Sharif Digital Repository

In this study, we have used a low temperature plasma, produced by a DC magnetron sputtering device, for decolorizing of denim fabrics, and the effect of using different gases such as Argon and Oxygen as the discharge medium have been investigated. The results obtained under equal periods of time have been compared and the effect of washing on the treated denims has been reported. © 2006 Elsevier B.V. All rights reserved  

Plasma impulse technology (PIT) is one of the most innovative methods among the oil recovery enhancement (EOR) jobs. Although the low cost and persistent effects of this method has attracted researchers attentions to its self, the governing mechanisms of reservoir remediation in this method are still shrouded in mystery. This study presents a brief discussion on probable thermal mechanisms which govern the interaction between reservoir formation and plasma impulse jet. Minerals dissociation, opening the fused pathway and organic deposits melting seem to be of the most important thermal effects  

In this study, mathematical modeling of fixed-bed plasma reactor operated under isothermal condition was investigated. In this process, methane and acetylene were the inputted feed and ethane, ethylene, propylene, propane, i-butane, and n-butane were the output products. The amount of methane conversion obtained was 12.7% for the former feed, however, if pure methane was inputted this conversion rose to 13.8%. Furthermore, the plasma process enhanced the conversion as well as the selectivity toward the desired product and yield. In the present study, when methane and acetylene were fed at a molar ratio of CH4/C2H2 = 10 to the reactor, the selectivity of C2, C3, and C4 hydrocarbons was... 

The applicability of Plasma Impulse Technology (PIT) in the enhancement of oil recovery has been proved in recent years. The priority of this environmental friendly treatment has been proved by the Russian operators which has applied this technology on many production and injection wells. This study presents a brief discussion on probable pressure based mechanisms which govern the interaction between reservoir formation and plasma impulse jet. High pressure of the ejected plasma may cause formation fracturing, damage removal due to pressure shocks and reservoir fluid resonance  

Denim jeans have consistently been fashionable around the world. This fabric inspired strong opinions from historians, teenagers, and movie stars, and has acquired different styles throughout the years. Most jeans today are stonewashed; this technique first become popular in 1970. Now, in addition to pumice stones, enzymes are used on the cotton fabrics to create the stonewashed look. Nowadays, plasma treatment is a cost-effective and environment-friendly process which is able to modify the properties of the fabric surface in order to achieve this effect. Plasma surface treatment changes the properties of the fabric up to a limited depth (several molecular layers), leaving the bulk... 

In this research, microstructure and corrosion properties of plasma nitriding and post-oxidation treated AISI 316 austenitic stainless steel have been studied. The plasma nitriding treatment was carried out at 450 C for 5 h in a D.C. plasma setup with a gas mixture of 25% N2-75% H2 followed by post-oxidation in gas mixtures of O2/H2: 1/3, 1/5, 1/9 and 1/12 for 30 min. The treated samples were characterized by SEM, XRD and roughness testing. Potentiodynamic and cyclic polarization tests were also employed to evaluate the corrosion resistance of the samples. The results showed that plasma nitriding treatment decreases corrosion resistance of the steel substrate. However, post-oxidizing... 

The contribution of electrospun nanofibrous membranes (e.NFMs) in the biosensing platforms opens up a new prospect for the invention of faster and more sensitive analytical devices. In this paper, we utilized e.NFM of polyethersulfone (PES) as a solid substrate for the protein immobilization through two different approaches: physical and covalent. Scanning electron microscopy (SEM) and Fourier-transform-infrared (FTIR) tests were performed to study the effect of plasma treatment on protein immobilization efficacy. Moreover, taking advantage of ELISA technique, the influence of different parameters, namely, nanofibers diameter, membrane thickness, plasma treatment time, an incubation time of... 

This study involves the capability of severe shot peening (SSP) as a catalyst intake for plasma nitriding process and the probability of reducing the requirement of thermal energy individually on the diffusion of interstitial atoms. To this end, combination of mechanical-thermal energy is run with pure thermal plasma assisted energy. Therefore, SSP is exposed to AISI 304 austenitic stainless steel as a former treatment and gradient structured surface (nanograined zone, ultrafine grain martensite-twin intersections zone and twin densed zone) is created. Then, plasma nitriding at 400 0 C-4h and 475 0 C-2h temperature-duration conditions. The condition of 475 0 C-2h provides the requirements of... 

Low-frequency O 2 plasma was used to modify the surface of polysulfone gas-separation membranes. The effects of the treatment time and plasma power input on the membranes were also investigated. Pure CO 2 and CH 4 gas-permeation measurements were performed before and after plasma treatment. The results show the increase of permeability of the treated membranes due to surface ablation and surface polarization up to 5.63 and 68.80 gas-permeation units for CH 4 and CO 2, respectively, whereas, the CO 2/CH 4 selectivity of the treated membranes varied from 7.7 to 45.3, depending on the treatment conditions. Attenuated total reflection-Fourier transform infrared spectroscopy determined the... 

In this paper, the effect of plasma sputtering treatment on the natural dyeing properties of wool and the possibility of substituting it for mordant treatment have been studied. We used madder and weld as natural dyes and copper sulfate (CuSO4) as a metal mordant. We also used, copper as the electrode material, in a DC magnetron plasma sputtering device. The color strength of samples was analyzed using a Reflective Spectrophotometer and washing and light fastnesses were investigated according to I.S.O. standard recommendations. The results show that, the color strength and fastness of dyed wool samples have been improved after plasma treatment. The antibacterial counting test was also used... 

On silicon substrates, boron nitride nanosheets (BNNS) consisting of interconnected hexagonal boron nitride nano-layers were produced via chemical vapor deposition process at 1200 °C whose roughness's are at the micrometer- and nanometer-scale. The BNNS were functionalized in argon plasma admixed with ammonia or nitrogen or oxygen. The samples were characterized to investigate the surface chemistry and structural changes after plasma treatment using X-ray photoelectron spectroscope and Micro-Raman spectroscope techniques, respectively. While no significant changes in the surface features, upon plasma treatments of the BNNS, were noticed during SEM and TEM examination, the oxygen functional... 

This paper investigates the stall control over an airfoil employing dual excitation of separated shear layers with dielectric barrier discharge plasma actuators. This novel approach is studied experimentally on the NACA 0015 airfoil at the angle of attack and Reynolds number of 14° and 0.3×106, respectively. To analyze the baseline flow, Time-averaged pressure distributions on the airfoil surfaces are evaluated with 40 pressure taps. Further, the dominant natural frequencies associated with flow structures in the airfoil wake are examined utilizing a hot-wire anemometer. Two plasma actuators, one on the suction side just upstream the separation point and the other on the pressure side at the... 

The objective of the present study is to investigate the capability of field-programmable gate array hardware in numerical simulation of a model of a dielectric barrier discharge plasma actuator to accelerate the calculations. The reconfigurable hardware is designed such that it is possible to reprogram its architecture after manufacturing. This provides the capability to design and implement various architectures for several applications. Two reconfigurable chips are used in the present study, one of which consists of a programmable logic unit and a typical microprocessor. This hybrid architecture makes the high performance of the reconfigurable hardware in custom computing and the... 

In this study, the fatigue behavior of Ti-6Al-4V alloy is tend to be improved by severe plastic deformation via shot peening and plasma nitriding. Shot peening with sub-branches: Conventional shot peening (A12-14), severe shot peening (A28–30 and A34-36) and repeening (N6-8) are exposed. Besides plasma nitriding is implemented at 500 °C, 550 °C and 600 °C with the durations of 4, 8 and 16 h. Due to utilization of shot peening as prior severe plastic deformation during diffusion of nitrogen, two methods are applied in sequence. Severe shot peening forms ultra-fine crystals and oriented grains by disintegrating of α and β phases just below the surface and increases surface roughness. Plasma... 

PbS quantum dots (QDs) have been extensively studied for photovoltaic applications, thanks to their facile and low-cost fabrication processing and interesting physical properties such as size dependent and tunable band gap. However, the performance of PbS QD-based solar cells is highly sensitive to the humidity level in the ambient air, which is a serious obstacle toward its practical applications. Although it has been previously revealed that oxygen doping of the hole transporting layer can mitigate the cause of this issue, the suggested methods to recover the device performance are time-consuming and relatively costly. Here, we report a low-power oxygen plasma treatment as a rapid and... 

Electrospun porous membrane; Superhydrophilic surfaces; Superhydrophobic surfaces; Cell culture; Organ on a chip; Flexible membrane; Strong membrane; Surface modications  

onstructing of the scaffolds for cell culture applications has long been of interest for engineering researchers and biologist. In this study, a novel process is utilized for construction of suitable membrane with a high mechanical strength and appropriate surface behavior. Poly (dimethylsiloxane) (PDMS) is electrospun into fine fibers using poly (methyl methacrylate) (PMMA) as the carrier polymer in different weight ratios. Since the surface behavior of all PDMS substrates is moderately hydrophobic (120 < contact angle (CA) < 150), the electrospun membranes with higher PDMS ratios show slightly higher hydrophilicity. Direct plasma treatment is utilized to change the interfacial wettability... 

This paper investigates the potential of using an active flow control technique to modify stall flutter oscillations of a NACA (National Advisory Committee for Aeronautics) 0015 wing section. Wind tunnel experiments have been performed with a test-rig that provides the elastic degree of freedom in pitch. Measurements of the clean airfoil are taken at preset angles of θ 0 = 6 ° - 12 °, and for Reynolds numbers of R e c = 6.2 × 10 4 - 1.25 × 10 5, which reveal the dependency of the stall flutter oscillations to Rec and θ0. Then, flow control experiments are carried out at θ 0 = 10 ° and R e c = 1.04 × 10 5. Two dielectric barrier discharge plasma actuators have been employed simultaneously to... 

In this study, mathematical modelling of oxidative coupling of methane (OCM) to C 2 hydrocarbons (C 2H 6 and C 2H 4) over La 2O 3/CaO catalyst in a fixed-bed reactor operated under isothermal and non-isothermal conditions was investigated using the MATLAB program. In this process, methane and acetylene were the inputted feed and ethane, ethylene, propylene, propane, i-butane and n-butane were the output products. The amount of methane conversion obtained was 12.7% for the former feed however; if pure methane was inputted this conversion rose to 13.8%. Furthermore, the plasma process would enhance the conversion, selectivity towards desired product and process yield. A comparison between the... 

In the current study, the hybrid effect of a corona discharge and γ-alumina supported Ni catalysts in CO 2 reforming of methane is investigated. The study includes both purely catalytic operation in the temperature range of 923-1023 K, and hybrid catalytic-plasma operation of DC corona discharge reactor at room temperature and ambient pressure. The effect of feed flow rate, discharge power and Ni/γ-Al 2O 3 catalysts are studied. When CH 4/CO 2 ratio in the feed is 1/2, the syngas of low H 2/CO ratio at about 0.56 is obtained, which is a potential feedstock for synthesis of liquid hydrocarbons. Although Ni catalyst is only active above 573 K, presence of Ni catalysts in the cold corona plasma...