Sharif Digital Repository

In this paper, the problem of boundary stabilization of a vibrating non-classical micro-scale Euler-Bernoulli beam is considered. In non-classical micro-beams, the governing Partial Differential Equation (PDE) of motion is obtained based on the non-classical continuum mechanics which introduces material length scale parameters. In this research, linear boundary control laws are constructed to stabilize the free vibration of non-classical micro-beams which its governing PDE is derived based on the modified strain gradient theory as one of the most inclusive non-classical continuum theories. Well-posedness and asymptotic stabilization of the closed loop system are investigated for both cases... 

In this study, we apply a novel numerical technique for modeling the propagation of mechanical wave in the human arteries using the multiscale method. We define a particle region characterized by molecular dynamics (MD) method which is surrounded by a continuous region characterized by a finite element (FE) method. The interface between the two models are defined so as to minimize spurious reflections at the interface. This is a preliminary work for the modeling of the mechanical stability of atherosclerosis plaques using multiscale method. The model offered has extensive application in cell mechanics  

The controlled growth of metal oxide nanostructures within hierarchically porous conductive carbon-based frameworks is critically important to achieving high volumetric performance and appropriate channel size for energy storage applications. Herein, we grow cobalt oxide (Co3O4) nanoflakes, using a sequential-electrodeposition process, into spherically porous sponge-like few-layer partially reduced graphene oxide (SrGO) synthesized by template-directed ordered assembly. Maximum specific/volumetric capacitances of 1112 F gCo3O4-1 (at 3.3 A gCo3O4-1), 178 F cm-3 (at 2.6 A cm-2), and 406 F gtotal-1 (at 1 A gtotal-1) and sensible rate capability (80% retention by increasing the charge/discharge... 

Demand increasing for next generation portable and miniaturized electronics has aroused much interest to explore microscale and lightweight energy storage devices. Herein, we demonstrate successful development of flexible wire-shaped micro-supercapacitors (micro-SCs) based on novel CoNi2S4/E-NZP film@Cu wire electrode. The etched Ni-Zn-P (E-NZP) film was synthesized by directly deposition of NZP film on Cu wire, followed by a chemical etching process. Alkaline etching treatment provides a micro- and mesoporous structure with high surface area and facilitates the penetration of electrolyte ions into the electrode matrix. Then, CoNi2S4 nanosheets as electroactive material are electrochemically... 

Objective: This study aimed to employ nonlinear dynamic approaches to assess trunk dynamic stability with speed, symmetry, and load during repetitive flexion-extension (FE) movements for individuals with and without nonspecific low back pain (NSLBP). Background: Repetitive trunk FE movement is a typical work-related LBP risk factor contingent on speed, symmetry, and load. Improper settings/adjustments of these control parameters could undermine the dynamic stability of the trunk, hence leading to low back injuries. The underlying stability mechanisms and associated control impairments during such dynamic movements remain elusive. Method: Thirty-eight male volunteers (19 healthy, 19 NSLBP)... 

The development of asymmetric supercapacitors requires the design of electrode construction and the utilization of new electroactive materials. In this regard, an effective strategy is the loading of active materials on an integrated 3D porous graphene-based substrate such as graphene foam (GF). Herein, we successfully designed and fabricated a novel ternary binder-free nanocomposite consisting of polypyrrole, Fe-Co sulfide, and reduced graphene oxide on a nickel foam electrode (PPy/FeCoS-rGO/NF) via a facile, cost-effective, and powerful electrodeposition method for application in high-performance asymmetric supercapacitors. The monolithic 3D porous graphene foam (GF) obtained by the facile... 

Structural, half-metallic, magneto-optic, and thermoelectric properties of CrTiZ (Z = As, P) half-Heusleres compounds are investigated based on density functional theory. These compounds have mechanical stability in the ferromagnetic state with a high bulk modulus. They are often half-metallic with a large and integer magnetic moment and are very attractive in spintronics, magneto-optics applications. The magnetic moments of CrTiAs and CrTiP were 2.9865 μB and 3.00 μB, respectively, which were attributed to their ferromagnetic phase. Additionally, the positive sign of the phonon branches indicates the dynamic stability of these compounds. Applying both GGA and mBJ approximations, CrTiAs and... 

Introducing suitable electrode materials and electrolytes for supercapacitors and next-generation batteries should be considered for the industrial application of these devices. Among the proposed materials for them, transition metal chalcogenides (TMCs), are attractive and efficient options due to their unique properties such as appropriate layered structure, good oxidation state of transition metals, high thermal and mechanical stabilities, etc. However, applying other layered materials with high electrical conductivity e.g. carbon-based materials can lead to producing remarkable results for the mentioned applications. However, an interesting point is how making TMCs composite with... 

NaY zeolite nanoparticles were synthesized and shaped into the uniform spherical granules using a developed novel and simple two-step granulation technique. First, the alginate/nanozeolite or alginate/nanozeolite-bentonite spherical hybrid was successfully fabricated, and then the alginate was decomposed by calcinations resulting uniform spherical granules. To improve the mechanical stability of the prepared granules, bentonite was added as an inorganic binder at different ratios of 20wt.% to 40wt.%. Moreover, the effect of binder on the ion exchange properties of the prepared granules was studied. Increasing of binder content from 20wt.% to 40wt.% linearly enhanced the mechanical stability... 

In the present work, we report a chemically modified polyacrylamide/silica nanoporous composite adsorbent for the removal of reactive black 5 (RB5) azo dye from aqueous solutions. The composite adsorbent was synthesized in a packed bed and modified by ethylenediamine (EDA). The adsorbent was characterized by Fourier transformation infrared (FT-IR), thermogravimetric analysis (TGA), thermoporometry, Brunauer, Emmett and Teller (BET) method and scanning electron microscopy (SEM). Mechanical stability of the adsorbent was examined in a packed bed by following the back-pressure of the column. Pore diameter of the composite adsorbent in dry and wet states was estimated to be about 18.71 nm and... 

We fabricated gas sensors based on field ionization from multiwalled carbon nanotube (MWCNT) arrays grown on porous silicon templates. MWCNTs were grown through thermal chemical vapor deposition. We measured breakdown voltages, discharge and pre-discharge currents of the device for various gases in different concentrations. Our gas ionization sensors (GIS) presented good sensitivity, selectivity and short response time. The GISs based on porous substrates showed higher discharge current and good mechanical stability in comparison to those which were fabricated on polished silicon substrates. Additionally, we applied a high electric field to align CNTs. This increased the pre-breakdown... 

Soils are usually weak in tension therefore different materials such as geosynthetics are used to address this inadequacy. Worldwide annual consumption of geosynthetics is close to 1000 million m2, and the value of these materials is probably close to US$1500 million. Since the total cost of the construction is at least four or five times the cost of the geosynthetic itself, the impact of these materials on civil engineering construction is very large indeed. Nevertheless, there are several significant problems associated with geosynthetics, such as creep, low modulus of elasticity, and susceptibility to aggressive environment. Carbon fiber reinforced polymer (CFRP) was introduced over two... 

For a successful repair and reconstruction of bladder tissue, fabrication of scaffolds with proper biochemical and biomechanical characteristics is necessary. Decellularized bladder tissue has been proposed in previous studies as a gold standard material for scaffold fabrication. However, weak mechanical properties of such a load-bearing tissue has remained a challenge. Incorporation of both biological and synthetic materials has been known as an effective strategy for improving mechanical and biological properties of the scaffolds. In the present work, a simple process was developed to fabricate hybrid hydrogel scaffolds with a biomimetic architecture from the natural urinary bladder... 

Reverse osmosis (RO) membrane process has become the most promising technology for desalination to produce purified water. Among numerous polymeric materials used to fabricate RO membranes, aromatic polyamide thin film composite (TFC) membranes are dominant in commercial RO membrane processes because of their high salt rejection and water permeability as well as their excellent chemical, thermal, and mechanical stability. However, the major hindrance to the effective application of polyamide TFC RO membranes is membrane fouling. Furthermore, polyamide TFC RO membranes have limited stability to chlorine, which is commonly used as disinfect to control membrane biofouling. These two factors... 

Miniaturization of electronic devices with portable, flexible and wearable characteristics created a great demand for high-performance microscale energy storage devices with lightweight and flexible properties. Among the energy storage devices, wire-shaped supercapacitors (WSSCs) have recently received tremendous attention due to their tiny volume, wearability, high flexibility and potential applications in the next-generation portable/wearable electronic devices. Herein, we successfully fabricated a porous dendritic Ni-Cu film on Cu wire substrate (CWE) for fabrication of high-performance wire-type supercapacitors. The porous structure with dendritic morphology provides a high surface area,... 

In this article, a Molecular Structural Mechanics/Finite Element (MSM/FE) multiscale modeling of carbon nanotube/polymer composites with viscoelastic (VE) polymer matrix is introduced. The nanotube is modeled at the atomistic scale using structural molecular mechanics. The matrix deformation is analyzed by nonlinear finite element method considering VE behavior. The nanotube and matrix are assumed to be bonded by van der Waals interactions based on the Lennard-Jones potential at the interface. Using the MSM/FE multiscale model, we investigate the effect of carbon nanotube (CNT) on the improvement of mechanical stability of the nanocomposite. Also, the buckling behavior of these... 

A high-performing, lightweight, and flexible asymmetric supercapacitor (ASC) using NiCo-layered double hydroxide (NiCo LDH) supported on 3D nitrogen-doped graphene (NG) as a positive electrode and NG as a negative electrode is demonstrated. Highly conductive NG provides fast electron transfer and facilitates (dis)charging of NiCo LDH deposited on it. The composite electrode of NiCo LDH@NG exhibits a high specific capacitance of 1421 F g −1 at 2 A g −1 . Moreover, the as-obtained hybrid electrode shows an excellent rate capability with a specific capacitance of 1397 F g −1 at a high current density of 10 A g −1 , which is about 98% of the capacitance obtained at 2 A g −1 . The flexible ASC...