Sharif Digital Repository

Lithium has two stable isotopes naturally including 6Li at 7.5% and 7Li at 92.5% relative abundance. In spite of the similarities of lithium isotopes in common chemical reactions, they have some completely distinctive behaviors in nuclear reactions. 6Li has considerable neutron cross section capturing in thermal neutron range about 945 barns while this feature for 7Li is insignificant about 0.037 barns. This difference makes them to play different roles in nuclear uses. 7LiOH is applied for pH adjustment of coolant in light water reactors. 6Li is not only used as a shielding material against thermal neutrons, but also is known as a source of tritium in the blanket of fusion reactors which... 

Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation... 

The most abundant source of deuterium, of course, is natural water. Other potential natural sources are natural gas and petroleum. Of these, natural water is by far the most significant. Until 1943, all the heavy water produced commercially was made by electrolysis. The largest single producer of heavy water was the Norsk Hydro Company, which operated the world's largest electrolytic hydrogen plant at Rjukan, Norway. In a detailed laboratory investigation of the effect of cell variables on the deuterium separation factor in electrolysis of water, Brun and co-workers [B13] have found that a: depends on the cathode material, electrolyte composition, and cell temperature, generally as... 

Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in... 

Different catalysts have been proposed for CO oxidation reaction and still many researches are performed to obtain a catalyst with high activity and stability. In this study, MOFs of CuBTC, MIL-101(Cr), and NH2-MIL-101(Cr) and active metal of Pd have been selected and their performances have been investigated in CO oxidation reaction. MOFs have been synthesized by hydrothermal method. Pd loading has been performed by impregnation method in various pH and in aqeous palladium nitrate solution and palladium nitrate solution in nitric acid. To reveal the effect of the nature of noble metal, activity of 1% Pt/MIL has been investigated. Amine-functionalized MIL-101(Cr) has been synthesized by... 

Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride... 

One of the challenging issues in Iran's nuclear talks and Group 5+1 countries is the amount of Iran's enrichment capacity and the number of centrifuges needed to meet this demand. In this regard, Iran has recently announced that the basis for determining its enrichment capacity is the supply of fuel for the Bushehr power plant.Modeling and optimizing of gas centrifuge cascade is one of the most important problems in fuel cycle and isotope separation fields. To achieve this goal it is needed to comprehend of single centrifuge operation. Knowing the effectofsingle centrifuge parameters, it is easy to design a desired cascade. Minimizing the number of machines in the cascade is an anticipated... 

Lithium has two stable isotopes, 6Li and 7Li. Abundance of these isotopes are 7.53% and 92.43% respectively. Each isotope has an important role in nuclear industry. For example, 6Li compounds is used in production of tritium in nuclear fusion reactors coated with DT fuel and as fuel in nuclear fusion reactors that operate with laser inertial confinement method applied. 7LiOH is used to adjust the pH of the fluid coolant in light water reactors and also in Breeding Reactors. Lithium isotope separation in different ways so far been brought into operation. The other aspect to this work, it can be both continuous and batch for action. Lithium isotopes for the first time by electrolysis using... 

In the nuclear industry, gas centrifuges are considered of high importance for the purpose of uranium enrichment. Today, with advances in science and technology, the use of gas centrifuges for separating isotopes other than uranium, is so common. With respect to the use of conventional methods such as Pancake equation in calculating the velocity profile in centrifuges, it is needed that A^2=(MV^2)/2RT≫1 (M: Feed molecular weight; V: Peripheral speed of centrifuge; T: Mean temperature of feed; R: The universal constant of gases). While the molecular weight of the feed mixture gets lower, the A2 parameter gets closer to one. So, other methods for modeling the behavior of the gas in the... 

Kinetics and mechanism of 4,4-dicyano-5-ethyl-1,5-heptadiene rearrangement reaction, a pericyclic type reaction, were studied with ab initio calculations in gas and solution phases. This reaction is one of the cope rearrangement in which secondary kinetic isotope effect is observed. Theoretical study on these reactions showed that probability of radicalic mechanism is inconsiderable and reaction proceeds through out a concerted mechanism with cyclic transition state. Isotope effect was studied by replacement of H1, H2 and H4,H5 with deuterium. The isotope effect data confirmed the concerted mechanism. Solvent effects on this reaction were studied by CPCM model. Solvation energies at... 

The purpose of this study was to investigate the capability of Isotopic Ratio Mass Spectrometry (IRMS) in the detection of four common natural plant frauds in saffron, namely Marigold flower, Safflower, Rubia and Saffron Style. For this purpose, first natural saffron isotopes were analyzed and used to investigate fingerprints of carbon-13 and nitrogen-15 isotopes by Elemental Analyzer Isotopic Ratio Mass Spectrometry (EA-IRMS) and carbon-13 isotopic ratio of saffron components by Gas Chromatography Isotopic Ratio Mass Spectrometry (GC-C-IRMS). Then, according to the isotopic behavior of the original saffron, they were sampled to form a mixture of saffron that is representative of the...