Sharif Digital Repository

WO3 films with thicknesses between 550 and 853 nm were deposited on glass substrates using the electron beam evaporation method at room temperature. The microstructures and surface roughness of the films were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). It was observed that the crystalline structure of the WO3 thin films significantly changes from the amorphous to crystalline states with a crystalline texture, and the mosaicity and grain size dependent on the film thickness. The transmittance spectra of the obtained WO3 films were measured in the range from 340 to 850 nm, and the Swanepoel method was used to determine the refractive indices and the thicknesses of the... 

WO3 films with thicknesses between 550 and 853 nm were deposited on glass substrates using the electron beam evaporation method at room temperature. The microstructures and surface roughness of the films were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). It was observed that the crystalline structure of the WO3 thin films significantly changes from the amorphous to crystalline states with a crystalline texture, and the mosaicity and grain size dependent on the film thickness. The transmittance spectra of the obtained WO3 films were measured in the range from 340 to 850 nm, and the Swanepoel method was used to determine the refractive indices and the thicknesses of the... 

Equal channel angular pressing is an effective technique to control the texture and microstructure of metals and alloys. Texture and microstructure of an Al-7075 alloy subjected to repetitive equal channel angular pressing through a 90° die were evaluated by X-ray diffractometer and orientation imaging microscopy. It is observed that processing through different routes leads to different types of textures, in both qualitative and quantitative senses. The texture calculation by Labotex software reveals that texture strengthens after the first pass and weakens by progressing ECAP process up to 4 passes. Microstructure investigations show that after 4 passes of equal channel angular pressing... 

Nematic shells of liquid crystals have been provided in microscales. Defect structures in the shells are very essential in the electro-optical applications of such colloidal objects. We have numerically minimized the free energy of symmetric and asymmetric spherical shells of the nematic liquid crystal. Considering degenerate planar anchoring on the surfaces and isotropic nematic elasticity, a variety of defect structures are observed by controlling or varying the thicknesses of the shell and its degree of asymmetry. In symmetric shells, our calculations show that boojums (bipolar) defects appear in thick shells and tetrahedral (baseball) defects in thin shells. In asymmetric shells, while... 

The effect of welding current and polarity, i.e. AC and DCEN, on imposed thermal cycles, mechanical properties, microstructural events and residual stresses was investigated in GTA welding of AA5052. A three-dimensional thermo-mechanical model was utilized to evaluate thermal responses and residual stresses distribution in the weldments. Tensile testing and hardness measurements were also conducted to study the effect of welding polarity on the mechanical properties of components. Microstructural observations utilizing optical microscopy were carried out to assess the microstructural evolutions. The results show that wide varieties of microstructures are produced in DCEN sample from cells at... 

In this work, examinations on the microstructure and mechanical properties of plain carbon steel and AISI 430 ferritic stainless steel dissimilar welds are carried out. Welding is conducted in both autogenous and using ER309L austenitic filler rod conditions through gas tungsten arc welding process. The results indicate that fully-ferritic and duplex ferritic-martensitic microstructures are formed for autogenous and filler-added welds, respectively. Carbide precipitation and formation of martensite at ferrite grain boundaries (intergranular martensite) as well as grain growth occur in the heat affected zone (HAZ) of AISI 430 steel. It is found that weld heat input can strongly affect grain... 

The texture, microstructure, and mechanical properties of severely deformed aluminum subjected to friction stir processing (FSP) with SiC nanoparticles under ambient and cryogenic temperatures are comprehensively investigated. Even one pass of FSP in the ambient temperature results in the formation of quite large grain structure with random texture in the heat affected zone (HAZ). It suggests the occurrence of static recrystallization and subsequent grain growth because of the appreciable strain stored within the base metal. One FSP pass under condition of cryogenic temperature causes to the development of bimodal grain size distribution in HAZ, including the elongated grains with interior... 

The texture development during friction stir processing (FSP) of 1050 aluminum severely deformed at the strain magnitude of 2.32 was comprehensively discussed. It was observed that the component B¯ of the ideal shear texture along with the cube texture was developed in the severely deformed base metal. The effects of base metal texture on the texture development of stir zone, thermo-mechanically affected zone, and heat-affected zone during FSP were examined. Also, the developed texture components in the vicinity of the FSP tool and the stir zone were correlated to the deformation induced by the rotating tool which consisted of pin and shoulder. The observed texture components in the... 

Herein, we present a novel, simple, and ultrasensitive electrochemical DNA (E-DNA) sensor based on hollow carbon spheres (HCS) decorated with polyaniline (PANI). A thiolated 21-mer oligonucleotide, characteristic of HBV DNA, is immobilized via electrodeposited gold nanoparticles on HCS-PANI. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS) are used to characterize the electrochemical properties of the prepared nanocomposite. Scanning electron microscopy is employed to investigate the morphological texture of the fabricated modifier. An enhanced intrinsic signal of PANI is probed to evaluate the biosensing ability of the prepared... 

In this paper we propose a method for CBIR based on the combination of texture, edge map and color. As texture of edges yields important information about the images, we utilized an adaptive edge detector that produces a binary edge image. Also, using the statistics of color in two different color spaces provides complementary information to retrieve images. Our method is time efficient since we have applied texture calculations on the binary edge image. Our experimental results showed both the higher accuracy and lower time complexity of our method with similar related works using SIMPLIcity database  

The control of texture and microstructure can be achieved by an appropriate thermomechanical treatment in industrial production. The effects of finish rolling temperature, cold reduction and annealing temperature on texture development and microstructure in Brass sheet were investigated. The role of deformation inhomogeneities on texture evolution has been considered. The formation of transition bands during hot rolling enforced the intensity of cube components. Shear bands increased the intensities of S and Cu components after cold rolling and at higher cold reductions. Transition from Cu to Y and Y to Bs was completed better because of mechanical twinning. Thermal twins annihilated the... 

Optimized conditions of hot and cold rolling followed by annealing can result in a balance between recrystallization and rolling textures in order to reduce the planar anisotropy of brass sheets. In this work, the effect of finish rolling temperature, cold reduction and annealing temperature on texture development has been investigated. It is shown that uniform deformation at higher finishing temperature is responsible of formation of a severe Cube and G texture components. In contrast, mechanical twinnings are widely formed at low finishing temperatures. There is also a direct relation between the intensity of Cube component and the amount of cold reduction  

In this study, we investigate the limitations and influence of various factors on the performance of trolling mode atomic force microscopy (TR-AFM). For this purpose, at first, based on the governing equations of motion and using a conventional control method, a simulation tool capable of correctly simulating the imaging procedure in TR-AFM is developed. Then based on the developed simulation tool, imaging of different surfaces is performed, and the effect of different factors on the image quality is analyzed. The flexibility of nanoneedle in TR-AFM has unpredictable effects on dynamics of system as well as imaging performance. One problem in imaging is due to coexistence of two stable... 

An advantage of steganography, as opposed to other information hiding techniques, is that the embedder can select a cover image that results in the least detectable stego image. In a previously proposed method, a technique based on block texture similarity was introduced where blocks of cover image were replaced with the similar secret image blocks; then indices of secret image blocks were stored in cover image. In this method, the blocks of secret image are compared with blocks of a set of cover images and the image with most similar blocks to those of the secret image is selected as the best candidate to carry the secret image. Using appropriate features for comparing image blocks,... 

Partial discharge (PD) measurement is one of the best methods for condition monitoring of transformers. In this paper, we use 5 different types of defects as follows: scratch on winding insulation, bubble in oil, moisture in insulation paper, a very small free metal particle in the transformer tank, and a fixed sharp metal point on the transformer tank, for our PD-related studies. Each type of defect is implemented into 1 of the 5 identical transformer models, which had been developed in the authors' recent work. The continuous wavelet transform is applied to each related measured time-domain PD signals. This process results in an image, for each PD pulse in the time-frequency domain. Using... 

The presence of nodules on the surface of cathode copper plates was the most important reason for the failure of the punch of mechanical clinching of copper cathode sheets. This study demonstrated a comprehensive investigation into the nodulation growth of copper cathodes in the electrorefining plant based on metallographic analysis. More than 15 random samples were selected from the top, middle, and bottom of the cathodes produced in the Khatoon Abad copper refinery, Iran. Studies were carried out based on the determination of growth modes including field oriented isolated crystal (FT), basis-oriented reproduction (BR), field-oriented texture (FT), and unoriented dispersion (UD). A scanning... 

In this paper, Ti-6Al-4V/TiC composite was fabricated by VIM furnace and graphite crucible. X-ray diffraction analysis and EDS techniques were used to identify the phases in the material. Microstructure characteristics of the Ti-6Al-4V/TiC composite were evaluated by means of optical microscopy. The tensile test was performed at room temperature after hot-rolling of the samples in the beta phase field. The results revealed that at different melting times, three kinds of precipitates are formed in the microstructure including grain boundary, eutectic and transgranular precipitates. The size of transgranular precipitates was significantly larger than that of the other two types of carbides and... 

We have investigated an oxidation of substrate effect on structural morphology of zinc oxide (ZnO) rods. ZnO rods are grown on porous silicon (PS) and on thermally oxidized porous silicon substrates by carbothermal reduction of ZnO powder through chemical vapour transport and condensation. Porous silicon is fabricated by electrochemical etching of silicon in hydrofluoric acid solution. The effects of substrates on morphology and structure of ZnO nanostructures have been studied. The morphology of substrates is studied by atomic force microscopy in contact mode. The texture coefficient of each sample is calculated from X-ray diffraction data that demonstrate random orientation of ZnO rods on... 

ZnO tetrapods and rods were grown on silicon and thermally oxidized porous silicon substrates with and without Au catalyst layer by carbothermal reduction of ZnO powder through chemical vapor transport and condensation method (CVTC). Porous silicon was fabricated by electrochemical etching of silicon in HF solution. The effect of substrates on morphology, structure and photoluminescence spectra of ZnO nanostructures has been studied. The texture coefficient (TC) of each sample was calculated from XRD data that demonstrated random orientation of ZnO nanostructures on the oxidized porous silicon substrate. Moreover, TC indicates the effect of Au catalyst layer on formation of more highly... 

In this study Al2O3-SiC micro/nanocomposites have been fabricated by mixing alumina nanopowders and silicon carbide micro/nanopowders, followed by hot pressing at 1550, 1600, 1650 and 1700°C. The density, mechanical properties and fracture mode of Al2O3-SiC composites containing different volume fractions (2.5%, 5%, 7.5%, 10% and 15%) of micro/nanoscale SiC particles were investigated and compared with those of alumina. The relative density of composites could reach values very close to theoretical density, especially after sintering at 1700°C. However, relative density declined by increasing the SiC fraction at the same sintering temperature. The flexural strength of composites was best for...