Sharif Digital Repository

We consider the application of the Finite Element Method (FEM) for numerical pressure transient analysis under conditions where no reliable analytical solution is available. Pressure transient analysis is normally based on various analytical solutions of the linear one-dimensional diffusion equation under restrictive assumptions about the formation and its boundaries. For example, the formation is either assumed isotropic or a restrictive a priori assumption is made about its heterogeneity. The wellbore storage effect is also often considered without regard to the possibility of phase redistribution. In many practical situations such restrictions are not justified and analytical solutions do... 

This study aims to improve the performance of nuclear power plants (NPPs) transients training and identification using the latest advances of error back-propagation (EBP) learning algorithm. To this end, elements of EBP, including input data, initial weights, learning rate, cost function, activation function, and weights updating procedure are investigated and an efficient neural network is developed. Usefulness of modular networks is also examined and appropriate identifiers, one for each transient, are employed. Furthermore, the effect of transient type on transient identifier performance is illustrated. Subsequently, the developed transient identifier is applied to Bushehr nuclear power... 

Transient rate decline curve analysis for constant pressure production is presented in this paper for a naturally fractured reservoir. This approach is based on exponential and constant bottom-hole pressure solution. Based on this method, when ln (flow rate) is plotted versus time, two straight lines are obtained which can be used for estimating different parameters of a naturally fractured reservoir. Parameters such as storage capacity ratio (ω), reservoir drainage area (A), reservoir shape factor (CA), fracture permeability (kf), interporosity flow parameter (λ) and the other parameters can be determined by this approach. The equations are based on a model originally presented by Warren... 

This paper presents an analysis of the effects and propagation of faults in the open-core 32-bit OpenRISC 1200 microprocessor. The analysis is based on a total of 13,000 transient faults injected into 65 parts of the CPU module in the OpenRISC 1200 core described at the RTL model. A comparison of the effects of faults on the various parts of the CPU including the pipeline's registers, the CPU component such as the register file, the control unit, and the ALU, and the data and address buses is done. It is shown that about 30%, 40% and 27% of injected faults terminated in address, data, and control errors respectively. About 28% of all injected faults resulted in failures. © 2008 IEEE  

Interpretation of temperature logs has been done successfully in wells to identify water or gas entries location, detect casing leaks, and evaluate cement placement. This paper shows how knowledge of the Joule-Thomson cooling effect and frictional heating effect can be applied for well test interpretation. Many analysts rely on pressure derivative curve to diagnose wellbore storage period and radial flow regime on pressure transient data. However, there are field examples that flow regimes can't be accurately determined. During transient tests, both pressure and temperature are changed depending on downhole flow rate. In gas producing wells, Joule-Thomson cooling and frictional heating... 

This paper presents comparison among methods of determination of the characteristic polynomial coefficients. First, the resultant systems from the methods are compared based on frequency criteria such as the closed loop bandwidth, gain and phase margins. Then the step responses of the resultant systems are compared on the basis of the transient behavior criteria including overshoot, rise time, settling time and error (via IAE, ITAE, ISE and ITSE integral indices). Also relative stability of the systems is compared together. Finally the best choices in regards to the above diverse criteria are presented. COPYRIGHT © ENFORMATIKA  

Advanced static VAR compensators (ASVCs) are used to improve the transient stability of electric power systems. In this paper we present a new control strategy, which has superior performances compared to the conventional control techniques for these systems. The proposed method utilizes a novel current reference based on the transient energy function (TEF) approach. It also includes the voltage limits in the optimizing process using the Lyapunov theory and linear programming. In addition, it is optimized considering the permissible system conditions. A continuous control of the reactive power flow is also achieved. The proposed ASVC is modeled in single-machine and multimachine systems. In... 

Variable reluctance resolver (VR-Resolver) is a robust electromagnetic sensor that provides position information for closed-loop control systems of permanent magnet synchronous motors (PMSMs). For specific motion control applications, an outer rotor structure is presented for the VR-Resolver in this article with a nonoverlapping tooth-coil windings configuration to simplify the manufacturing process. The study on the structure of the proposed position sensor is carried out, followed by the description of the working principle. The presented outer rotor VR-Resolver is simulated and its performance is investigated in detail with the aid of transient finite-element analysis (TFEA). Sensitivity... 

Aging response of transient liquid phase Nb bearing wrought IN718 nickel base superalloy is studied. The aging behaviour of the joint is influenced by low Nb+Al+Ti content of isothermal solidification zone (ISZ) and formation of Nb-Cr-Mo based boride precipitates in diffusion affected zone (DAZ). It was shown that applying a post-bond heat treatment which was able to eliminate the diffusion induced boride precipitates in DAZ and increase the Nb+Al+Ti content of the ISZ improved the aging response and shear strength of the joint  

This study introduces a novel identification method for recognition of nuclear power plants (NPPs) transients by combining the autoregressive integrated moving-average (ARIMA) model and the neural network with error back-propagation (EBP) learning algorithm. The proposed method consists of three steps. First, an EBP based identifier is adopted to distinguish the plant normal states from the faulty ones. In the second step, ARIMA models use integrated (I) process to convert non-stationary data of the selected variables into stationary ones. Subsequently, ARIMA processes, including autoregressive (AR), moving-average (MA), or autoregressive moving-average (ARMA) are used to forecast time... 

Transient liquid phase (TLP) diffusion bonding is a preferred joining/repairing technique for nickel based superalloy. In this research, TLP bonding process carried out according to the standard heat treatment cycles for wrought IN718 base material in order to permit the combining of these two thermal operations. The results showed that the standard solution treatments at 1000 and 1050. °C for 60. min can result in completion of isothermal solidification in IN718/Ni-Cr-Fe-Si-B/IN718 system producing an entirely intermetallic free joint centerline. Two distinct microstructural zones were formed in the bonding affected zone: isothermal solidification zone (ISZ) which consists of single phase... 

Abstract This paper proposes a bumpless transfer method to overcome the problem of switching jumps in a scheduled robust model predictive control approach. A scheduled robust model predictive controller implements a set of local robust model predictive controllers based on an on-line switching strategy. This method could enlarge the domain of attraction efficiently but the transient response might be hampered by spikes appearing at the moment of switching between adjacent local controllers. The proposed algorithm could enhance the transient response by implementing some intermediate controllers augmented to the main control scheme to solve the problem without needing more computation. The... 

This paper deals with development and qualification of a nodalization for modeling of the PSB-VVER integral test facility (ITF) by RELAP5/MOD3.2 code and prediction of its primary and secondary systems behaviors at steady state and transient conditions. The PSB-VVER is a full-height, 1/300 volume and power scale representation of a VVER-1000 NPP. A RELAP5 nodalization has been developed for PSB-VVER modeling and a nodalization qualification process has been applied for the developed nodalization at steady state and transient levels and a qualified nodalization has been proposed for modeling of the PSB ITF. The 11% small-break loss-of-coolant-accident (SBLOCA), i.e. rupture of one of the... 

A wind turbine transformer internal resonance, excited by high frequency transients i.e.; under its energization through a short length of cable, is considered to obtain a proper transformer design method. A multi-objective optimum design method (using TOC and inrush current energy factor as objective functions) is employed and the optimal Pareto solutions for this design are derived. Selected design from the Pareto optimal solutions are then modeled using the lumped RLC ladder network, valid over a wide frequency range. The obtained frequency responses are then compared with each other to investigate the effect of multi-objective design on different aspects of the transformer winding... 

This research focuses on simulation of the dissimilar materials’ welding, stainless steel and mild steel, using finite element and experiment to enhance the method and better understand the transient temperature profiles and the stress distribution in a cladded pipe. The microstructural come as fenestrated and the computer results show that the temperature distribution in the modelled pipe is a function of the thermal conductivity of each weld metal as well as the distance away from the heat source. © 2018, International Association of Engineers. All rights reserved  

The main purpose of this study is to offer a new method for transient analysis of availability and survivability of a system with the identical components and one repairman and with every combination of components either standard system for example series systems, parallel systems, stand-by systems and K out of N systems or complex system. This method is a technique for fault tree evaluation too. The considered system is supposed to consist of n components and there are some composition of them that systems the failure occurs when one of its composition occur. Some concepts such as fault tree, Markov models, Eigen vectors and Eigen values are employed for analyzing the transient availability... 

Abstract: Well testing is one of the important methods to provide information about the reservoir heterogeneity and boundary limits by analyzing reservoir dynamic responses. Despite the significance of well testing data, misinterpreted data can lead us to a wrong reservoir performance prediction. In this study, we focus on cases ignoring the adjacent well’s production history, which may lead to misinterpretation. The analysis was conducted on both homogeneous and naturally fractured reservoirs in infinite-acting and finite-acting conditions. The model includes two wells: one is “tested well” and the other is “adjacent one.” By studying different scenarios and focusing on derivative plots, it...