Sharif Digital Repository

This study proposes a mathematical model to evaluate the impact of oxygen carriers and scaffold geometry on oxygen distribution and cell growth in a 3D cardiac construct using computational fluid dynamics (CFD). Flow equations, oxygen balance equation and cell balance equation were solved using special initial and boundary conditions. The modeling results revealed that 55% increase in cardiac cell density occurred by using 6.4% perfluorocarbon oxygen carrier (PFC) compared to pure culture medium without PFC supplementation. Moreover, the effects of the scaffold geometry on cell density were examined by changing the channel numbers and the construct length. A 30% increase in the average cells... 

In this study, a dielectrophoresis field-flow fractionation device was analyzed using a numerical simulation method and the behaviors of a set of different cells were investigated. By reducing the alternating current frequency of the electrodes from the value used in the original setup configuration and increasing the number of exit channels, total discrimination in cell trajectories and subsequent separation of four cell types were achieved. Cells were differentiated based on their size and dielectric response that are represented in their real part of Clausius–Mossotti factor at different frequencies. A number of novel designs were also proposed based on the original setup configuration.... 

In this paper, a constitutive and micromechanical model for prediction of rate-dependent behavior of connective tissues (CTs) is presented. Connective tissues are considered as nonlinear viscoelastic material. The rate-dependent behavior of CTs is incorporated into model using the well-known quasi-linear viscoelasticity (QLV) theory. A planar wavy representative volume element (RVE) is considered based on the tissue microstructure histological evidences. The presented model parameters are identified based on the available experiments in the literature. The presented constitutive model introduced to ABAQUS by means of UMAT subroutine. Results show that, monotonic uniaxial test predictions of... 

The heat transfer characteristics and entropy generation rate of hybrid graphene-magnetite nanofluids under forced laminar flow that subjected to the permanent magnetic fields were investigated. For this purpose, a nanoscale reduced graphene oxide-Fe3O4 hybrid was synthesized by using graphene oxide, iron salts and tannic acid as the reductant and stabilizer. The thermophysical and magnetic properties of the hybrid nanofluid have been widely characterized and thermal conductivity has shown an enhancement of 11%. The experimental results indicated that the heat transfer enhancement of hybrid magnetite nanofluid compared to the case of distilled was negligible when no magnetic field was... 

Colloidal gas aphron (CGA) based fluids have recently been introduced to develop depleted hydrocarbon reservoirs due to their ability in controlling fluid losses. Bubbles size of CGAs plays an important role in pore blockage ability as the controlling mechanism in fluid invasion reduction. However, fundamental understanding of how bubble size distribution is controlled by polymer and surfactant concentrations is not well discussed in the available literature. Almost all reported experiences on CGAs sizing were conducted on single bubble behavior, and little attention has been given to the variation of bubble size distribution (BSD) of CGAs at different levels of polymer/surfactant... 

In drilling industry, barite particles settling and barite sag as a major problem can potentially impose significant operational issues. Static conditions, in which well undergoes an extended shut-in period, could occur during different drilling and completion operations such fishing operation, tripping, and logging. Despite its importance, such phenomenon is not well understood yet. To avoid issues related to barite settlement and barite sag, a good understanding of the impact of different drilling parameters on barite settlement and sag phenomenon is required. Recently, the mathematical formulation and modeling of settlement and sag processes have gained more attention. In order to better... 

This paper deals with the determination of free vibration characteristics and instability conditions of flexible spinning cylinders partially filled with fluid. Using the linearized Navier-Stokes equations for the incompressible, inviscid flow, a 2D model is developed for fluid motion at each section of the cylinder. The forces exerted on the cylinder wall as a result of the fluid motion are calculated as functions of lateral acceleration of the cylinder axis in the Laplace domain. Applying the Hamilton principle, the governing equations of flexural motion of the cylinder are derived and then combined with the equations describing the fluid forces to obtain the coupled field equations of the... 

In the present paper, the formation of an air bubble in a shear-thinning non-Newtonian fluid was investigated numerically. For modeling, an algebraic volume of fluid (VOF) solver of OpenFOAM ® was improved by applying a Laplacian filter and was evaluated using the experimental results from the literature. The enhanced solver could compute the surface tension force more accurately, and it was important especially at low capillary and Bond numbers due to the dominance of surface tension force relative to the other forces. The adiabatic bubble growth was simulated in an axisymmetric domain for Bo = 0.05 , 0.1 , 0.5 and Ca = 10 - 1, 10 - 2, 10 - 3, 10 - 4, and the bubble detachment time and... 

The modified Hummer technique was used in the preparation of graphene oxide (GO) nanosheets, and then SiO 2 decorated GO [GO(SiO 2 )] nanosheets were synthesized via the sol–gel method. Then, ultrahigh-molecular-weight polyethylene (UHMWPE) nanocomposites loaded with 0.5, 1, 1.5, and 2 wt % of GO(SiO 2 ) were prepared using magnesium ethoxide/GO(SiO 2 )-supported Ziegler–Natta catalysts via the in situ polymerization. Morphological study of the prepared polymer powders was assessed using field-emission scanning electron microscopy, which showed that GO(SiO 2 ) nanohybrids have been uniformly dispersed and distributed into the UHMWPE matrix. Also, the neat UHMWPE and its nanocomposites were... 

The present study aims to investigate the impact of nanoparticle migration due to Brownian motion and thermophoresis on Ag-MgO/Water hybrid nanofluid natural convection. An enclosure with sinusoidal wavy walls is considered for this investigation; right and cold walls of this enclosure are in constant temperature while the upper and bottom walls are insulated. This simulation follows Buongiorno's mathematical model; Brownian and thermophoresis diffusion of Ag occurs in MgO-Water nanofluid while the diffusion of MgO happens in Ag-water nanofluid. The result indicates that Nu number increments up to 11% by increasing thermophoresis diffusion for both nanoparticles. Also, increasing Brownian... 

A three-dimensional multi-component transport model in a two-phase oil-water system was developed. The model includes separated terms to account for the dispersion, convection, injection, growth and death of microbes, and accumulation. For the first time, effects of both wettability alteration of reservoir rock from oil wet to water wet and reduction in interfacial tension (IFT) simultaneously on relative permeability and capillary pressure curves were included in a MEOR simulation model. Transport equations were considered for the bacteria, nutrients, and metabolite (bio-surfactant) in the matrix, reduced interfacial tension on phase trapping, surfactant and polymer adsorption, and effect... 

Simvastatin, a well-known antihyperlipidemic drug, has antibacterial activity against a broad range of bacteria, especially Staphylococcus aureus. In present study, a nanoemulsion gel-based formulation containing Simvastatin was developed for infected wound therapy. Therefore, different formulations of Simvastatin nanoemulsion were prepared. Based on droplet size, polydispersity index and zeta potential, the best nanoemulsion formulation containing Simvastatin was selected for development of nanoemulsion gel formulation of drug using carbomer 934 as gelling agent. Thermodynamic stability of Simvastatin nanoemulsion was assessed at different conditions. The in vitro antibacterial activity... 

Through the activation process of T cells, actin filaments move from the cell periphery toward the cell center. The moving filaments engage with T cell receptors and thus contribute to transportation of the signaling molecules. To study the connection between the moving actin filaments and T cell receptors, an experiment available in the literature has measured filaments flow velocity passing over a region of confined clusters of receptors. It shows that flow velocity decreases in the proximity of the receptors, and then regains its normal value after traversing the region, suggesting a dissipative friction-like connection. In this work, we develop a minimal theoretical model to re-examine... 

Overall turbine analysis requires large CPU time and computer memory, even in the present days. As a result, choosing an appropriate computational domain accompanied by a suitable boundary condition can dramatically reduce the time cost of computations. This work compares different geometries for numerical investigation of the 3D flow in the runner of a Francis turbine, and presents an optimum geometry with least computational effort and desirable numerical accuracy. The numerical results are validated with a GAMM Francis Turbine runner, which was used as a test case (GAMM workshop on 3D computation of incompressible internal flows, 1989) in which the geometry and detailed best efficiency... 

A novel sulfoxide containing bis(ether amine) monomer, 2,2'-sulfoxide- bis[4-methyl(2-trifluoromethyl)4-aminophenoxy) phenyl ether] (M2), was synthesized from the halogen displacement of 2-chloro-5-nitrobenzotrifluoride with dibenzosulfoxide (DH) in the presence of potassium carbonate, followed by catalytic reduction of bis(ether nitro) intermediate with Zinc/Ammonium chloride. A series of organic-soluble poly(ether amide)s (PA1-7) bearing sulfoxide and electronwithdrawing trifiuoromethyl group were synthesized from bis(ether amine) with various aromatic diacids (1-7) via a direct polycondensation with triphenyl phosphite and pyridine. The resulting polymers had inherent viscosities ranging... 

Cell survival during the early stages of transplantation and before new blood vessels formation is a major challenge in translational applications of 3D bioprinted tissues. Supplementing oxygen (O2) to transplanted cells via an O2 generating source such as calcium peroxide (CPO) is an attractive approach to ensure cell viability. Calcium peroxide also produces calcium hydroxide that reduces the viscosity of bioinks, which is a limiting factor for bioprinting. Therefore, adapting this solution into 3D bioprinting is of significant importance. In this study, a gelatin methacryloyl (GelMA) bioink that is optimized in terms of pH and viscosity is developed. The improved rheological properties... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

The relative vulnerability of spinal motion segments to different loading combinations remains unknown. The meta-analysis described here using the results of a validated L2-L3 nonlinear viscoelastic finite element model was designed to investigate the critical loading and its effect on the internal mechanics of the human lumbar spine. A Box-Behnken experimental design was used to design the magnitude of seven independent variables associated with loads, rotations and velocity of motion. Subsequently, an optimization method was used to find the primary and secondary variables that influence spine mechanical output related to facet forces, disc pressure, ligament forces, annulus matrix... 

Obstruction of left anterior descending artery (LAD) due to the thrombosis or atherosclerotic plaques is the leading cause of death worldwide. Targeted delivery of drugs through micro- and nanoparticles is a very promising approach for developing new strategies in clot-busting or treating restenosis. In this work, we modelled the blood flow characteristics in a patient-specific reconstructed LAD artery by the fluid–solid interaction method and based on physiological boundary conditions. Next, we provided a Lagrangian description of micro- and nanoparticles dynamics in the blood flow considering their Brownian motion and the particle–particle interactions. Our results state that the number of...