Sharif Digital Repository

Conventionally, a film of TiO2 particles of 300 nm size is employed in Dye-sensitized solar cells (DSCs) as the back reflector film to enhance the light harvesting. Perfect reflectance of silver in visible and near infrared motivates to investigate its potential as the material for the light back reflector film in DSCs. In this study, light back reflector films consisting of 300 nm-sized silver particles, as well as vacuum evaporated silver flat film, were fabricated and compared to 300 nm-sized rutile-type TiO2 particulate reflector film to study their optical aspects. Conventional TiO2 rutile-type particulate film demonstrates slightly lower performance... 

In the past few years, organic–inorganic metal halide ABX3 perovskites (A = Rb, Cs, methylammonium, formamidinium (FA); B = Pb, Sn; X = Cl, Br, I) have rapidly emerged as promising materials for photovoltaic applications. Tuning the film morphology by various deposition techniques and additives is crucial to achieve solar cells with high performance and long-term stability. In this work, carbon nanoparticles (CNPs) containing functional groups are added to the perovskite precursor solution for fabrication of fluorine-doped tin oxide/TiO2/perovskite/spiro-OMeTAD/gold devices. With the addition of CNPs, the perovskite films are thermally more stable, contain larger grains, and become more... 

Nowadays, putting forward an accurate cancer therapy method with minimal side effects is an important topic of research. Nanostructures, for their ability in controlled and targeted drug release on specific cells, are critical materials in this field. In this study, a pH-sensitive graphene oxide-l-arginine nanogel was synthesized to carry and release 5-fluorouracil. Optimized conditions using statistical analysis, based on the maximum relative viscosity of nanogel, were evaluated: 5.489 for the concentration of l-arginine and 2.404 for pH. The prepared nanogels were characterized using scanning electron microscope and transmission electron microscope images and Fourier-transform infrared... 

In this article, wave propagation behavior of a size-dependent spinning graphene nanoplatelet-reinforced composite (GNPRC) cylindrical nanoshell with porosity is presented. The effects of small scale are analyzed based on nonlocal strain gradient theory (NSGT), this accurate theory employs exact length scale parameter and nonlocal constant. The governing equations of GNPRC cylindrical nanoshell coupled with piezoelectric actuator (PIAC) are evolved by minimum potential energy principle and solved by the analytical method. For the first time in the current study, wave propagation-porosity behavior of a GNPRC cylindrical nanoshell coupled with PIAC is examined based on NSGT. The results show... 

Here, a newly modified chitosan tetrazole was synthesized and fully characterized for CRISPR technology since by increasing the ratio of nitrogen to other elements, the interaction between the genetic material and this nanomaterial was significantly enhanced. The nanomaterial was added to HEK-293 cells for pCRISPR delivery. The nanomaterials were optimized and showed an acceptable binding ability with DNA due to its increasing zeta potential in the synthesized chitosan tetrazole in comparison with chitosan, as well as considerable transfection efficiency, more than 25%, and, thus, can be considered as a promising and also new gold-standard for the delivery of pCRISPR. © 2020 Taylor & Francis... 

In this study, injectable PEG-based hydrogels containing Laponite particles with mechanical and structural properties close to the natural articular cartilage are introduced. The nanocomposites are fabricated by imide ring opening reactions utilizing synthesized copolymers containing PEG blocks and nanoclay through a two-step thermal poly-(amic acid) process. Butane diamine is used as nucleophilic reagent and hydrogels with interconnected pores with sizes in the range of 100–250 µm are prepared. Improved viscoelastic properties compared with the conventional PEG hydrogels are shown. Evaluation of cell viability utilizing human mesenchymal stem cells determines cytocompatibility of the... 

Used lubricating oil (ULO) is a heavy mixture of various hydrocarbons and needs to be treated before discharging. Considering ULO nature, it is more favorable to recover lighter hydrocarbon cuts from ULO, which not only improves the whole process economically, but also prevents the emission of hardly decomposable hydrocarbons into the environment. In this research, the potential of pyrolysis method for ULO recovery was studied. Furthermore, graphene nanoplatelets (GNP), γ- Fe2O3 and ZnO nanoparticles were used to improve the kinetics of the process and their impacts on the final product quality were evaluated. Based on the results, adding nanomaterials increased the tendency to produce gas... 

In this study, conductive sodium alginate/polyaniline/graphene (PAG) NGCs were fabricated utilizing a straightforward solution extrusion method. The 4 point-probe test revealed that the addition of PAG has increased the conductivity of the NGCs up to 9.7 × 10−3 S.cm−1. The results also showed a remarkable increase in the Young modulus and SEM images revealed that the suggested process could produce NGCs continuously and uniformly with desirable porosity. The Fourier-transform infrared spectroscopy spectrum proved a good interaction between PAG and the polymeric matrix. Furthermore, the addition of PAG slightly prevented biodegradation of the NGCs. Finally, the cell viability assay confirmed... 

Here, a newly modified chitosan tetrazole was synthesized and fully characterized for CRISPR technology since by increasing the ratio of nitrogen to other elements, the interaction between the genetic material and this nanomaterial was significantly enhanced. The nanomaterial was added to HEK-293 cells for pCRISPR delivery. The nanomaterials were optimized and showed an acceptable binding ability with DNA due to its increasing zeta potential in the synthesized chitosan tetrazole in comparison with chitosan, as well as considerable transfection efficiency, more than 25%, and, thus, can be considered as a promising and also new gold-standard for the delivery of pCRISPR. © 2020 Taylor & Francis... 

Recent investigations on multifunctional piezoelectric semiconductors have shown their excellent potential as photovoltaic components in high-efficiency third-generation quantum nanostructure (QNS) solar cells. The current work is devoted to studying the electro-elastic behavior of high-density QNS photovoltaic semiconductors within which initial mismatch strains of arrays of quantum dots (QDs) or quantum wires (QWRs) induce coupled electro-mechanical fields. The inter-nanostructure couplings which are of great importance in high-density QNS arrays are incorporated in the presented analytical framework. In practice, QNSs with different geometries such as spherical, cuboidal, or pyramidal QDs... 

Despite various applications of hydrogels, they have poor gel strength and low resistance against crack propagation which lead to the limitation of their applications. For overcoming this inherent weakness, the current study has focused on the simultaneous utilization of interpenetrating polymer network (IPN) structure and nanocomposite hydrogels. It is known that IPN and nanocomposite gels can improve gel strength. The combination of IPN and nanocomposite structure was developed in hydrogels for improving gel strength. For this purpose, bentonite was successfully modified with a cationic surfactant, (3-methacrylamidopropyl) trimethyl ammonium chloride (MAPTAC), as intercalate, and... 

Despite the various uses of hydrogels, one of their weaknesses is the poor gel strength. To overcome this restriction, the current study has focused on simultaneously employing an interpenetrating polymer network (IPN) structure and nanocomposite hydrogels. Through this approach, the influence of nanofiller in the single network and IPN hydrogel properties was also studied in detail. For this purpose, a novel full interpenetrating polymer network (IPN) hydrogel nanocomposite based on 2-acrylamido-2-methylpropane sulfonic acid (AMPS)/acrylic acid (AA)–sodium acrylate (AANa) was synthesized in two steps through a facile solution polymerization with incorporation of modified bentonite (MBE) as... 

CuCo2O4 spinel nanopowders were synthesized by sol–gel method. The optimal values of pH and molar ratio of citric acid to metal ions (RC), and the influence of the calcination temperature and time were investigated. As-prepared materials were characterized by XRD, TGA, DSC, FE-SEM and electrical and coefficient of thermal expansion (CTE) measurements. It was found that pH = 4.5 and RC = 1 are the optimum conditions to produce pure CuCo2O4 nanopowders. The electrical conductivity was increased remarkably from 15.2 to 27.5 S cm−1 with an increase in temperature from 500 to 800 °C. Over the temperature range of 25–800 °C, the CTE of... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

In the last two decades, quantum dots nanomaterials have garnered a great deal of scientific interest because of their unique properties. Quantum dots (QDs) are inorganic fluorescent nanocrystals in the size range between 1 and 20 nm. Due to their structural properties, they possess distinctive properties and behave in different way from crystals in macro scale, in many branches of human life. Cadmium telluride quantum dots (CdTe QDs) were labeled with 68Ga radio nuclide for fast in vivo targeting and coincidence imaging of tumors. Using instant paper chromatography, the physicochemical properties of the Cadmium telluride quantum dots labeled with 68Ga NPs (68Ga@ CdTe QDs) were found high... 

In this research, an efficient biosorption system was developed for methylene blue adsorption over in situ hydrothermally synthesized magnetite 4-hydroxybenzoic acid cellulose nanohybrid. The material was characterized with EDX, VSM, FT-IR, FESEM, and TEM techniques. Results showed that the nanohybrid is a micro-cluster composed of stacked nanoscale particles. Multivariate optimization with Box–Behnken design was used to evaluate effective parameters on adsorption and their interaction. Results showed that pH, shacking time, and adsorbent dosage are effective parameters on MB adsorption. Adsorption rate is fast with equilibrium time of 5.5 min. Isotherm study revealed that the adsorption... 

In this article, thermal buckling and frequency analysis of a size-dependent laminated composite cylindrical nanoshell in thermal environment using nonlocal strain–stress gradient theory are presented. The thermodynamic equations of the laminated cylindrical nanoshell are based on first-order shear deformation theory, and generalized differential quadrature element method is implemented to solve these equations and obtain natural frequency and critical temperature of the presented model. The results show that by considering C–F boundary conditions and every even layers’ number, in lower value of length scale parameter, by increasing the length scale parameter, the frequency of the structure...