Sharif Digital Repository

The Latian dam is located on the Jajrood River in the northeast of Tehran the capital of Iran. It is one of the most important water supply reservoirs in this city and supplies 30 percent of the total water demand of 11 million people in this city. This research measures phosphorus release from sediments of Latian Dam and the role of the tubifex in phosphorus release. Because of sediment composition variation, sediment sample were taken from two points in the Latian dam. The sediments were analyzed for total phosphorus, the form of phosphorus and release rate under different conditions of water column and the absence or present of tubifex. The results show that the amount of phosphorus are... 

This study is concerned with a theoretical and laboratory investigation of selective withdrawal of a linearly stratified fluid through a line sink at the base of a reservoir with a side contraction. The width-averaged equations of motion are solved numerically. The evolution of selective withdrawal and the flow properties at the steady state are studied. Using the numerical results, an equation is proposed for the withdrawal layer thickness, the critical Froude number, and the density thickness. For comparison, experiments were conducted in a flume and particle image velocimetry technique was used to capture the flow field upstream of a contraction during evolution of selective withdrawal.... 

Dam construction in arid and semiarid regions is generally related to the risk of increased salinity, due to water passage in contact with salty formations. Hence, it is important to take reservoir thermal and salinity stratification into account in operational rules. In the present study, a simulation–optimization model was developed to determine the amount of water release from various outlets to discharge the brine from hypolimnion layer considering the downstream water quality limitations. The most appropriate time, rate, and concentration to release brine were determined based on water consumption conditions and downstream water demand and river ecology characteristics. The proposed... 

Spontaneous imbibition of water into the matrix is the most important mechanism for oil recovery in water wet fractured porous media. If the water is in contact with matrix and it is not flowing, the process is called static imbibition. The effect of rock and fluid properties, and boundary conditions on static imbibition are studied and formulated for scaling of the laboratory data to the reservoir scale. In reality, there is a continuous flow in a fracture; incorporating the effect of fracture flow into the scaling formulations is an unresolved issue in the modeling of the capillary imbibition recovery from the matrix. In this article, a new mathematical equation is developed to scale... 

The authors present the results of numerical tests and simulations to investigate and analyze the likelihood of asphaltene precipitation and deposition during CO2 flooding in a reservoir. The effects of asphaltene precipitation on oil properties such as oil viscosity and density during miscible CO2 flooding process were elaborated by using Winprop software of Computer Modeling Group. Also oil properties change during CO 2 miscible flooding by numerical slim tube were investigated by a compositional simulator (GEM). A fluid sample of Saskatchewan Reservoir that had been flooded miscibly with CO2 was chosen for performing the sensitivity analyses. The results showed that asphaltene... 

The objective of this study is to calibrate Priestley-Taylor (PT) model for estimating open water evaporation from an arid region reservoir called Chahnimeh. Chahnimeh Reservoir which is situated in the Sistan area in the southeast of Iran is being affected by regional energy advection during May to October. Therefore, common models of open water evaporation estimation such as PT require calibration. PT method was calibrated for Chahnimeh Reservoir using a volume balance method. Results showed that PT coefficient, αPT, as a constant over the year varies between 2.47±0.09 and 1.20±0.03 for two different hydrologic conditions of dry and wet. It means that there is also an intra-annular... 

One of the most important concerns in designing an embankment dam is seepage analysis. Conventional seepage analyses of embankment dams are performed in two-dimensional (2D) space, in which the impacts of water flow lines seeping from the side abutments are ignored. This fact is especially important if the dam is constructed in a narrow valley. In addition, if the effects of existing underlain faults in the reservoir water discharge rate, under different loading conditions, are to be scrutinized, three-dimensional (3D) modeling of the dam for seepage analysis is inevitable. In this paper, the significance of three-dimensional seepage analyses is emphasized by making a 3D model of a real dam... 

Dez reservoir dam is one of the famous dams in Khuzestan province in southwestern part of Iran. Operation of Dez reservoir dam and it's strategic position has an important role regard to providing country's net power, it's long precedence in operation, Dam dimension, multidisciplinary uses and existence of essential land use in downstream. Thus inflow forecasting could have a great role in effective operation of dam, flood non-structural and risk management by applying an effective flood warning. The more accurate the forecasting of inflow to reservoir will be results the less peak outflow and less risk to downstream. This paper presents a new Conjunctive nonlinear model using Wavelet... 

Recorded ground accelerations at various locations of Karun III Dam during November 20, 2007, were recorded by an array of accelerometers located on the dam. In terms of amplitude and phase, these accelerations show non-uniformities in different elevations. In this paper, the effect of these non-uniform ground motions on the seismic response of the dam taking dam-reservoir-foundation interaction into account is investigated. The EACD-3D-2008 finite element program and ABAQUS Software are used for carrying out the seismic analyses. For this purpose, time histories of the earthquake accelerations are interpolated at nodal points located on the dam foundation interface. The analysis has been... 

One of the acceptable assumptions in engineering practice is vertical propagation of earthquake waves. When the source of earthquake is located very deep in the ground, this assumption is valid, but for sources located in shallow ground, it loses its viability. In this study, linear seismic analysis of a system of concrete dam-massed foundation-reservoir is performed under inclined earthquake excitation. Both P- and SV-type earthquakes are considered for the purpose of the seismic analysis. To consider the effects of inhomogeneous waves for the case of SV wave propagation, post-critical angles are also considered in the analysis. To investigate the effects of earthquake frequency content on... 

An analytical/numerical model based on the assumption of rigid incompressible water column and compressible air bubble, is derived to simulate the pressure fluctuations, void fraction, air/water flow rate, water velocity in a closed conduit and water depth at upper reservoir due to formation of unstable slug flow. It is a comprehensive model which can generate different hydraulic situations of instability in a closed conduit based on hydraulic approach. The boundary conditions are the system of algebraic or/and simple differential equations. The steady solution of the governing differential equations is generally performed as the initial data. The frequency of pressure fluctuation and... 

Optimization of any production operation is a tool for increasing production rates and reducing production costs. Water flooding is one of the techniques that frequently be used to increase oil recovery after primary depletion. A methodology for optimizing the production by using the net present value of a heterogeneous reservoir under water flooding has been presented, which is based on controlling the bottomhole pressures of the production wells, using smart well technology. For this purpose, a numerical flow simulator is coupled with an optimization program. The technique was implemented on a synthetic two dimensional oil reservoir with heterogeneous permeability. This optimization... 

Most of the reported robust and non-robust optimization works are formulated based on a single-objective optimization, commonly in terms of net present value. However, variation of economical parameters such as oil price and costs forces such high computational optimization works to regenerate their optimum water injection policies. Furthermore, dynamic optimization strategies of water-flooding often lack robustness to geological uncertainties. This paper presents a multi-objective while robust optimization methodology by incorporating three dedicated objective functions. The goal is to determine optimized and robust water injection policies for all injection wells. It focuses on reducing... 

The low salinity water injection has become one of the most important studies in the oil industry for improving oil recovery compared to conventional seawater injection. Thus, extensive studies have been conducted in carbonate and sandstone reservoirs to investigate how the physical properties of rocks and the chemical composition of fluids influence low salinity effect, while, the carbonate reservoir rocks requires more investigation of the effect of molecular and/or ionic interactions. In this experimental work, the effectiveness of various water flooding schemes in carbonate reservoir rock samples is investigated. In this regard, the oil recovery potential of seawater (SW), reservoir... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

The main purposes of this study were to scrutinize experimentally effects of polymer and rock types on the oil recovery using water and polymer flooding processes. Four dynamic flooding experiments were carried out at simulated reservoir condition of temperature and pressure. According to the obtained results, the ultimate oil recovery by water flooding in highly fractured reservoirs was less than reservoirs with the microfractures. The results of polymer flooding showed that in addition the polymer molecular weight, the sulfonation of polymers also affects the oil recovery  

In past decades, many attempts have been made to use water-soluble polymers as a mobility control agent to improve sweep efficiency of enhanced oil recovery processes. However, sensitivity of the thickening behavior of these polymers to some harsh conditions, such as high salinity, has cast serious doubt on their applicability in reservoir conditions. By expansion of nanotechnology, scientists discovered that nanoparticles can be utilized as thickening and rheology control agents in many polymer solutions. In this study, hydrophilic fumed silica is added to hydrolyzed polyacrylamide and sulfonated polyacrylamide solutions. The effect of the addition of nano silica on the thickening and... 

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors... 

Asphaltene deposition has hindered oil production from asphaltenic oil reservoirs through deposition in reservoir rock and surface facilities. This paper investigates the effect of resin on asphaltene deposition at different pressures. To investigate the asphaltene deposition in the presence of resins at reservoir temperature and different pressures, a pressure, volume, and temperature (PVT) visual cell was designed. A high-resolution microscope and image processing software were used to detect and determine the amount of deposited asphaltene as well as its size distribution at different conditions. Two types of Iranian crude oils with different potential of deposition (low and high) were... 

The authors simulated a reservoir by using two-layer perceptron. Indeed a model was developed to simulate the increase in oil recovery caused by bacteria injection into an oil reservoir. This model was affected by reservoir temperature and amount of water injected into the reservoir for enhancing oil recovery. Comparing experimental and simulation results and also the erratic trend of data show that the neural networks have modeled this system properly. Considering the effects of nonlinear factors and their erratic and unknown impacts on recovered oil, the perceptron neural network can develop a proper model for oil recovery factor in various conditions. The neural networks have not been...