube (MWCNT) has been synthesized by wet chemical method at room temperature. The effect of MWCNTs, silica nanospheres and hybrid nanostructures (80% silica nanosphere/20% MWCNT and 50% silica nanosphere/50% MWCNT) on the thermal conductivity of distilled water has been investigated. SDBS was used as the dispersant to stabilize nanomaterials in the aqueous suspension and its concentration was 1.5 times of the concentration of nanomaterials. As results show, by increasing the concentration of nanomaterials, effective thermal conductivity of nanofluids increased. The most and the least enhancement in the effective thermal... 

Superparamagnetic Iron Oxide Nanoparticles (SPIONs) were synthesized and coated with pseudopolyrotaxanes (PPRs) and proposed as a novel hybrid nanostructure for medical imaging and drug delivery. PPRs were prepared by addition of α-cyclodextrin rings to functionalized polyethylene glycol (PEG) chain with hydrophobic triazine end-groups. Non-covalent interactions between SPIONs and PPRs led to the assembly of SPIONs@PRs hybrid nanomaterials. Measurements of the 1H Nuclear Magnetic Resonance (NMR) relaxation times T1 and T2 allowed us to determine the NMR dispersion profiles. Comparison between our SPIONs@PRs hybrid nano-compound and the commercial SPION compound, Endorem®, showed a higher... 

Polyrotaxanes consisting of cyclodextrin rings, polyethylene glycol axes and quantum dot (QD) stoppers were synthesized and characterized. The molecular self-assembly of polyrotaxanes led to spindlelike nano-objects whose shape, size and position were dominated by QD stoppers. Due to their well-defined molecular self-assemblies, carbohydrate backbone, high functionality and several types of functional groups together with the high luminescence yield, synthesized hybrid nanostructures were recognized as promising candidates for biomedical applications. The potential applications of the molecular self-assemblies as drug-delivery systems was investigated by conjugation of doxorubicin (DOX) to... 

The nitrate-citrate gels exhibit auto-catalytic behavior, which can be used to synthesize the nanocrystalline YIG powders. In this study yttrium iron garnet (Y3Fe5O12) nanocrystalline powders were prepared by a sol-gel auto-combustion process. The influence of pH value of the precursor solution on the combustion behavior and the garnet phase formation of synthesized powders were investigated by scanning electron microscopy (SEM), thermal analysis (DTA/TGA), infrared (IR) spectroscopy and X-ray diffraction technique (XRD). The results show that with increasing pH value, the combustion rate increases. The as-burnt powder prepared with pH 1 yielded a single phase YIG after calcination at 800...