Sharif Digital Repository

Myocardial infarction (MI) causes a high mortality rate in the world every year. Myocardial tissue engineering using extracellular matrix-derived substrate and cytocompatible biopolymers is a promising approach for treating MI. Besides, injectable porous microspheres are developing engineer constructs to use as dual-purpose microcarriers for cell culture and injectable scaffolds in trivial invasiveness for tissue implantation. This study aimed to fabricate porous microcarriers composed of myocardial extracellular matrix and chitosan using an electrospraying technique. The effect of electrospraying parameters, including extracellular matrix/chitosan ratio and voltage, on MCs diameter was... 

Conventional wastewater treatment processes are not completely effective in removing vancomycin. In this study, affecting parameters on vancomycin degradation, such as pH, catalyst, initial vancomycin concentration, temperature, and reaction time were investigated simultaneously during a removal process based on titanium dioxide with ultraviolet irradiation in an aqueous solution. Titanium dioxide was synthesized and characterized using X-ray diffraction and scanning electron microscopy. The average size of the synthesized crystals was 4.7 (± 0.2) nm. Design of experiments was done by a central composite design based on the response surface methodology and multiple linear regression was... 

Purpose: Loss of skeletal muscle mass, which depends on a balance between protein synthesis and degradation, is common in sarcopenia, cachexia, and some diseases. The purpose of this study was to investigate the alterations and interactions of protein synthesis and degradation signaling components induced by 8-week endurance exercise training with a normal diet. Methods: Two exercise (n = 8) and control (n = 7) groups of Wistar rats were kept under standard conditions. The exercise group performed 8-week endurance running at 65–70% VO2max, 30–60 min, on a treadmill with 0° slope, and the rats of the control group were maintained under identical conditions except exercise training.... 

Volatile organic compounds (VOCs) represent a very important class of pollutants that causes serious health effects. There is an urgent requirement to establish efficient technologies that can reduce and control VOCs. Non-thermal plasma (NTP) is an emerging technology that can decompose low concentration VOCs. However, the low efficiency and high power cost are major hindrances in its commercialization. In this work, Co–Cu with TiO2 support catalysts are prepared by using the deposition precipitation method and utilized in post-plasma catalysis for the efficient degradation of toluene selected as a model VOC. The synergistic effect of Co–Cu/TiO2 with different Co/Cu molar ratios along with... 

A new magnetic composite was synthesized by integration of ZnFe2O4 and MIL-53(Fe) micro-rods by a solvothermal method. This composite served as a heterogeneous catalyst to overcome the high electron-hole recombination rates of ZnFe2O4 and to enhance the degradation of Direct Red 23 under visible light irradiation. Different analytical techniques, including XRD, FTIR, SEM, DRS, VSM, and PL, were employed to characterize the synthesized heterojunction nanocomposite and to evaluate its photocatalytic activity. The ZnFe2O4/MIL-53(Fe)/Vis-light system resulted in significantly higher dye degradation as compared with pristine ZnFe2O4 and MIL-53(Fe) semiconductors at the optimum pH of 3.1 and... 

The effects of zinc content (2 and 4 wt%), heat treatment (solution-Treated and T6), as well as hot deformation (extrusion and multi-directional forging (MDF)) on the microstructure, mechanical and degradation behavior of Mg-Zn alloys were studied. As the result of microstructure refinement, solid solution and precipitate strengthening (formation of MgZn second phases), the strength of pure Mg was increased after Zn addition. Solution treatment of the Mg-4Zn alloy resulted in 16% softening due to the dissolution of the MgZn second phases and also grain growth, while aging treatment increased the strength value by 8% in comparison to the as-cast material because of the formation of the fine... 

Tissue adhesives have been widely used for preventing wound leaks, sever bleeding, as well as for enhancing drug delivery and biosensing. However, only a few among suggested platforms cover the circumstances required for high-adhesion strength and biocompatibility, without toxicity. Antibacterial properties, controllable degradation, encapsulation capacity, detectability by image-guided procedures and affordable price are also centered to on-demand tissue adhesives. Herein we overview the history of tissue adhesives, different types of polysaccharide-based tissue adhesives, their mechanism of gluing, and different applications of polysaccharide-based tissue adhesives. We also highlight the... 

Hydrogen as an energy carrier can play a significant role in reducing environmental emissions if it is produced from renewable energy resources. This research aims to assess hydrogen production from wind energy considering environmental, economic, and technical aspect for the East Azerbaijan province of Iran. The economic assessment is performed by calculation of payback period, levelized cost of hydrogen, and levelized cost of electricity. Since uncertainty in the power output of wind turbines may affect the payback period, all calculations are performed for four different turbine degradation rates. While it is common in the literature to choose the wind turbine based on a single criterion,... 

Public concern over environmental issues such as ecosystem degradation is high. However, restoring coupled human-natural systems requires integration across many science, technology, engineering, management, and governance topics that are presently fragmented. Here, we synthesized 544 peer-reviewed articles published through September 2020 on the desiccation and nascent recovery of Lake Urmia in northwest Iran. We answered nine questions of scientific and popular interest about causes, impacts, stabilization, recovery, and next steps. We find: (1) Expansion of irrigated agriculture, dam construction, and mismanagement impacted the lake more than temperature increases and precipitation... 

Coating is an effective approach to address the high corrosion rate of biodegradable Mg alloys, as their main challenge toward their extensive use. In this regard, it was tried to control the degradation process of an Mg-4Zn alloy by Ca addition, equal channel angular pressing (ECAP), and hydrothermal coating. The obtained results indicated that excellent grain refinement induced by Ca incorporation and ECAP simultaneously, improved both mechanical strength and corrosion resistance of the Mg-based substrate. The achieved grain refinement resulted in a thicker, more compact and integrated coating, where the ECAP-processed Mg-4Zn-0.5Ca alloy exhibited the best coating quality with no... 

In this study, magnesium oxide (MgO) nanoparticles are incorporated on carbon nanotubes (CNTs) to reinforce Mg-3Zn-1Mn alloy (ZM31 alloy) by semi-powder metallurgy, followed by hot extrusion, with the purpose of improving the mechanical and biological properties of Mg-based alloy. The microstructural analysis of the nanocomposites indicated a reduction in grain size of Mg alloy with the incorporation of CNTs with a maximum reduction of 61% (ZM31/CNTs), with further reduction in grain size (68%) detected when MgO integrated CNTs composites (ZM31/MgO-CNTs). The compression characteristics of the composites indicate an increase in ultimate compressive strength of 36% and 44%, respectively, with... 

Objective(s): Bioresorbable scaffolds have been advocated as the new generation in interventional cardiology because they could provide temporary scaffolds and then disappear with resorption. Although, the available stents in clinical trials exhibited biosafety, efficacy, no death, and no apparent thrombosis, Mg-substrate degradation on drug release has not been investigated. Materials and Methods: Therefore, more research has been needed to legitimize the replacement of current stents with Mg-based stents. UV-Vis spectrophotometer, scanning electron microscope (SEM), X-ray diffraction (XRD), pH measurement, H2 evolution, and corrosion tests determined the change in hybrid properties and... 

Preparation of the defective TiO2 nanoparticles (NPs) have been recently in particular interest for its outstanding applications in visible-light active photocatalysis. In order to make TiO2 visible-light absorber, optical band gap should be modified especially via introducing structural defects like oxygen vacancies as an effective pathway. In this research, we prepared defective rutile TiO2 NPs with highly efficient photocatalytic activity under visible light. The NPs were synthesized by electric arc discharge in water as a cost-effective and environmentally friendly method with capability of defect formation which followed by heat treatment. The photocatalytic activity improvement... 

Photocatalytic wastewater treatment and concurrent energy production or metal ions conversion to less harmful products have great potential to address both environmental and energy challenging issues, two of the most significant problems facing humankind. Many efforts have been devoted for achieving enhanced photocatalytic activity as well as optimizing reaction conditions and materials design. In this context, various strategies were applied to develop efficient dual-functional photocatalysts for environmental purification and simultaneous energy production. Concurrent photocatalytic degradation of organic pollutants and Cr(VI) reduction to less toxic Cr(III) improved the rate of both... 

Metal-organic frameworks (MOFs) have recently achieved much attention to eliminating toxic pollutants because of their attractive attributes, including large specific surface area, ultra-high porosity, abundant active adsorption sites, tunable surface chemistry, well-controlled pore size distribution, and strong host–guest interactions. Among the many developed MOFs, the Zr-based MOFs, particularly the UiO-66 family, are considered extremely attractive for wastewater treatment applications. The fascinating properties of UiO-66 such as high thermal stability, superior chemical resistance towards several solvents, including benzene, acetone, different alcohols, dimethylformamide, acidic and... 

Developing an efficient visible-light-driven photocatalyst is believed to be a practical solution for clean energy and environmental remediation. The present study aimed to broaden current knowledge of the graphitic carbon nitride (g-C3N4)-based plasmonic photocatalysts by decorating polydopamine-grafted g-C3N4 (PDA/g-C3N4) with silver nanoparticles (AgNPs). The nanocomposite was prepared using a facile synthesis method, while XPS and microscopy measurements confirmed the homogenous dispersion of AgNPs on PDA/g-C3N4. AgNPs successfully reduced the recombination rate of photoinduced electron-hole pairs. The calculated bandgap energy was decreased from 2.7 eV for pure g-C3N4 to 2.1 eV for... 

In this contribution, spinel MgAl2O4 nanospheres prepared by the combustion method were coupled with thermally-exfoliated g-C3N4 nanosheets (TE-GCN) through an efficient isoelectric point-assisted calcination technique. Physical characteristics of the synthesized nanocomposite were understudied utilizing the XRD, FT-IR, FE-SEM, TEM, BET-BJH, UV–Vis DRS, PL, and EIS analyses. This material was used as a novel nano-photocatalyst for degradation of reactive red 195 (RR195) industrial dye contaminant. Results revealed that, a successful synthesis of a heterojunction between the components of the nanocomposite was achieved. This exhibited an enormously improved electron-hole separation leading to... 

Biodegradable magnesium implants possess excellent mechanical properties and biocompatibility, which make them suitable candidates to be employed as temporary structures for the bone regeneration purposes. However, there are still important challenges which limit their extensive use in biomedical applications, where the most important ones include implant-associated infection, rapid degradation rate and the need for improved mechanical properties. Silver, which is a strong antimicrobial agent, has been extensively used for improving the mentioned challenges in biodegradable Mg alloys either as alloying element or incorporation in the protective coating. Ag addition has been reported to have... 

The current design procedure known as Force-Based Design (FBD) method, generally, does not lead to uniform distribution of drift, hysteretic energy, and ductility demands (or structural damage) along the height of the moment frames under strong earthquakes and these performance parameters can be much higher and concentrate damage on one or more of the lower structural stories. This paper presents an iterative wave propagation (WP) based technique to calculate the seismic nonlinear response of multistory buildings as an extension of the layered soil media, founded on bedrock and subjected to vertically propagating shear waves, which leads to the introduction of a new Lateral Load Pattern... 

Investigations have shown the traces of antibiotics in surface water, groundwater, wastewater treatment plants, and drinking water. However, conventional wastewater treatment is not entirely effective for vancomycin degradation. Advanced oxidation is one of the most widespread methods of antibiotic degradation in aqueous media. Vancomycin was quantified by high-performance liquid chromatography. The Response Surface Methodology (RSM) based on Central Composite Design (CCD) was used to explore and optimise the effect of the independent variables on vancomycin degradation. Independent variables were as follows: pH (3–11), vancomycin concentration (15–75 mg/L), TiO2–clinoptilolite (25–125 mg in...