Sharif Digital Repository

In this paper, the artificial neural network has been applied to estimate the reaction rate of methanol dehydration in dimethyl ether synthesis. The multilayer feed forward neural network with three inputs and one output has been trained with different algorithms and different numbers of neurons in the hidden layer. Two thirds of all training data are used for training of the network and the rest are used for testing of the generalization of the network. The accuracy of the proposed model was found to agree well with the experimental results over a wide range of experimental conditions. The results clearly depict that the neural network is a powerful tool to estimate the reaction rate and... 

In this study by Thermal Chemical Vapor Deposition (TCVD) method, the synthesis of carbon nanotubes (CNTs) and temperature affects on the grown CNTs on the NiSio2 catalyst and 304-type stainless steel was investigated. The purification of the grown CNTs on the 304-type stainless steel was also investigated in this study. The synthesis and purification of the samples were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), termogravimetric analysis (TGA) and Raman spectroscopy. Our obtained result by SEM and TEM shows that densities of CNTs growth on the 304-type stainless steel are more than the CNTs growth on the NiSio2 catalyst and both of them have... 

In the present paper, new H2S gasochromic nanomaterial of mixed silver nickel ammonium phosphomolybdate synthesized by microwave assisted technique is reported. The microwave treatment was performed in the solid phase using urea and ammonium nitrate as the promoter and oxidizer agents. The designed process allows rapid synthesis of large amounts of this product in nanosized particulate morphology. Morphological and structural features of the prepared products were studied in detail. Chemical analyses indicated a stoichiometry of (NH4)0.5Ni0.75AgPMo12O40·4H2O revealing a Keggin-type framework with substitution of silver and nickel cations in its secondary structure. A home-made set-up was... 

The application of silicon nanowire (SiNW) biosensor as a subtle, label-free, and electrical tool has been extensively demonstrated by several researchers over the past few decades. Human ability to delicately fabricate and control its chemical configuration, morphology, and arrangement either separately or in combination with other materials as lead to the development of a nanomaterial with specific and efficient electronic and catalytic properties useful in the fields of biological sciences and renewable energy. This review illuminates on the various synthetic methods of SiNW, with its optical and electrical properties that make them one of the most applicable nanomaterials in the field of... 

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi-layered poly(2-dimethylaminoethyl acrylamide)-coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one-pot three-component reaction of alkyl halide, sodium azide and alkyne, known as copper-catalyzed click synthesis of 1,2,3-triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of... 

A new magnetic nano-adsorbent was synthesized via the radical polymerization of methyl acrylate on modified Fe3O4 nanoparticles, followed by its functionalization by amidation of the methyl ester groups using pentaethylenehexamine, to create active adsorption sites for removing anionic dyes from aqueous media. Physicochemical properties of the adsorbent were then characterized by SEM, TEM, XRD, FTIR, TGA and CHN analysis. The prepared nanocomposite was used as adsorbent for the removal of anionic dyes, naphthol green B and chromeazurol S, from aqueous solution and assessed in view of the kinetics and isotherm adsorption, and the effect of solution pH, contact time and initial dye... 

In this study, a new type of magnetite nanocomposite with a core-shell structure was synthesized using Fe3O4 nanoparticles as a core and polyaniline (PANI) as a shell. For this propose, the surface of Fe3O4 was chemically modified with hexamethylenediisocyanate (HMDI) to improve its compatibility and interphase interaction with the polymeric matrix. Thereafter, the PANI was reacted with modified Fe3O4 to anchor them to PANI by covalent bands which acted as a shell. In the second step, the poly (maleic acid-co-acrylic acid) (P(MAc-co-AA)) as polymeric dopant for the PANI was synthesized. Finally, the PANI anchored to Fe3O4 was immersed in an aqueous solution of poly (maleic... 

The heterobinuclear platinum(0)-gold(I) complex [(t-Bu3P)2PtAu(PPh3)] BF4, 5, was synthesized by the reaction of trinuclear cluster complex f[(PPh3)Au]3(μ-O)gBF4, 4, with one equiv of [(t-Bu3P)2Pt] at room temperature. The heterobinuclear complex 5 was characterized using multinuclear NMR spectroscopy and elemental microanalysis and was further identified by single crystal X-ray structure determination. Crystal structure of 5 shows a T-shaped geometry with an unsupported short distance Pt-Au dative bond  

Abstract: Polyoxometalate-functionalized magnetic nanoparticles (Fe3O4@SiO2–MnPOW) were successfully synthesized via covalent anchoring of Mn(II)-substituted phosphotungstate on ammonium-modified Fe3O4@SiO2 nanoparticles. The complete characterization of nanoparticles has been carried out by scanning electron microscope, energy-dispersive X-ray, X-ray diffraction, Fourier transform infrared and elemental analysis. The resulting nanocomposites were efficient catalysts for the selective oxidation of sulfides with different green oxidants in good to excellent yields and also high selectivity. Leaching and recycling tests showed that the nanocatalyst can be reused several times without... 

ZnS nanoparticles were synthesized through a one-step precipitation process. Effect of time and temperature on the formation reaction was investigated. The synthesized samples were characterized by X-ray diffraction (XRD), ultraviolet (UV) visible absorption and photoluminescence (PL) spectrophotometry. Based on XRD and UV-Vis data, the particles produced at 70 °C had a mean particle size of about 5 nm. Increasing time and temperature of the synthesis reaction resulted in photoluminescence intensification. PL spectroscopy helped understanding the adsorption kinetics of oxygen on ZnS nanoparticles during the precipitation synthesis process. Fabrication of ZnS structures with appropriate... 

A new method for the fabrication of an electromagnetic nanocomposite based on Fe3O4 and polyaniline (PANI) is offered. The authors focused on improvement of the physical and electromagnetic properties of the nanocomposite using a new synthetic method. Supermagnetic Fe3O4 nanoparticles were synthesized through coprecipitation method. As a chemical modification, the third generation of poly (amidoamine) dendrimer was grafted on the surface of the nanoparticles. PANI was grafted from -NH2 functional groups of dendrimer via in situ polymerization of aniline. Finally, Au nanoparticles were loaded on the nanocomposite and its catalytic activity for reduction reactions was studied  

Two new heteronuclear Nickel(II)/Sodium(I) complexes of a side-off compartmental Schiff base ligand were synthesized and characterized by spectroscopic methods. Crystal structures of both of the complexes were also obtained. The Schiff base ligand was synthesized from the condensation of meso-1,2-diphenyl-1,2-ethylenediamine with 2-hydroxy-3-methoxybenzaldehyde. In both of the complexes the Ni(II) ion is coordinated to the inner N2O2 coordination sphere with square-planar geometry and the Na(I) ion is coordinated to the outer O2O2′ coordination sphere. In Complex (1) with general formula [Ni(L)Na(CH3OH)(ClO4)] the sodium ion is seven coordinated while in (2) with general formula... 

A silicon carbide coating was formed on the surface of graphite flakes by reaction of molten Si with carbon at 1100-1300. °C in a 95%KCl-5%NaF molten salt under Ar atmosphere. The effect of temperature and Si/graphite ratio in the initial mixture on the quality and the amount of SiC were investigated by XRD and SEM/EDS analyses. Also, the water wettability, oxidation resistance and zeta potential of un-coated and coated graphite were examined by TGA analysis and sedimentation test. The results show the amount of coating to increase in the coated flakes with increasing temperature and Si/graphite ratio. The SiC coating improves water wettability of graphite and acts as a protective layer to... 

This paper deals with obtaining aromatherapic textiles via applying stimuli-responsive poly N-isopropyl acryl amide (PNIPAAm) chitosan (PNCS) nano hydrogels containing cinnamon oil on cotton fabric and looks into the treated fabric characteristics as an antibacterial and temperaturepH responsive fabric. The semi-batch surfactant-free dispersion polymerization method was proposed to the synthesis of PNCS nano particles. The incorporation of modified β -cyclodextrin ( β-CD) into the PNCS nanohydrogel was performed in order to prepare a hydrophobic(cinnamon oil) carrier embedded in stimuli-responsive nanohydrogel. The β -CD postloading process of cinnamon oil in to the hydrogel nano particles... 

An approach to access azaborininones (carbonyl-containing, boron-based heterocyclic scaffolds) using simple reagents and conditions from both organotrifluoroborates and boronic acids is described. An inexpensive, common reagent, SiO2, was found to serve as both a fluorophile and desiccant to facilitate the annulation process across three different azaborininone platforms. Computational analysis of some of the cores synthesized in this study was undertaken to compare the azaborininones with the analogous carbon-based heterocyclic systems. Computationally derived pKa values, NICS aromaticity calculations, and electrostatic potential surfaces revealed a unique isoelectronic/isostructural... 

In this article, a new double spinning disks reactor (DSDR) has been proposed and tested successfully for the synthesis of barium sulfate nanoparticles by means of the reactive precipitation. The proposed DSDR consists of two coaxial rotating disks placed horizontally in a cylindrical chamber. Continuous precipitation of barium sulfate nanoparticles as a chemical test system was carried out using this new contacting device and the effects of operating and design parameters such as the disk rotational speed, distance between the disks, feed concentration, feed flow rate, free ion ratio, feed location, and feed distribution pattern on the mean size, size distribution, and morphology of the... 

In the present study, nanoscale iron oxide was synthesized using a hydrothermal method; XRD analysis revealed that all the produced crystals are iron oxide. FESEM microscopic imaging showed that particles are on the scale of nano and their morphology is cloud fractal. To study the laboratory properties of thermal conductivity, viscosity, and electrical conductivity of the nanoparticles, they were dispersed in ethylene glycol-based fluid and the nanofluid was in a two-step synthesis during this process. The experiments were carried out with a weight fraction between 0 and 2 % at temperatures between 25 and 45 °C. According to the results of the experiments, increasing the density of... 

Barium hexaferrite (BaFe12O19) nanoparticles were synthesized by sol–gel auto-combustion route. Prepared samples were sintered at 950 and 1100 °C with Fe3+/Ba2+ = 12 and 20 mol ratio. The formation mechanism of barium hexaferrite was investigated by using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses. In addition, the effect of temperature and Fe3+/Ba2+ mole ratio on BaFe12O19 formation and magnetic properties, and the effect of increasing the Fe3+/Ba2+ upon gel ignition and subsequent phase development were investigated. Finally the magnetic behavior was monitored with VSM. DSC studies showed that pure barium hexaferrite phase was formed from maghemite... 

ZnO–CeO2 nanoparticles were synthesized by microwave combustion and deposited by electrophoretic deposition (EPD). The effect of using two different alcohols, ethanol and methanol, was investigated on EPD behavior and morphology of deposited film. Moreover, the effect of concentration of nanoparticles and applied voltage on the mass of deposit and the variation in the current density were investigated. With a change in the alcohol type, the surface morphology of deposition changed and some voids were observed on the deposition surface in ethanol. In all cases, with increasing concentration of nanoparticles in suspension, the number of developed cracks increased. Besides, a rise in voltage... 

Nickel nanoparticles supported on MgO-Al2O3 and Al2O3 were synthesized by an impregnation method using dinitrobisethylenediamine nickel and nickel nitrate hexahydrate as precursors and were used as catalysts for CO methanation. Different MgO contents (1.5-11.25 wt %) were employed for the preparation of supports, and NiO loadings were in the range of 10-40 wt %. The optimum catalyst prepared from proper amounts of MgO (∼2 wt %) and NiO loading (20 wt %) with [Ni(en)2(H2O)2](NO3)2 as precursor and a mesoporous support with a wide range of mesopores resulted in highly dispersed nickel nanoparticles that exhibited moderate metal-support interactions, lower acidic surface sites, and enhanced...