Sharif Digital Repository

A highly controllable, green, and rapid strategy is demonstrated for fabricating of highly sensitive non-enzymatic glucose sensing platforms. Carbon nanohorns (CNHs) were decorated onto the screen-printed electrodes. Binary nickel-cobalt sulfide (NiCo-S) nanosheets (NSs) were then deposited on CNH-casted electrodes by a facile and scalable method. Following detailed structural characterization and the electrocatalytic activity of the fabricated NiCo-S/CNH electrodes towards electro-oxidation of glucose was examined in detail. The proposed electrodes operated within two distinct linear dynamic ranges of 0.001- 0.330 mM and 0.330 - 4.53 mM with sensitivities of 1842 µA.mM−1.cm−2 and 854... 

Here, we report the synthesis and characterization of a binuclear Co(ii) complex (Co2(2py)2Cl4) with two dinaphtho-diazacrown ether macrocyclic ligands, bearing two pyridine arms as a colourimetric and fluorescent sensor for detecting different xylene isomers as well as acting as a catalyst for the oxidation of o- and m-xylene under vacuum at room temperature. Chromogenic detection occurred when Co2(2py)2Cl4 was exposed to the xylene isomers, wherein the original blue colour of the complex changed to green and green-blue in the presence of o- and m-xylene, respectively. Meanwhile, no colour change was observed in the presence of the p-xylene isomer. Fluorescence spectroscopy revealed that... 

In this project, the protective effect of Biebersteinia multifida root extract (BMRE) against corrosion of 1018 low carbon steel (1018LCS) in HCl solutions was appraised by assessing weight loss, electrochemical impedance spectroscopy (EIS), and polarization at 25 °C. The maximum inhibitory efficacy for the concentration of 1 g/l of the BMRE was 92.8% at 25 °C after 2 h and increased to 95.3% after 24 h of immersion. Polarization experiments have shown that the extract in acidic solutions can act as a mixed corrosion inhibitor. The corrosion inhibitory efficacy of BMRE decreased with increasing temperature, and at all temperature settings studied, the adsorption of BMRE molecules on 1018 LCS... 

We introduce highly antifouling Polymer-Nanoparticle-Nanoparticle/Polymer (PNNP) hybrid membranes as multi-functional materials for versatile purification of wastewater. Nitrogen-rich polyethylenimine (PEI)-functionalized halloysite nanotube (HNT-SiO2-PEI) nanoparticles were developed and embedded in polyvinyl chloride (PVC) membranes for protein and dye filtration. Bulk and surface characteristics of the resulting HNT-SiO2-PEI nanocomposites were determined using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Moreover, microstructure and... 

Electrochemical CO2 reduction reaction (CO2RR) has been studied in 0.1 M of KCl (pH of 6.96), NaHCO3 (pH of 8.3) and K2CO3 (pH of 11.36) cathodic solutions with various counter electrodes including graphite rod, SS316 rod and Pt mesh at different potential ranges on the Znx-Ni1-x bimetallic electrocatalysts. Among the Znx-Ni1-x electrocatalysts, the Zn-Ni electrode with a composition of 65 wt% Zn and 35 wt% Ni and cluster-like microstructure has the best performance for CO2RR by according to minimum coke formation and optimum CO and H2 faradaic efficiencies (CO FE% = 55% and H2 FE% = 45%). The cyclic voltammetry (CV) measurements and gas chromatography (GC) analysis for the CO2RR showed that... 

Metal-organic frameworks (MOFs) have recently achieved much attention to eliminating toxic pollutants because of their attractive attributes, including large specific surface area, ultra-high porosity, abundant active adsorption sites, tunable surface chemistry, well-controlled pore size distribution, and strong host–guest interactions. Among the many developed MOFs, the Zr-based MOFs, particularly the UiO-66 family, are considered extremely attractive for wastewater treatment applications. The fascinating properties of UiO-66 such as high thermal stability, superior chemical resistance towards several solvents, including benzene, acetone, different alcohols, dimethylformamide, acidic and... 

Lightweight geopolymer concretes have gained attention because of their superior durability, lower environmental impact and sustainable characteristics. They are the product of natural or artificial aggregates with low specific gravities mixed with aluminosilicate binders, and an alkaline solution. In this study, different aspects of lightweight geopolymer concretes and mortars such as environmental and economic considerations, materials and mixture, durability-related properties like permeability, chloride attacks and performance at high temperatures, thermal conductivity, and the microstructure are reviewed. This study also discusses the effect of different geopolymer binders and various... 

Polyamide 6 (PA6)/carbon nanotube (CNT)/conductive carbon black (CCB) nanocomposites with the incorporation of physical and chemical dispersants were prepared via melt blending method to examine the synergistic enhancement of electrical conductivity. Investigation of modified CNT with octadecyl triphenyl phosphonium chloride (OTPC-CNT) as physical dispersant was performed by Fourier transform infrared, nuclear magnetic resonance, Raman spectroscopy, and thermogravimetric analysis. Morphological, electrical, rheological, and mechanical properties of PA6/CNT/CCB nanocomposites were examined by field emission scanning electron microscopy, transmission electron microscopy, digital insulation... 

The transformation of gibbsite to α-alumina occurs in the range 1100 to 1300°C. The higher the calcination temperature, the larger the crystallites and this leads to abnormal grain growth. The main goal of this research was to reduce the transformation temperature of gibbsite to α-alumina by reducing the gibbsite particles size. The sodium content of the gibbsite used in the study was reduced to less than 0.1% by washing it in HCl solution. It was then ground in a fast mill at ambient conditions for different times then calcined at different temperatures. The microstructure, particles size and thermal behaviour of the samples were examined with SEM, XRD, XRF, PSA and STA, respectively. In a... 

In this paper, the hydrodynamic behaviour of the chemical reaction system (selenium, tellurium, and TBP) was interpreted in the Oldshue-Rushton extraction column. The optimum operating parameters for extracting the selenium and tellurium from chloride medium were carried out by using the batch experiments. The feed acidity of 5 molar and solvent phase with 20% (v/v) TBP in kerosene were optimised to examine the hydrodynamic parameters of the mentioned column. The impacts of operating variables such as rotor speed, inlet aqueous phase velocity, and inlet solvent phase velocity on the dispersed phase hold-up, mean drop size, slip velocity, drop size distribution, and extraction rate were... 

A multi-residue method using gas chromatography coupled with flame ionisation detector has been developed for simultaneous determination of 10 pesticides in milk. The methodology involved a sample clean-up procedure using ‘quick, easy, cheap, effective, rugged and safe’ followed by a preconcentration step based on dispersive liquid–liquid microextraction. In this regard, acetonitrile was added to the milk sample with specific pH and ionic strength, and the mixture was rigorously shaken. The extracts were centrifuged; then, the organic phase (acetonitrile) was transferred to a test tube and was mixed with deionised water. The mixture was sonicated and chloroform was added as an acceptor phase... 

The rapid and effective separation of high-viscosity heavy crude oil from seawater is a worldwide challenge. Herein, an ultralow density, photothermal, superhydrophobic, and thermally conductive polyurethane/polyaniline/hexagonal boron nitride@Fe3O4/polyacrylic-oleic acid resin sponge (PU/PANI/h-BN@Fe3O4/AR) was fabricated with a water contact angle (WCA) of 158°, thermal conductivity of 0.76 W m-1 K-1, density of 0.038 g cm-3, limited oxygen index (LOI) of 28.82%, and porosity of 97.97% and used for solar-assisted separation of high-viscosity crude oil from water. Photothermal components were composed of PANI and Fe3O4, while h-BN particles were used as thermally conductive and flame... 

In the present study, metal complexes of 1-amidino-O-alkylureas were designed, synthesized and characterized by elemental analyses, FT-IR spectra, XRD, Mass analyses and scanning electron microscopy (SEM). All synthesized complexes were screen as α-Glucosidase inhibitors. According to the in vitro results, the Cu (II) complexes showed superior potency compared to other tested metal complexes. Particularly, [Cu(L-Me)2](Cl)2 (1b) showed the strongest inhibition against α-Glucosidase with an IC50 value of 2.75 ± 0.3 µM which was comparable to that of acarbose (IC50 = 750 µM). These findings are supported by the ligands and enzyme interactions through molecular docking. © 2021 Elsevier B.V  

In this work, synthesis of CuIn0.75Ga0.25S2 (CIGS) nanoparticles, the formation of stable dispersion, deposition of high-quality films and, fabrication of thin-film Perovskite solar cells are reported. The stability of nanoparticle ink is crucial in the formation of device-quality films. The chalcogenide-based materials are widely used in thin-film solar cells; in particular, Cu(In,Ga)S2 are used as an absorber and hole transporting layer. In the present study, the nanoparticles of about 20 nm size and bandgap of 1.5 eV are synthesized using a heat-up method. A variety of solvents are used as dispersing media and the stability of the inks is evaluated by precise optical monitoring. We... 

In this study, we have investigated the use of electrodeposited Au-Pt nanoparticles (AuPtNPs) on indium tin oxide (ITO) for the detection of Hg2+ heavy ions in water samples. The mechanism of AuPtNP electrocrystallization on ITO glass in an aqueous solution containing 0.5 mM HAuCl4 + 0.5 mM H2PtCl6 is described for the first time. The nucleation mechanism of monometallic AuNPs on ITO was found to be progressive; however, a transition from progressive to instantaneous was observed for bimetallic AuPtNPs at elevated overpotentials. The modified ITOs were then assessed for the electrodetection of Hg2+ in aqueous media. It was shown by differential pulse voltammetry (DPV) that the sensitivity of... 

In this paper, the performance of three imidazolium-based ionic liquids (ILs) including 1-hexyl-3-methylimidazolium chloride ([HMIM][Cl] or IL6), 1-octyl-3-methylimidazolium chloride ([OMIM][Cl] or IL8), and 1- dodecyl-3-methylimidazolium chloride ([DMIM][Cl] or IL12) in reducing the interfacial tension (IFT) between crude oil and IL solutions was analyzed for the first time under a wide range of salinities (1000 to 195 476 ppm) at a reservoir temperature of 80 °C. The purpose was to microscopically analyze the occurring phenomenon at the fluid-fluid interface to determine the mechanism leading to oil extraction and to address the existing ambiguities in the literature concerning the... 

Polyamide 6 (PA6)/carbon nanotube (CNT)/conductive carbon black (CCB) nanocomposites with the incorporation of physical and chemical dispersants were prepared via melt blending method to examine the synergistic enhancement of electrical conductivity. Investigation of modified CNT with octadecyl triphenyl phosphonium chloride (OTPC-CNT) as physical dispersant was performed by Fourier transform infrared, nuclear magnetic resonance, Raman spectroscopy, and thermogravimetric analysis. Morphological, electrical, rheological, and mechanical properties of PA6/CNT/CCB nanocomposites were examined by field emission scanning electron microscopy, transmission electron microscopy, digital insulation... 

Tolyltriazole (TTA) is a well-defined corrosion inhibitor for copper and copper alloys. However, there is little literature about its corrosion inhibition performance for mild steels in corrosive environments. This paper studied the electrochemical behavior of TTA in 0.5 M HCl solutions. Also, the morphology and nature of TTA layers on the steel surface were investigated. Electrochemical results showed that TTA is an excellent corrosion inhibitor for mild steel in acidic media with an efficiency of 91% for 0.07 M concentration. The results also indicated that TTA is a mixed-type inhibitor. XRD analysis revealed that the inhibition mechanism of TTA is based on the formation of an organic film... 

In this work, slag based aluminosilicate geopolymer was reinforced with polymeric fibers including, polyester (PES) (waste tire cap plies), polymeric particles including polyethylene terephthalate (PET) (waste water bottle), styrene-butadiene rubber (SBR) (waste tire), and polyvinyl chloride (PVC) (waste water hose). The tensile and compressive strength of the material was evaluated. Taguchi method was employed to assess the influence of the effective parameters on the mechanical characteristics of the geopolymer composite. QUALITEK-4 software was used to create the L32 orthogonal array with 192 (96+96) geopolymer specimens and 32+32 experiments. Analysis of variance (ANOVA) was utilized to... 

In this work, synthesis of CuIn0.75Ga0.25S2 (CIGS) nanoparticles, the formation of stable dispersion, deposition of high-quality films and, fabrication of thin-film Perovskite solar cells are reported. The stability of nanoparticle ink is crucial in the formation of device-quality films. The chalcogenide-based materials are widely used in thin-film solar cells; in particular, Cu(In,Ga)S2 are used as an absorber and hole transporting layer. In the present study, the nanoparticles of about 20 nm size and bandgap of 1.5 eV are synthesized using a heat-up method. A variety of solvents are used as dispersing media and the stability of the inks is evaluated by precise optical monitoring. We...