Sharif Digital Repository

In this research, mathematical modelling of an anaerobic hybrid bioreactor for effluent treatment of a Poly-Ethylene Terephthalate (PET) unit in a petrochemical complex was performed. The developed model included a combination of a biofilm model for describing the substrate kinetics; a fluidized bed model for determination of species profiles along the reactor length and a bioreactor model for particle distribution inside the reactor. The reactions performed in the bioreactor included; i) the polymers hydrolysis; ii) fermentation of the resulting monomers; iii) the volatile fatty acids fermentation to Acetate and Hydrogen and iv) the Methane formation as the final product. The reactor was... 

The objective of this study is the investigation of formaldehyde degradation in a bioreactor with pumice stone as a support. The reactor was tested at different synthetic wastewater concentrations with total COD of 500, 1000 and 1500 mgL, respectively, at 24 h hydraulic retention time. The effect of feed composition was tested by changing the COD TCOD FA ratio in order to analyze the impact of formaldehyde concentration. The average formaldehyde and COD removal efficiencies obtained in the reactor were 97.1% and 88%, respectively. The maximum COD and formaldehyde removal efficiencies occurred at the COD TCOD F of 41 at COD T=1000mgL. The effect of toxic shock on reactor performance was... 

High water consumption and water scarcity make industrial wastewater reuse necessary, especially in those industries characterized by polluted effluents such as welding electrode manufacturing industries. The present paper investigates the coupling of coagulation-flocculation with nanofiltration (NF) to recycle water and reuse it in the process. First, the effect of different concentrations of a mixture of alum (Al2(SO4) 3.18H2O) and ferric chloride (FeCl3) on the pretreatment process was closely studied. Then the NF process was applied for complementary treatment. The NF results show that, by increasing both flow rate and transmembrane pressure (TMP), permeate flux is increased. The NF... 

Abstract This article studies a submerged membrane electro-bioreactor (SMEBR), an integrated system embracing biological treatment, electrical coagulation, and membrane filtration, all in one individual reactor, by applying an alternating electric field to a membrane bioreactor (MBR). The alternating electric field has been applied with current densities ranging from 5 to 23 A/m2 under eight different electrical exposure modes. The results indicate that under the optimum condition with a current density of 12.5 A/m2 and an exposure mode of (415 s OFF-185 s ON), the COD and phosphate removals would be respectively 4% and 43% more compared to an unmodified MBR system. Also at the same current... 

Photocatalysts that are used for waste water treatment are often suspended in the waste water during processing and then must be removed from the water after treatment. To reduce the post-degradation expenses and time, separation is facilitated by an immobilization process. The effect of immobilized TiO2 geometries on the photocatalytic behavior of the photocatalyst is investigated in this work. Powder, fiber, film, and network-shaped TiO2 nanocatalysts were produced by using different templates. The cellulose fiber and ceramic templates were used as substrates for fiber and film/network geometry production. The products were characterized by x-ray diffraction (XRD),... 

The objective of this study was to construct a novel model to be applied in a general manner to simulate microbial electrochemical cells (MXCs); for both microbial fuel cell (MFC) and microbial electrolysis cell (MEC). The liquid bulk was modeled based on the organic matters degradation to acetate via the anaerobic digestion process. Biofilm simulation was established based upon one-dimensional distribution and the dynamical electron transfer was completed by means of the conduction-based mechanism. We, for the first time, introduced biofilm local potential modeling for MEC simulation with general and simplified linear boundary conditions. The MFC-related part of the model was evaluated... 

Microbial electrolysis cells (MECs) are bioelectrochemical reactors in which chemical energy stored in organic compounds are converted to hydrogen through biocatalytic oxidation by microorganisms. The performance of MECs is highly affected by microbial communities that are impartible parts of this technology. A better understanding of microbial interactions and competitions mechanisms, has aided the comprehension of ideas and guidelines for cost effective commercial scales design. In this study, a comprehensive review of current knowledge in the microbial characterization, enrichment, and evaluation of effective parameters of microbial community in microbial electrolysis cells for typical... 

Side weirs are hydraulic control structures widely used in irrigation, drainage networks and waste water treatment plants. These structures can be used for adjusting and diverting of flow with minimum energy loss. In spite of many studies were carried out on rectangular side weirs, the studies on oblique and labyrinth side weirs are scarce. In this study, based on the experimental data from more than 210 laboratory tests and through using the multivariable nonlinear partial least square (PLS) method, two nonlinear equations are presented for discharge coefficient CM of triangular labyrinth side weirs with one and two cycles. The obtained empirical equations relating CM with the relevant... 

In this work, the adsorption of benzoic acid (BA) over metal organic framework of chromium-benzenedicarboxylates (MIL-101) is reported for the first time. The influences of pH, contact time, initial concentration, and temperature of BA solution on the adsorption behavior were investigated. The Langmuir adsorption isotherm was adequate to represent the experimental data (R2 > 0.99) and the adsorption kinetics was well-represented by a pseudo-second order kinetic model (R2 > 0.96). The zeta potential of MIL-101 decreased with increasing pH confirming the importance of electrostatic interactions between MIL-101 and BA as well as the importance of the large pore volume (1.32 m3/g) and large... 

In this paper, the effect of ozone on membrane fouling of membrane bioreactor (MBR) systems was investigated. Sludge specification such as soluble microbial product (SMP), extracellular polymeric substance (EPS), viscosity, particle size distribution (PSD), microscopic observations and sludge volume index (SVI) in presence of ozone were determined. Further, EPS, Fourier-transform infrared (FTIR) analysis, excitation-emission matrix (EEM) fluorescence spectroscopy, and gel permission chromatography (GPC) are considered to determine cake layer characteristics. The results indicated COD removal did not show significant difference with ozonation. Ozone also increases the particle size and... 

Produced water (PW), water extracted along with oil, can cause important environmental challenges due to its high volume and salinity and is considered a key factor in the economic exploitation of oil fields. Therefore, making use of a cost-effective integrated system of wastewater treatment is a fundamental requirement in oil and gas industries. In this paper, the integrated PW treatment system is presented using superstructure-based mathematical optimisation methodology which is aimed at minimising the total annual cost. Two distinct scenarios of injection and reuse in industrial scale are considered to propose an efficient and optimal integrated system. The results show that, despite the... 

In this study, novel chitosan/poly(vinyl alcohol) (PVA)/SiO2 nanocomposite ENMs were prepared to improve the mechanical strength and permeation properties of ENMs. The effect of various concentrations of SiO2 in the spinning solution (0, 0.5, 1.0 and 2.0 wt %) on the morphology, fiber diameter, porosity, thermomechanical properties, and permeability of the synthesized membranes was investigated. The prepared affinity membranes were utilized for the removal of dye from colored wastewater. Incorporating SiO2, as a reinforcing agent, was found to increase the compaction resistance of the nanocomposite ENMs. With the addition of 0.5 wt % of SiO2, the Young's modulus of the prepared membranes... 

Various urban, industrial, and agricultural pollutions discharge more than river self-purification potential damages river ecosystem and increases water treatment costs. As different decision-makers and stakeholders are involved in the water quality management in river systems, a new bankruptcy form of the game theory is used to resolve the existing conflict of interests related to waste load allocation in downstream river. The river restoration potential can allocate to the conflicting parties with respect to their claims, by using bankruptcy solution methods. In this research, dischargeable pollution loads to Karun River are determined by pollution sources in various scenarios using... 

Phytoremediation has been applied for treating an extensive range of environmental contaminants such as anti-diabetic drug metformin which is increasingly found as environmental contaminant. These contaminants are released to the environment via human and veterinary medicine and pharmaceutical industries. In this study, native plant capabilities for uptake of metformin from wastewater were investigated. Moreover, uptake rate of metformin was studied in two different concentrations of 20 and 50 mg l−1 metformin solution by Amaranthus retroflexus, Ricinus communis, Brassica napus, Celosia cristata, Helianthus annuus and Phragmites australis. The results showed that after exposing to 20 mg l−1... 

In this paper simulation results for integration of CO2 pre-combustion capture by steam methane reforming (SMR) in membrane reactors (MR) with natural gas fired combined cycle (NGCC) power plants are presented. The integrated combined cycle was simulated by GTPRO (Thermoflow) simulator along with the results from simulation of membrane reactor for SMR process developed in this work. The results show that the overall efficiency of the integrated combined cycles decreased due to the energy required for SMR process. On the other hand, by integration of MR in combined cycles, emissions of CO2 to the atmosphere can be avoided. © 2009 Elsevier Ltd. All rights reserved  

This paper reports on the application of low-grade sensible waste heat (liquid phase) driven multi-effect distillation (MED) technology to exploit waste heat sources that are generally abundant in the petrochemical industries especially, those located close to the Persian Gulf's coastline. For this purpose, a techno-economic feasibility study by considering local capital and operating costs for a selected petrochemical plant has been conducted. In this study, a sensible waste heat stream (practically at 80 °C in the liquid phase), which is actively cooled by the cooling process of the plant, is considered as the heat source for the proposed desalination process. This process can recover... 

One of the main issues of wastewater treatment is the silica deposition in steam turbines. Evaporation of silica with the steam in adequate concentration is one of the main sources of scale formation in steam turbines. In this study, the authors introduce the utilization of a genetic-based approach—gene expression programming (GEP)—for solubility prognostication of the silica in superheated steam of boilers with respect to water silica content and pressure. The result of GEP mathematical approach is a new algebraic formula to achieve our goals. Developed model predicts the silica solubility in the range of 0.8–22.1 MPa and 1–500 mg/kg for pressure and boiler water silica content,... 

Hexagonal core–shell SiO2[–MOYI]Cl–]Ag nanoframeworks were synthesized via surface modification of hexagonal silica nanoparticles prepared from perlite (EP) as a cheap and abundant raw material. The prepared samples were well characterized by X-ray diffraction powder (XRD), energy dispersive X-ray (EDX), diffuse reflectance spectroscopy (DRS), Brunauer–Emmett–Teller (BET) specific surface area analysis, fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The XRD patterns confirmed that Ag and AgCl crystalline phases were successfully loaded on the surface. The TEM images were also implied that the... 

Zirconium based metal-organic frameworks (Zr-MOFs) are promising candidates for photocatalytic wastewater treatment due to their excellent properties such as high chemical and thermal stability and high photodegradation ability. Herein, we report a novel porous TiO2/ZrO2 photocatalyst derived from UiO-66 and Titania hybrids. UiO-66 nanoparticles was synthesized through solvothermal method and utilized as catalyst support to grow TiO2 particles on its surface. The prepared Titania/MOF nanocomposite was calcined to obtain porous TiO2/ZrO2 photocatalyst for degradation of organic pollutants from colored wastewater under LED visible light. The prepared materials were fully characterized with...