Sharif Digital Repository

The effect of the nucleating agent masterbatch carrier resin on the nonisothermal crystallization of a pipe-grade polypropylene block copolymer was investigated at three different cooling rates using differential scanning calorimetry (DSC). Bis(3,4-dimethylibenzylidene) sorbitol (DMDBS), a well-known, third-generation sorbitol derivative, was used as a nucleating agent in this study. Crystallization kinetic parameters obtained from DSC cooling curves showed that incorporation of a nucleating agent by means of a masterbatch increased the crystallization rate by approximately two times compared to that of the sample with the same concentration of nucleating agent without the use of a... 

Objective: Spine kinematics, kinetics, and trunk muscle activities were evaluated during different stages of a fatigue-induced symmetric lifting task over time. Background: Due to neuromuscular adaptations, postural behaviors of workers during lifting tasks are affected by fatigue. Comprehensive aspects of these adaptations remain to be investigated. Method: Eighteen volunteers repeatedly lifted a box until perceived exhaustion. Body center of mass (CoM), trunk and box kinematics, and feet center of pressure (CoP) were estimated by a motion capture system and force-plate. Electromyographic (EMG) signals of trunk/abdominal muscles were assessed using linear and nonlinear approaches. The L5-S1... 

Rockfall is a significant hazard to sites that are located at the foot of rock slopes. In such sites, there is a notable need to evaluate the potential for rockfall, estimate the extent of areas at risk, and design retaining structures to reduce the risk of rockfall-induced. This paper presents a probabilistic framework for predicting the formation and progression of rockfalls and for evaluating the performance of retaining walls under rockfalls. To this end, first a probabilistic model for the rock projectile motion on a slope is presented. The model accounts for prevailing uncertainties, i.e., the trigger points, rock shape, projectile path, and slope material properties, which include... 

Two carbon composite materials were prepared by mixing avocado biochar and methyl polysiloxane (MK). Firstly, MK was dissolved in ethanol, and then the biochar was added at different times. In sample 1 (R1), the time of adding biochar was immediately after dissolving MK in ethanol, and in sample 2 (R2), after 48 h of MK dissolved in ethanol. The samples were characterized by nitrogen adsorption/desorption measurements obtaining specific surface areas (SBET) of 115 m2 g−1 (R1) and 580 m2 g−1 (R2). The adsorbents were further characterized using scanning electron microscopy, FTIR and Raman spectroscopy, adsorption of vapors of n-heptane and water, thermal analysis, Bohem titration, pHpzc, and... 

Electron guns are used as the electron sources in high-power electron tubes. The generated electron beam in electric guns passes through an aperture at the center of the anode. Since the electron beam has considerable kinetic energy, any collision between the electron beam and the anode aperture edge damages the electron gun. Therefore, electron guns are designed to meet the compatibility between the diameters of the electron beam and the anode aperture. However, this compatibility is disrupted during the transient time interval of the gun's power supply. In this article, the cause of failure of the electron gun of high-power electron tubes is investigated for the transient interval of the... 

The current study presents a numerical investigation on turbulent hydrothermal characteristics in a wavy passage equipped with discontinuous twisted tapes. The working fluid is water and passage walls are kept under constant wall temperature. The effect of Reynolds number (Re = 2500, 4500, 6500, 8500 and 10500), twist angle (TA = 90∘ and 180∘) and inclination angle (IA = 15∘ and 30∘) on velocity fields and streamlines, temperature contours, Nusselt number, friction factor, turbulent kinetic energy (TKE), thermal performance factor (TPF), energy efficiency factor (EEF) and entropy generation rate are evaluated. More uniform temperature and velocity fields can be found as both wavy passage and... 

In this work Halloysite nanotubes were used to synthesis a series of modified acrylamide/Quince seeds-based hydrogels (Poly (AAm-co-QS)/Haln). The as-prepared Poly (AAm-co-QS)/Haln hydrogels displayed improved performance as adsorbent in elimination of methylene blue (MB) from aqueous solution. The structures of the prepared Poly (AAm-co-QS)/Haln hydrogels were identified by XRD, FT-IR, FE-SEM, BET, TGA and EDX. Effect of pH value on the swelling behavior and dye adsorption performance of as-prepared hydrogels was explored. The adsorption MB results suggested that the adsorption kinetics fitted the pseudo-second-order model. The adsorption experiments at various pH condition indicated that... 

The oxygen evolution reaction (OER) with its sluggish kinetics has imposed a significant barrier to the sustainable and green generation of hydrogen fuel (via electrolysis of water) and the development of metal-air batteries. In this study, we report an efficient and novel OER electrocatalyst based on NiSe2nanoparticles (NPs) and the naturally abundant halloysite clay mineral. The NiSe2/halloysite nanocomposite (NiSe2/H) was prepared by a simple one-step hydrothermal route. The electrocatalytic performance of the as-synthesized nanocomposite and its components (pristine NiSe2and halloysite) toward OER in 1.0 KOH solution was examined. The NiSe2/H nanocomposite exhibited a significantly... 

The present study examined the effects of auxetic shoes on the biomechanics of the spine, as compared to barefoot and conventional shoe conditions, during gait and drop vertical jump (DVJ) activities using a combined in vivo and musculoskeletal modeling approach. Motion and force-plate data as well as electromyographic (EMG) activities of select trunk muscles of 11 individuals were collected during foregoing activities. In DVJ activity, two main phases of first landing (FL) and second landing (SL) were studied. In the FL phase of DVJ noticeable alternations were observed when auxetic shoes were used. That is, compared to the conventional footwear condition, smaller EMG activities in extensor... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

In this study, a series of Zirconium-based MOF and chitosan composites (MOF-808/chitosan) were synthesized as efficient adsorbent for Cr(VI) ions elimination from aqueous solution. MOF-808/chitosan structure and morphology was characterized by FE-SEM, EDX, XRD, BET, zeta potential analysis, FT-IR, XPS techniques. The kinetic studies ascertained that Cr(VI) adsorption over MOF-808/chitosan followed pseudo-second-order kinetic model. The adsorption isotherms fitted the Langmuir isotherm model, implying on homogeneously adsorption of Cr(VI) on the surface of MOF-808/chitosan. According to the Langmuir model, the maximum capacity was obtained to be 320.0 mg/g at pH 5. Thermodynamic investigation... 

The electrokinetic energy conversion, electroviscous effect, and induced internal and external magnetic fields in a smart polyelectrolyte grafted "soft"nanopore with pH responsiveness are studied here using an efficient molecular theory approach. The analysis is based on writing the total free energy of the system, including the conformational entropy of the flexible, self-avoiding polymer chains and the translational entropy of the mobile species, the electrostatic interactions, and the free energy due to chemical equilibrium reactions. Then, the free energy is minimized, while satisfying the necessary constraints to find the equilibrium state of the system. The predictions of the model are... 

In this study, in order to investigate the effect of the underlying pore-scale processes on continuum scale simulations of porous media dissolution, we improve the standard Lattice Boltzmann method using Quadtree grid refinement approach to simulate fluid flow and reactive transport through large domain sizes. Our results have shown considerable computational improvements up to 80% in simulation time together with increased numerical accuracy. The results and the added value of the new approach are discussed using comparison of our model with the conventional LBM. Moreover, we have applied a systematic analysis by increasing complexity levels and starting from fluid flow and continuing with... 

A study has been made to determine the influence of the carbon content on the kinetics of dynamic and static recrystallization during and after hot deformation of carbon steels. For this purpose, single- and double-hit hot compression experiments at various strain rates and temperatures together with the Avrami-type kinetics equation and Bergstrom approach have been utilized to investigate recrystallization behavior. The results show that the apparent activation energy of hot deformation decreases with increasing carbon content and this phenomenon results in a faster dynamic recrystallization at high temperatures and/or low strain rates. Also, increasing carbon content leads to a higher rate... 

This article deals with the adsorption performances of the unmodified nanodiamond (ND) and thermally oxidized nanodiamond (Ox-ND) for the removal of different heavy metal ions such as Fe (III), Cu (II), Cr (VI), and Cd (II) from wastewater. The adsorption capacities of the ions onto adsorbents are higher and follow the order: Ox-ND-3 > Ox-ND-1.5 > ND, which is consistent with their surface areas, zeta potentials, and the presence of carboxyl groups, suggesting that electrostatic attractions between the positive metal ions and the negatively charged adsorbents are the predominant adsorption mechanisms. Adsorption capacities of these adsorbents were found to be 26.8, 31.3, and 45.7 mg/g for Fe... 

This paper presents an integrated two-dimensional numerical framework for simulating rainfall-induced landslides from instability initiation to post-failure flow. To describe the entire process, three steps are considered in this study: (1) a coupled hydrostability analysis which detects the failure plane using the Finite Element Method (FEM) (pre-failure stage); (2) computing the local rheology of the failed mass (wet sandy soil) based on the water saturation at the onset of failure using the saturation-based rheological model (transition stage); and (3) a continuum-based propagation analysis which solves the flow of the wet material employing the Smoothed Particle Hydrodynamics (SPH)... 

In this contribution, the effect of physical immobilization of methylene blue (MB) into silica nanocomposites was investigated on the conversion and selectivity of the photooxygenation of anthracene and dihydroartemisinic acid (DHAA). Physically immobilized photocatalysts were synthesized through a developed Stöber method and were thoroughly characterized by UV–Vis, FTIR, XRD, XPS, SEM, TEM, HR-TEM, BET-BJH, and EDX analyses. Based on the TEM and UV–Vis results, it was determined that enhancement of the MB concentration as an organocatalyst for the Stöber reaction led to an increase in the size of the nanoparticles from 54 to 183 nm and a 21 nm blue shift in their UV–Vis spectra. Moreover,... 

The fabrication of Ni/Ti laminated composite via cross accumulative roll bonding (CARB) and subsequent annealing treatment has been studied. The relationships between annealing conditions and microstructure at interfaces of Ni/Ti have been investigated by SEM, XRD, and EDS analyses. The results show that the layers were well-bonded by the CARB process, and by increasing the temperature and time of annealing treatment, the interfacial layers grew as a result of the interdiffusion of Ni and Ti atoms. The main intermetallic phases were NiTi and NiTi2, both of which obeyed linear kinetics of growth. However, the calculated activation energy of NiTi was lower than that of NiTi2, indicating the... 

In this research, a green solid catalyst of phosphomolybdic acid (HPA) prated on Chitosan was synthesized to produce biodiesel. The prepared catalyst was characterized using Fourier Transform Infrared spectroscopy (FTIR), Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-Ray (EDX), X-ray diffraction (XRD), and XRF analyses. The catalyst was applied in microwave-assisted trans-esterification of Pomegranate oil, and the biodiesel production process was optimized by response surface methodology based on central composite design (RSM-CCD). The effect of influential reaction parameters, including time (33–142 min), catalyst weight (0.15–5.6 wt%), and methanol to oil molar... 

The development of active, durable, cost-effective, and stable electrocatalysts is an urgent need for various industrial fields including renewable energy systems. The state-of-the-art catalysts suffer from poor water splitting activity in alkaline media due to their sluggish kinetics, high cost, and scarcity on earth to be scaled up. Herein, we present an electrochemical analysis of a nanostructured electrocatalyst based on a face-centered cubic (FCC) copper-rich Cu-Ni-Fe-Cr-Co alloy with a quasi-spherical morphology electrodeposited on a highly porous nickel substrate. Electrochemical studies determine the enhanced electrocatalytic activity toward both hydrogen and oxygen reactions in an...