Sharif Digital Repository

Feature vector extraction, based on local image texture, is a primitive algorithm for many other applications, like segmentation, clustering and identification. If these feature vectors are a good match to the human visual system (HVS), we can expect to get the appropriate results by using them. Gabor filters has been used for this purpose successfully. In this paper we introduce a novel refinement, with the use of Matching Pursuit (MP) to improve the Gabor based texture feature extractor. With this improvement, we show that the separability of different textures will increase. Another consideration in this work is computation complexity. Therefore, we limit the basis function set to reduce... 

Optimized conditions of hot and cold rolling followed by annealing can result in a balance between recrystallization and rolling textures in order to reduce the planar anisotropy of brass sheets. In this work, the effect of finish rolling temperature, cold reduction and annealing temperature on texture development has been investigated. It is shown that uniform deformation at higher finishing temperature is responsible of formation of a severe Cube and G texture components. In contrast, mechanical twinnings are widely formed at low finishing temperatures. There is also a direct relation between the intensity of Cube component and the amount of cold reduction  

High strength TRIP-aided steel sheets with high formability and better ductility are of industrial interest. Texture control and retained austenite characterization are considered as the main factors with respect to the formability and ductility. In this work, the effect of cold rolling and intercritical annealing on texture development has been investigated for two TRTP-aided steel sheets, which are different in Si and Al content. Experiments show that the cold rolling extends the a and γ-fibers on these grades of steel. Intercretically annealing decreases the intensity of α-fiber and leads to sharpness of γ-fiber, especially for Al steel  

The thermal field and the grain structure of a cored superalloy turbine blade, which has been directionally solidified with the liquid metal cooling (LMC) process, has been simulated in three dimensions using a cellular automaton (CA) coupled with finite-element (CAFE) model. The cooling induced by the liquid aluminum bath has been replaced by a heat-transfer coefficient, whose temperature- and time-dependence has been adjusted on the basis of natural convection simulations and dimensionless analyses. The simulated grain structure and crystallographic texture have been compared with the microstructure, and the electron back-scattered diffraction (EBSD) results were obtained for a real blade.... 

The effects of zinc content (2 and 4 wt%), heat treatment (solution-Treated and T6), as well as hot deformation (extrusion and multi-directional forging (MDF)) on the microstructure, mechanical and degradation behavior of Mg-Zn alloys were studied. As the result of microstructure refinement, solid solution and precipitate strengthening (formation of MgZn second phases), the strength of pure Mg was increased after Zn addition. Solution treatment of the Mg-4Zn alloy resulted in 16% softening due to the dissolution of the MgZn second phases and also grain growth, while aging treatment increased the strength value by 8% in comparison to the as-cast material because of the formation of the fine... 

Understanding the effect of crystallographic orientation on the twinnin/detwinning mechanisms in NiTi shape memory alloys at an atomistic scale can help to control and tune the mechanical properties and failure behavior of such materials. In this work, we employed classical molecular dynamics (MD) and density functional theory (DFT) computational methods to better understand how twinning and detwinning occurs through a combination of slip, twin, and shuffle on 〈0 1 0〉, 〈1 1 0〉, and 〈1 1 1〉 crystallographic orientations under uniaxial tensile test. Elastic constants including Young's Modulus (E), Bulk modulus (B), Poisson's ratio (ν), and Shear Modulus (G) are obtained and computed for... 

The fabrication of Ni/Ti laminated composite via cross accumulative roll bonding (CARB) and subsequent annealing treatment has been studied. The relationships between annealing conditions and microstructure at interfaces of Ni/Ti have been investigated by SEM, XRD, and EDS analyses. The results show that the layers were well-bonded by the CARB process, and by increasing the temperature and time of annealing treatment, the interfacial layers grew as a result of the interdiffusion of Ni and Ti atoms. The main intermetallic phases were NiTi and NiTi2, both of which obeyed linear kinetics of growth. However, the calculated activation energy of NiTi was lower than that of NiTi2, indicating the... 

The presence of nodules on the surface of cathode copper plates was the most important reason for the failure of the punch of mechanical clinching of copper cathode sheets. This study demonstrated a comprehensive investigation into the nodulation growth of copper cathodes in the electrorefining plant based on metallographic analysis. More than 15 random samples were selected from the top, middle, and bottom of the cathodes produced in the Khatoon Abad copper refinery, Iran. Studies were carried out based on the determination of growth modes including field oriented isolated crystal (FT), basis-oriented reproduction (BR), field-oriented texture (FT), and unoriented dispersion (UD). A scanning... 

Few-view or sparse-view computed tomography has been recently introduced as a great potential to speed up data acquisition and alleviate the amount of patient radiation dose. This study aims to present a method for high-quality ultra-fast image reconstruction from sparsely sampled projections to overcome problems of previous methods, missing and blurring tissue boundaries, low-contrast objects, variations in shape and texture between the images of different individuals, and their outcomes. To this end, a new deep learning (DL) framework based on convolution neural network (CNN) models is proposed to solve the problem of CT reconstruction under sparsely sampled data, named the multi-receptive... 

In this study, we investigate the limitations and influence of various factors on the performance of trolling mode atomic force microscopy (TR-AFM). For this purpose, at first, based on the governing equations of motion and using a conventional control method, a simulation tool capable of correctly simulating the imaging procedure in TR-AFM is developed. Then based on the developed simulation tool, imaging of different surfaces is performed, and the effect of different factors on the image quality is analyzed. The flexibility of nanoneedle in TR-AFM has unpredictable effects on dynamics of system as well as imaging performance. One problem in imaging is due to coexistence of two stable... 

Efficient utilization of solar energy as the cleanest and most plentiful natural resource for drinking water is a water is as sustianble and environmental friendly approach to obviate long-standing water scarcity. Carbon-based photothermal absorbers due to broadband light absorption are very interesting in interfacial solar steam generation systems. Herein, we investigate the convenient application of reduced graphene oxide (rGO) nanosheets with carbon black (CB) nanoparticles on the cotton fabric as a flexible texture-based photothermal absorber. Polyurethane (PU) as a self-floating insulator foam was selected to manage the energy loss and preserve light converted to heat on the fabric... 

Magnesium and its alloys have gained significant popularity due to their light weight and their potential for use as bioresorbable materials. However, their application is limited in practice due to their relatively poor corrosion resistance. Several methods are available for improving the corrosion resistance of Mg alloys for bio-applications such as using different coatings, alloying, and modifying the microstructural parameters such as the grain size and the crystallographic texture. This review provides a comprehensive summary of the effects of crystallographic texture and twinning, as one of the most important deformation mechanisms of Mg and Mg alloys, on the corrosion behavior.... 

The microstructure evaluation and phase transformation of multi-pass friction stir-processed (FSP) commercially pure titanium were investigated using optical microscopy, scanning electron microscopy equipped with a backscatter detector, and electron backscatter diffractometer. The microstructure characterization shows that the grain refinement mechanism changed with the increasing number of passes. The equiaxed α grains in the untreated sample changed to lath-shaped grains surrounded by serrated grain boundaries, and produced Widmanstätten morphology during the cooling cycle of FSP. The higher micro-hardness values and bio-corrosion resistances of the FSP-treated samples are due to their...