Loading...
Search for:
residence-times
0.007 seconds
Total 27 records
Exploring source water mixing and transient residence time distributions of outflow and evapotranspiration with an integrated hydrologic model and Lagrangian particle tracking approach
, Article Ecohydrology ; 2018 ; 19360584 (ISSN) ; Condon, L. E ; Danesh Yazdi, M ; Bearup, L. A ; Sharif University of Technology
John Wiley and Sons Ltd
2018
Abstract
Understanding the time water takes as it moves from rain or snowmelt through the terrestrial system to arrive as stream discharge, or evapotranspiration (ET) is an important hydrologic quantity. We develop a Lagrangian particle tracking method to capture transient residence times from source to either ET or outflow in an integrated hydrologic model. This method is parallel and efficiently captures time evolution of parcels of water in the model and tracks the source of water for hydrograph or ET separation. We demonstrate this model using hypothetical hillslope simulations driven by snow or rain dominated forcing and two different land cover types. We show that land cover and forcing both...
Novel type of two-impinging-jets reactor for solid-liquid enzyme reactions
, Article AIChE Journal ; Volume 52, Issue 2 , 2006 , Pages 692-704 ; 00011541 (ISSN) ; Sharif University of Technology
2006
Abstract
The isomerization of D-glucose to D-fructose using the immobilized glucose isomerase, as a typical model system of solid-liquid enzyme reactions has been carried out in a novel type of two-impinging-jets reactor (TIJR), which is characterized by a rotating inner cylinder in a stationary one. Because of the impinging process, turbulence, and complex trajectory of the solid particles within the reactor, the fractional conversion of glucose obtained in the TIJR increased dramatically compared to that obtained by conventional reaction systems. A compartment model was considered to describe the pattern of flow [residence time distribution (RTD) of solid particles] within the TIJR. Considering...
Study on Continuous Phase Holdup in a Pulsed Disc and Doughnut Extraction Column by Radiotracer Technique
, M.Sc. Thesis Sharif University of Technology ; Outokesh, Mohammad (Supervisor) ; Tabasi, Mohsen (Supervisor) ; Mostaedi, M.T (Co-Advisor)
Abstract
The dispersed phase holdup is one of the important parameters in the design pulsed column and set the column diameter, height and characteristics of flooding and mass transfer. High efficiency and low space requirements of these columns cause is particularly in the nuclear industry, Due to the possible presence of radiation and the need for protection against radiation, considered and used. In this project, the dispersed phase holdup and mean residence time in a pulsed disc and donut column in a semi-industrial scale using radiotracer and shut down methods compared and presented for water-kerosene system. Also axial dispersion coefficient in the column using radiotracer methods is calculated...
Estimation of temperature and residence time of carbon black oil furnace industrial reactors
, Article 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006, Chicago, IL, 5 November 2006 through 10 November 2006 ; 2006 ; 0791837904 (ISBN); 9780791837900 (ISBN) ; Soltanieh, M ; Sahebdelfar, S ; Bastani, D ; Javadi, K ; Sharif University of Technology
American Society of Mechanical Engineers (ASME)
2006
Abstract
In the absence of powerful rigorous models, in this research a simple but practical method for calculating the temperature and residence time and carbon black yield in oil-furnace reactors is proposed. For this purpose an empirical formula of the form CXHY is assumed for the carbon black feedstock based on typical feedstock used in this industry. Based on the prevailing reactor conditions, thermodynamic considerations and available outlet tail gas from the reactor, a few representative reactions are considered to describe the entire reaction network. These include complete combustion for the fuel and, incomplete combustion and pyrolysis for the feedstock. Carbon black yield can be estimated...
Continuous solid-state fermentation as affected by substrate flow pattern
, Article Chemical Engineering Science ; Volume 61, Issue 8 , 2006 , Pages 2675-2687 ; 00092509 (ISSN) ; Mitchell, D. A ; Beheshti, M ; Roostaazad, R ; Sánchez, L. R ; Sharif University of Technology
2006
Abstract
The performance of continuous solid state bioreactors having two different solid substrate flow patterns, namely plug flow and completely mixed flow, is quantified for both steady-state and transient operation using a simple mathematical model. The core assumption is that each substrate particle acts as an infinitesimal bioreactor. The residence time distribution of the particles is considered in the formulation of the equations for the mixed-flow bioreactor and the error that results from neglecting it is investigated by comparing the simulation results with those of a completely mixed, continuous bioreactor for submerged liquid fermentation (a chemostat). The model is extended to include...
Effect of empty bed residence time on biotrickling filter performance: Case study-triethylamine
, Article International Journal of Environmental Science and Technology ; Vol. 11, issue. 1 , 2014 , pp. 183-190 ; ISSN: 17351472 ; Bayat, R ; Keshavarzi Shirazi, H ; Sotoudeheian, S ; Sharif University of Technology
Abstract
In this study, a laboratory-scale biotrickling filter (BTF) is used to remove Triethylamine (TEA) from gaseous wastes. The BTF is made of stainless steel with a height of 210 cm and an internal diameter of 21 cm packed with lava rocks. TEA elimination pattern was evaluated by changing empty bed residence times (EBRTs). The maximum elimination capacity (EC) has been determined to be 87 g/m3/h. At all EBRTs 52, 31, 20, and 10 s, contaminant transferring from gas phase to liquid was more than the EC. Also, the removal efficiency was 100 % for a mass loading of 100 g/m3/h. While the liquid recirculation velocity of 3.466 m3/m2/h was maintained, the flow rate was adjusted to 60, 100, 156, and 312...
Numerical investigation of cone angle effect on the flow field and separation efficiency of deoiling hydrocyclones
, Article Heat and Mass Transfer/Waerme- und Stoffuebertragung ; Volume 49, Issue 2 , February , 2013 , Pages 247-260 ; 09477411 (ISSN) ; Maddahian, R ; Farhanieh, B ; Sharif University of Technology
2013
Abstract
In this study, the effect of cone angle on the flow field and separation efficiency of deoiling hydrocyclones is investigated taking advantage of large eddy simulation. The dynamic Smagorinsky is employed to determine the residual stress tensor of the continuous phase. The method of Lagrangian particle tracking with an optimized search algorithm (closest cell) is applied to evaluate the separation efficiency of deoiling hydrocyclone. Simulations are performed on a 35-mm deoiling hydrocyclone with the three different cone angles of 6, 10 and 20 degree. The numerical results revealed that the changes in the cone angle would affect the velocity and pressure distribution inside hydrocyclone, and...
Triethylamine removal using biotrickling filter (BTF): effect of height and recirculation liquid rate on BTFs performance
, Article International Journal of Environmental Science and Technology ; Volume 14, Issue 8 , 2017 , Pages 1615-1624 ; 17351472 (ISSN) ; Sotoudeheian, S ; Bayat, R ; Sharif University of Technology
Center for Environmental and Energy Research and Studies
2017
Abstract
This study investigated the removal of triethylamine using a biotrickling filter. The influence of affecting parameters, such as height and recirculation liquid rate (VL) on contaminant removal efficiency, was examined in detail. The results demonstrated that in the constant empty bed residence time (EBRT), when VL was increased, the removal efficiency (RE) increased. Also, for a specific VL, increasing EBRT could also increase RE values. However, it seems that an increasing VL is a more cost-effective way to enhance RE as compared to an increasing EBRT. The obtained outcomes represented that for a constant EBRT, an increase in inlet loading (IL) could decrease RE. For lower ILs, the removal...
The Effect of Sea Current on an Artificial Island
, M.Sc. Thesis Sharif University of Technology ; Abbaspour Tehrani Fard, Majid (Supervisor)
Abstract
With regards to rapid growth of world population, coastlines have limited natural resources and capacity for human settlement. To tackle the problem the idea of constructing artificial islands could be a solution. Since the artificial islands are semi-enclosed body of water designed to attract not only tourists but also settlements, the flow current pattern and residence time of water should be studied in detail in order to ensure adequate water quality in the surrounding area. In this study, an artificial island is planned to be constructed around Kish Island in Persia Gulf. In this article the effects of different geometries on circulation and residence time of water are investigated...
The Effects of Residence Time, Temperature and Particle size in Partially Reduction of Hematite to Magnetite VIA Fluidized bed Furnace
, M.Sc. Thesis Sharif University of Technology ; Halai, Mohammad (Supervisor)
Abstract
The Effects of temperature, residence time and particle size has been investigated on partial reduction of hematite to magnetite VIA fluidized bed reactor. Since there is water crisis in Iran, it is not rational to use gravity separation processes. Rather the best way is to use magnetic separation. Ghazvin’s region non-coking coal was used for gasifying step in various temperatures in order to produce the gas reduction agent. Golgohr’s mine waste concentrate were tested as the initial iron ore. For the very first time, the residence time of the particles were investigated by the change of height of reaction chamber, in 3 different heights, and the highest i.e. 15 cm had the best results. As...
Investigation of the Effect of Asphaltene on the Stability of Water-oil Emulsion
, M.Sc. Thesis Sharif University of Technology ; Taghikhani, Vahid (Supervisor) ; Baghban Salehi, Mahsa (Supervisor) ; Masihi, Mohsen (Supervisor)
Abstract
During the production of crude oil from reservoirs, the production of quantities of formation water along with this oil, causes the crude oil does not have the necessary indicators for transportation, refining and ultimately export. The presence of water and salt along with crude oil causes corrosion of refinery and transmission equipment and makes oil unfavorable in terms of economic efficiency (both for domestic use and for export). water and salt produce stable emulsion with oil that can be stable for a long time and can not be easily separated from crude oil. Therefore, separation of water and salt from crude oil is one of the most important issues in the oil industry. Breaking this...
Hydrodynamic Analysis of Fuel Motion in a Binary Bubbling Fluidized Bed using Markov Chains Method
, M.Sc. Thesis Sharif University of Technology ; Fotovat, Farzam (Supervisor)
Abstract
One of the main challenges in managing flow batteries usage is estimating their state of charge. Since The concentration of ions in the battery indicates the battery's charge and, on the other hand, the sensors for measuring the concentration are expensive, observers should be used to estimate the concentrations of the ions in the battery. This work is done by measuring the cell voltage, and finally, using the mathematical model of the battery, the amount of concentrations and state of charge is calculated. In this work, a vanadium flow battery was initially modeled accurately and mechanistically using COMSOL software to replace an actual flow battery in subsequent studies. Also, two...
Application of a continuous kinetic model for the hydrocracking of vacuum gas oil
, Article Petroleum Science and Technology ; Vol. 32, Issue. 18 , 2014 , Pages 2245-2252 ; ISSN: 10916466 ; Khorasheh, F ; Farhadi, F ; Sharif University of Technology
Abstract
Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and...
The joint reaction of methanol and i-butane over the HZSM-5 zeolite
, Article Journal of Industrial and Engineering Chemistry ; Volume 19, Issue 3 , May , 2013 , Pages 915-919 ; 1226086X (ISSN) ; Kazemeini, M ; Mohammadrezaee, A ; Golhosseini, R ; Sharif University of Technology
2013
Abstract
The effects of i-butane addition to methanol in MTP reaction were investigated over an in-house prepared HZSM-5 catalyst. It was observed that, propylene yield would be enhanced when i-butane fed to the reactor along with methanol. The rising growth of the propylene yield continued to peak on till the balance in thermal condition established. Similar trends have been observed when water was added to the mixture. The effect of WHSV with fixed water composition on product distribution was also studied. The optimum point where the highest amount of propylene yielded was shown to be high depended upon the temperature and residence time
Direct conversion of methane to methanol over v 2O 5/Sio 2 catalyst in a fixed-bed reactor utilizing a CFD model
, Article World Academy of Science, Engineering and Technology ; Volume 73 , 2011 , Pages 797-802 ; 2010376X (ISSN) ; Morteza, S ; Fattahi, M ; Sharif University of Technology
Abstract
A dynamic model of oxidation of methane to methanol has been developed in a fixed-bed reactor applying V2O5/SiO2 as the reaction catalyst. The standard k-? model with 10% turbulence amount performed. The effects of temperature (450- 500°C) and pressure (20-120 bar) with residence time of 3 seconds, on methane conversion and methanol or formaldehyde selectivity examined. Oxygen used as an oxidant and the amount of oxygen in feed was 5% mol/mol of methane amount. The results showed with increasing the conversion of methane from 0.66 to 1.52%, the selectivity to methanol decreased from 93.4% to 91.9%. The CFD modeling results showed reasonable agreement with the obtained experimental data of...
Evaluation and modeling of a newly designed impinging stream photoreactor equipped with a TiO2 coated fiberglass cloth
, Article RSC Advances ; Volume 5, Issue 12 , 2015 , Pages 9019-9027 ; 20462069 (ISSN) ; Mohammadi, M. M ; Sohrabi, M ; Royaee, S. J ; Sharif University of Technology
Royal Society of Chemistry
2015
Abstract
The photocatalytic degradation of p-nitrophenol (PNP) using TiO2 particles immobilized on a fiberglass cloth was investigated in a novel design of a photo-impinging stream reactor. A spray painted method has been used for the coating process. The structural properties of the immobilized sample were examined using X-ray diffraction and a scanning electron microscope (SEM). The photocatalytic degradation results showed the good performance of the reactor. The flow regime within the reactor was characterized and modeled by applying a liquid residence time distribution. A compartment model consisting of four continuous stirred regions was assigned to describe the flow pattern in the reactor. A...
CFD Simulation of hydrodynamic of a bubble column reactor operating in churn-turbulent regime and effect of gas inlet distribution on system characteristics
, Article International Journal of Chemical Reactor Engineering ; Volume 14, Issue 1 , 2016 , Pages 213-224 ; 15426580 (ISSN) ; Zarkesh, J ; Rashtchian, D ; Anvari, A ; Sharif University of Technology
Walter de Gruyter GmbH
Abstract
CFD simulation of cylindrical bubble column including air as dispersed phase and water as continuous phase operating in churn-turbulent flow regime with diameter of 0.49 m, height of 3.6 m and gas superficial velocity of 0.14 m/s have been conducted. All simulations have been carried out in a 2D axisymmetric, unsteady and Euler/Euler framework with the aid of commercial software FLUENT v. 14.5. Simulations were validated by our experimental results through residence time distribution (RTD) data. Effect of bubble size distribution at inlet on column hydrodynamic was investigated and results clearly showed that equilibrium bubble size distribution in most parts of column is independent of...
Numerical study of pollutant emissions in a Jet stirred reactor under elevated pressure Lean premixed conditions
, Article Mathematical Problems in Engineering ; Volume 2016 , 2016 ; 1024123X (ISSN) ; Shakeri, A ; Sharif University of Technology
Hindawi Publishing Corporation
2016
Abstract
Numerical study of pollutant emissions (NO and CO) in a Jet Stirred Reactor (JSR) combustor for methane oxidation under Elevated Pressure Lean Premixed (EPLP) conditions is presented. A Detailed Flow-field Simplified Chemistry (DFSC) method, a low computational cost method, is employed for predicting NO and CO concentrations. Reynolds Averaged Navier Stokes (RANS) equations with species transport equations are solved. Improved-coefficient five-step global mechanisms derived from a new evolutionary-based approach were taken as combustion kinetics. For modeling turbulent flow field, Reynolds Stress Model (RSM), and for turbulence chemistry interactions, finite rate-Eddy dissipation model are...
Effect of the geometry of a swirl generator on energy loss and shockwave position in arina nozzle
, Article Chemical Engineering and Technology ; Volume 43, Issue 8 , August , 2020 , Pages 1596-1607 ; Farhadi, F ; Sharif University of Technology
Wiley-VCH Verlag
2020
Abstract
To investigate the effect of the swirl generator (SG) on shockwave position and pressure drop, 3D simulation is conducted and validated by Arina's study. An increase of the blade number, height, and end angle leads to shockwave displacement toward the nozzle outlet. The maximum increment of the shockwave displacement, which is due to enlarging the angle of the blade end, is about 47 %. For this case, the pressure drop share of the SG is nearly half of the total pressure drop, while the residence time of particles is prolonged by about 51 %. As a general finding, increasing the swirl intensity provides a longer residence time to separate adequately the liquid from the gas. However, a higher...
Effect of material and population on the delivery of nanoparticles to an atherosclerotic plaque: a patient-specific in silico study
, Article Langmuir ; Volume 37, Issue 4 , 2021 , Pages 1551-1562 ; 07437463 (ISSN) ; Shamloo, A ; Barzegar, S ; Forouzandehmehr, M ; Sharif University of Technology
American Chemical Society
2021
Abstract
Coronary artery disease (CAD) is the prevalent reason of mortality all around the world. Targeting CAD, specifically atherosclerosis, with controlled delivery of micro and nanoparticles, as drug carriers, is a very proficient approach. In this work, a patient-specific and realistic model of an atherosclerotic plaque in the left anterior descending (LAD) artery was created by image-processing of CT-scan images and implementing a finite-element mesh. Next, a fluid-solid interaction simulation considering the physiological boundary conditions was conducted. By considering the simulated force fields and particle-particle interactions, the correlation between injected particles at each cardiac...