Sharif Digital Repository

In this study, the effect of hydrophobicity of environmentally responsive surface-modified silica nanoparticles on the stability and surface activity of the nanoparticles is examined. To this end, n-propyl, n-hexyl, or n-octyl chains and methoxy poly(ethylene glycol) chains at various quantities were coated covalently on the surface of silica nanoparticles to regulate the hydrophobicity of the responsive nanoparticles. Various experimental tools such as stability analysis, interfacial-tension and contact-angle measurements, and emulsion formation were performed to investigate the effect of hydrophobicity. It became evident that the presence of the hydrophobic agents influences considerably... 

In upstream oil industry, microorganisms arise some opportunities and challenges. They can increase oil recovery through microbial enhanced oil recovery (MEOR) mechanisms, or they can increase production costs and risks through reservoir souring process due to H2S gas production. MEOR is mostly known by bioproducts such as biosurfactant or processes such as bioclogging or biodegradation. On the other hand, when it comes to treatment of reservoir souring, the only objective is to inhibit reservoir souring. These perceptions are mainly because decision makers are not aware of the effect microorganisms’ cell can individually have on the wettability. In this work, we study the individual effect... 

One of the key open questions in the area of low or controlled salinity water flooding (LSWF or CSWF) is how the observed oil recovery at macro-scale (e.g. Darcy or core-scale) can the explained and what underlying microscopic mechanisms drive it. Thus far, the micromodel investigation of LSWF has been limited to sandstones, remaining challenging to apply to carbonates. In this paper we aim to i) extend the capability to fabricate a novel calcite micromodel using Iceland spar calcite crystal, ii) investigate the pore-scale mechanisms leading to oil recovery from carbonates. A target crude oil-brine-rock (COBR) system was first selected. To screen potential brines which can produce... 

The efficiency of low salinity waterflooding, particularly during tertiary mode injection, is highly controlled by in situ mixing between the stagnant regions holding high salinity water (HSW) and the flowing regions containing low salinity water (LSW) because it impacts directly the electrokinetics of wettability alteration and the time scale of the low salinity effect. This study aims to address the effects of oil polarity and charged rock surfaces on the time scale of mixing and transport under two-phase flow conditions. A systematic series of micromodel experiments were performed. The micromodels were first saturated with high salinity formation brine and oil (both model and crude oil);... 

The low salinity water injection has become one of the most important studies in the oil industry for improving oil recovery compared to conventional seawater injection. Thus, extensive studies have been conducted in carbonate and sandstone reservoirs to investigate how the physical properties of rocks and the chemical composition of fluids influence low salinity effect, while, the carbonate reservoir rocks requires more investigation of the effect of molecular and/or ionic interactions. In this experimental work, the effectiveness of various water flooding schemes in carbonate reservoir rock samples is investigated. In this regard, the oil recovery potential of seawater (SW), reservoir... 

Engineered water (EW) flooding is one of the enhanced oil recovery (EOR) techniques in carbonate reservoirs. In this method, the wettability of reservoir rock is altered by controlling the amount of various ions in the injected brine. The thermodynamics of wettability is related to the surface interactions and stability of water film on a rock surface. It can be identified by calculating disjoining pressure isotherms. In this study, core flooding tests, contact angle and zeta potential measurements along with the disjoining pressure isotherm calculation by the DLVO theory were used to investigate the wettability alteration of dolomite rock. Four brines include reservoir formation water... 

Foam flooding has been applied as a promising method in enhanced oil recovery to obviate the challenges of gas flooding such as fingering, channeling and overriding. However, long-term foam stability is crucial for mobility control. In this work, the effective mechanisms on foam stability in the presence of CaCO3 nanoparticles were assessed both theoretically and experimentally. The static and dynamic behaviors of cationic surfactant (HTAB) foam in the presence of CaCO3 nanoparticles with different hydrophobicity were evaluated. The CaCO3 nanoparticles were treated with a series of long-chain fatty acids to generate a range of wettability. Afterward, the underlying mechanisms were revealed... 

The condensation process is of great importance in many heat transfer devices in which a large amount of energy must be transferred. Furthermore, condensation is a crucial part of energy conversion and affects the energy efficiency of thermal desalination plants and solar stills. During the condensation process in solar stills, an essential part of the energy is transferred through the condensation surface to produce fresh water. Therefore, the condensation surface plays a significant role in the working efficiency of solar stills. The wettability of the condensation surface influences the condensation mechanism, which, in turn, affects the efficiency of solar stills. This study aims to... 

In the present study, the effect of two different kinds of surfactants namely conventional (Sodium dodecyl benzene sulfonate (SDBS)) and ionic liquid (IL)-based surfactants are investigated on the tertiary oil recovery using relative permeability concept. In this way, besides the Amott wettability index measurement, unsteady state core flooding tests are performed to not only find the effect of surfactant injection on tertiary oil recovery, but also to investigate their effects on relative permeability of carbonate rocks. In addition, for more reliable conclusions regarding the possible mechanisms, interfacial tension (IFT), compatibility and emulsification tests are carried out as a... 

Two main reservoir mechanisms that impact oil recovery factors are wettability alteration and interfacial tension (IFT) change. In this study, these two key mechanisms are evaluated experimentally for samples from the Asmari (carbonate) oil reservoir utilizing silica nanoparticles in the presence of low-salinity water. The nanofluid, rock formation and crude oil samples were prepared meticulously to ensure meaningful experimental could be conducted over a range of low-salinity conditions. The results show that across the range of salinities studied, the absolute value of zeta potential of nanofluids decreases with increasing total dissolved solids (TDS) in the water treated with silica... 

In this paper, the effect of silica nanoparticles on oil production due to the spontaneous imbibition of brine into oil-wet sandstones has been studied. The imbibed fluids were NaCl 3 wt. % solutions containing various concentrations of nanoparticles and the recovered oil for each solution was compared. The results revealed that nanoparticles yielded more oil recovery. Nanofluid was used after brine imbibition, and the oil recovery increased from 17.8% to 40% while in the case of using the same nanofluid as the first imbibed fluid the oil recovery was 53%. Also, the results indicated that the oil recovery depends on nanoparticle concentrations. © 2019, © 2019 Taylor & Francis Group, LLC  

The efficiency of water flooding methods is known to improve by applying ion-tuned water injection. Although there is a consensus that such improvement happens through reversing reservoir wettability characteristics to more water-wet state, the true impact of ions is still ambiguous among contradictory debates. The well-known molecular dynamics (MD) simulation techniques would shed light on such ambiguities to gain deep atomic-scale understanding of the process. Results from MD simulations show that the presence of Na+ and Cl¯ ions leads to the formation of an electrical double layer in adjacency of calcite surface while Mg2+ ions dominantly make complexes with hydrocarbons throughout the... 

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Application of nanoparticles for wettability alteration offers a practical approach to resolve some surface-related problems encountered in the nowadays technological process. Examples are underground/subsurface engineering implications, including the enhanced oil recovery from the oil-wet carbonate reservoirs. However, the common wettability evaluating techniques such as contact angle and flotation cannot be representative of the dynamic phenomena occurring at the pore scale and hence are unable to give accurate information about the process. Therefore, in the present work, the electrokinetic evaluations are utilized to explore the wettability alteration of initially oil-wet carbonate rock... 

Wettability alteration of rock surfaces toward gas wetting have been recognized as a practical approach for maximizing the production from the gas condensate reservoirs. Most of the reported work in this area applied the so called sessile drop contact angle measurement technique to examine the change in wetting state of a surface. However, the size-dependent wetting behavior of drop which could affect the exact determination of wettability and wettability changes was not well discussed in the previous studies. Therefore, in this work, the size dependency of contact angle for four different liquid-solid-gas systems; i.e., water-calcite-air, water-treated calcite-air (nanofluid treated... 

Despite previous researches on ion-engineered waterflooding (IEWF), its underlying mechanisms are not fully understood, particularly in presence of additives, like surfactants. This paper concerned with the contribution of Ca 2+ , Mg 2+ , SO 4 2- and Na + into altering wettability of oil-wet carbonate minerals towards water preferred state. As a mechanistic study, an experiment workflow was conducted to probe the impact of ions' concentrations in SW, either with or without sodium dodecylbenzene sulfonate (SDBS) which is an anionic surfactant. At first, contact angle (CA) measurement was carried out to evaluate the degree of wettability reversal upon treating the oil-aged calcite slabs with... 

The bacterial strain MJ01 was isolated from stock tank water of one of the Iranian south oil field production facilities. The 16S rRNA gene of isolate, MJ01, showed 99% similarity to Bacillus subtilis. The results revealed that biosurfactant produced by this strain was lipopeptide-like surfactin based on FTIR analysis. Critical micelle concentration of produced surfactin in distilled water was 0.06 g/l. Wettability study showed that at zero salinity surfactin can change original oil-wet state to water-wet state, but in seawater salinity it cannot modify the wettability significantly. To utilize this biosurfactant in ex situ MEOR process, economical and reservoir engineering technical... 

In this work, application of silica nanoparticles for wettability alteration of initially oil-wet calcite was investigated through analysis of surface forces and DLVO theory. Doing so, the wettability and zeta potential of calcite surfaces were measured through the sessile drop method and an in-house experimental setup, respectively. Primary evaluation indicated that incorporating DLVO terms in the Frumkin-Derjaguin model was not sufficient to describe the wettability in an oil-wet calcite/nanofluid system. Sensitivity analysis showed that calculating the double-layer interaction using constant potential-constant potential boundaries along with structural hydrophobic forces (non-DLVO... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude...