Sharif Digital Repository

Proper design of wireless personal and local area networks requires accurate characterization of radio wave propagation in indoor environments. The Shooting-and-Bouncing-Ray tracing (SBR) method, which uses Geometrical Optics (GO) approximation, has been widely used for indoor propagation modeling [1-2]  

In this paper we present and investigate a digital design and implementational details of a wireless optical CDMA (OCDMA) system based on generalized optical orthogonal codes (OOCs). A detailed digital implementation analysis and transmitter/receiver architectures in the context of the above design are fully studied. We analyze various subsystems for a wireless OCDMA system including detector and receiver structure, acquisition, and tracking blocks as well as evaluating their performance in a typical wireless OCDMA communication system. By analyzing two main parts of the system, namely, chip-level detector and OCDMA receiver blocks we evaluate the performance of the overall system.... 

In this paper we present and investigate a digital design and implementational details of a wireless optical CDMA (OCDMA) system based on generalized optical orthogonal codes (OOCs). A detailed digital implementation analysis and transmitter/receiver architectures in the context of the above design are fully studied. We analyze various subsystems for a wireless OCDMA system including detector and receiver structure, acquisition, and tracking blocks as well as evaluating their performance in a typical wireless OCDMA communication system. By analyzing two main parts of the system, namely, chip-level detector and OCDMA receiver blocks we evaluate the performance of the overall system.... 

It's well known that "hidden- and exposed-terminal" are among the main problems in ad-hoc WLAN networks. In addition, there are scenarios where the desired destination is located in the range of other transmitters, so that the efforts on setting up communication with this terminal will fail due to collisions occurred between desired control packets and unwanted received data packets at destination. In such scenarios, conventional protocols can not address the problem efficiently, resulting in throughput and channel utilization degradation. In this paper, by using the same PHY of IEEE 802.11 and making slight changes in its MAC layer, a new MAC protocol is presented to address such problems.... 

Since DCF is the main protocol of accessing other mobile stations in ad hoc networks such as IEEE 802.11 WLANs, a self-controlling method for each station is necessary, called the backoff algorithm. An exponential backoff method has been used in WLANs and significant efforts have been made to analyze its throughput and other important properties such as delay and jitter. In this article, we propose a new backoff algorithm and model it with a discrete-time Markov chain; measuring its saturation throughput under several conditions and several set of parameters which are to be adjusted according to the network condition, with the aim of approaching maximum throughput when stations are... 

Hidden-terminal is one of the main problems in ad hoc wireless networks. In addition, there are scenarios where the desired destination is located in the range of other transmitters, so that the efforts on setting up communication with this terminal will fail due to collisions that may occur between transmitted control frames and undesired received control and data frames. This phenomenon becomes a bottleneck when most of data transmissions experience packet fragmentation. In such scenarios, the desired destination becomes unreachable during the data transfer of neighboring nodes. Using the same PHY of IEEE 802.11 and making slight modifications in its MAC, a new medium access control scheme... 

Optical Code Division Multiple Access has recently received considerable attention in wireless infrared communication. Previously introduced algorithms for wireless indoor infrared communication such as Advanced Infrared and IEEE 802.11 infrared standard use specific media access control (MAC) layer algorithms to coordinate transmission of multiple users. In this paper, we compare the multiple access performance of OCDMA with that of these algorithms and demonstrate the relative strengths and weaknesses of each algorithm. It is demonstrated that when MAC delay is an important issue, OCDMA provides a much better performance. Furthermore, OCDMA requires no coordination between users as they... 

This paper presents the most frequently used maintenance concerns and challenges in distribution utilities of Iran. A questionnaire is devised and distributed among the maintenance experts in more than 30 distribution utilities all over Iran and their responses have been taken under consideration in this paper. The aim is to get the most out of the successful maintenance experiences within the utilities, to find the solutions on the current common challenges on the distribution system maintenance policies, and eventually to enlighten the way on the transition to the more efficient maintenance approaches such as reliability-centered maintenance (RCM) in distribution systems  

Smart grids are envisioned to support large penetrations of electrical vehicles driven by economical and environmental signals. Nevertheless, distribution system operators are becoming concerned about distribution congestion that may occur in the network with multiple domestic plug-in hybrid electric vehicles (PHEVs) charging. Therefore, investigating the impacts of high PHEV penetration levels on the performance of distribution networks seems to be essential for system operators and planners. Doing so, in this paper, PHEV characteristics are precisely extracted from valid published reports and surveys. Accordingly, a comprehensive model for investigating the impacts of different PHEV... 

This paper presents the most frequently used maintenance concerns and challenges in distribution utilities of Iran. A questionnaire is devised and distributed among the maintenance experts in more than 30 distribution utilities all over Iran and their responses have been taken under consideration in this paper. The aim is to get the most out of the successful maintenance experiences within the utilities, to find the solutions on the current common challenges on the distribution system maintenance policies, and eventually to enlighten the way on the transition to the more efficient maintenance approaches such as reliability-centered maintenance (RCM) in distribution systems  

In this paper, we evaluate the effect of power randomization on the saturation throughput of a WLAN comprised of four classes of users, corresponding to four access categories (ACs) of IEEE 802.11e EDCA. To this end, we consider a specific number of power levels for all users. By some simplifications, we find the probability distributions for the power levels at each class in order to optimize the saturation throughput of a specific class. We evaluate the effect of such optimization onto the saturation throughput of other ACs as well as the saturation throughput of the whole network. Finally, we present some numerical results to show the effect of our optimization in different conditions  

The study presented in this paper investigated online data loss in a substation automation system (SAS) under network faults or failures. Online data loss refers to the amount of data that become inaccessible when a failure occurs in the SAS. It is a mathematical index related to the network's topology and architecture, and the calculation of which requires knowledge of the physical characteristics of SAS elements. The elements that record data were identified, and then the online data lost due to failures in those elements were determined. Also, as a case study, a typical SAS was examined under various states of failure, and the online data loss occurring under each scenarios was calculated... 

In this paper, we propose a data offloading algorithm in a network comprised of a macro base station and a few number of WiFi access points with overlapped coverage areas. The main goal of our algorithm is how to assign offloaded mobile stations (MSs) to access points (APs). Our approach in proposing the algorithm is based on mapping the problem onto finding a suitable matching algorithm, in order to minimize the average delay of the offloaded packets as one of the main QoS parameters on the one hand and to maximize the utility of the APs on the other hand. The utility of each AP is considered to be a combination of monetary benefit due to offloading service and the cost due to extra energy... 

The performance of OFDM-based Wireless Local Area Networks (WLANs) is investigated by employing different smart antenna techniques at the receiver. The use of multiple antennas at the Access Point (AP) receiver in IEEE802.11a standard-compliant Single Input Multiple Output (SIMO) configuration, improves the physical layer performance in different channel scenarios and interference that may arise from other stations sharing the same frequency band. For this purpose, a comparative study of smart antenna architectures for IEEE802.11a WLAN system using pre-FFT and post-FFT array processing techniques is presented. Simulations are performed on a new model for IEEE802.11a system using a...