Sharif Digital Repository

In this study, central composite design (CCD) at five levels (-1.63, -1, 0, +1, +1.63) combined with response surface methodology (RSM) have been applied to optimise methanol carbonylation using a ruthenium-promoted iridium catalyst in a homogenous phase. The effect of seven process variables, including temperature, pressure, iridium, ruthenium, methyl iodide, methyl acetate and water concentrations, as well as their binary interactions, were modelled. The determined R 2 values greater than 0.9 for the rate and methane formation data confirmed that the quadratic equation properly fitted the obtained experimental data. The optimum conditions for maximum rate and minimum methane formation were... 

In this paper, an industrial ethylbenzene production unit has been simulated and the results are compared against five-day experimental data. According to prevailing unit condition, i.e. recycled ratio of benzene, benzene selectivity, and energy consumption, the unit is not working under its optimum conditions for minimum cost of ethylbenzene production. In the current design, high amount of benzene recycle (6:1) causes to have an additional cost due to fractionation of ethylbenzene from benzene. A new approach is proposed to modify the benzene alkylation process and reduce the unit's energy consumption. In the newly designed scheme, two double-bed alkylation reactors converted into four... 

Fungal delignification can be considered as a feasible process to pre-treat lignocellulosic biomass in biofuel production, if its performance is improved in terms of efficiency thorough a few modifications. In this study, Trichoderma viride was utilized to investigate the effect of wet-milling, addition of surfactant (Tween 80) and optimization of operating factors such as temperature, biomass to liquid medium ratio and glucose concentration on biodelignification of rice straw. Next, the enzymatic hydrolysis of pretreated biomass was studied at various pretreatment times. Results revealed that the wet milling and addition of surfactant increases the lignin removal about 15% and 11%,... 

Aluminum metal matrix composites (MMCs) reinforced with nanoceramics are ideal materials for the manufacture of lightweight automotive and other commercial parts. Adaptive neuro-fuzzy inference system combined with particle swarm optimization method is implemented in this research study in order to optimize the parameters in processing of aluminum MMCs. In order to solve the problems associated with poor wettability, agglomeration and gravity segregation of nanoparticles in the melt, a mixture of alumina and aluminum particles was used as the reinforcement instead of raw nanoalumina. Microstructural characterization shows dendritic microstructure for the sand cast and non-dendritic... 

In this research, the influence of anionic surfactant sodium dodecyl sulfate (SDS), pH, substrate finishing, and annealing temperature on the surface morphology and hardness of the electroless nickel phosphorus (ENi-P) coatings were studied. Taguchi's experimental design method was used. Parameters selected in three levels and L9 from orthogonal robust array design were employed. Surface roughnesses of the deposits were measured using a stylus instrument. Scanning electron microscope and x-ray diffraction analysis were implemented to study surface morphologies and phase composition, respectively. Microhardness of the ENi-P deposits was measured using a microhardness tester at three trials... 

MFI-type zeolite was successfully synthesized by hydrothermal crystallization of clear synthesis mixtures. A statistical experimental design method (the Taguchi method with an L8 orthogonal array) was implemented to optimize the experimental conditions for the preparation of MFI nanocrystals with respect to particle size and distribution as the desirable properties. In the Taguchi experimental design, crystallization temperature, water content, template/silica molar ratio, aluminum content, as well as the presence of alkaline cations were chosen as significant parameters affecting the properties. It was shown that water and aluminum content of the synthesis solution were the most important... 

In this study, the effect of electromagnetic vibration on joining of aluminum alloy 2024 was investigated. Simultaneously applying a static magnetic field and alternating electrical current passing through a conductor produced electromagnetic vibration. Joining was accomplished using constant electric current (60 A) and the magnetic flux of 75, 110, and 145 mT in the presence of argon gas. After joining, samples were cooled first by argon gas as a shielding gas and then by water. The microstructure and mechanical properties of the welded samples were studied for different electromagnetic vibrations. The optimum microstructure and mechanical properties were obtained when applied... 

The bioinertness makes surface treatments essential to improve the bioactivity of porous titanium scaffold, and surface treatment might affect their mechanical properties. So finding an optimum condition lying between bioactivity and mechanical properties seems to be curial. In this research, the effect of the time of the thermal oxidation at 600 °C on apatite formation and mechanical properties of the porous titanium scaffold was studied. The results of thin film X-ray diffraction and Raman spectroscopy indicated that the surface of heat treated samples up to 480 min was mainly covered by rutile. Also, wettability measurement and in vitro apatite formation ability assessment indicated that... 

Heat source addition to the axisymmetric supersonic inlet may improve the performance parameters, which will increase the inlet efficiency. In this investigation the heat has been added to the flow field at some distance ahead of an axisymmetric inlet by adding an imaginary thermal source upstream of cowl lip. The effect of heat addition on the drag coefficient, mass flow rate and the overall efficiency of the inlet have been investigated. The results show that heat addition causes flow separation, hence to prevent this phenomena, roughness has been added on the spike surface. However, heat addition reduces the drag coefficient and the inlet mass flow rate considerably. Furthermore, the... 

In this report, the synthesis of a novel superabsorbent hydrogel via γ-irradiation graft copolymerization of acrylamide onto sodium alginate and kappa-carrageenan hybrid backbones in a homogeneous solution is described. The Taguchi method was used as a powerful experimental design tool for synthesis optimization. A series of superabsorbent hydrogels was synthesized by proposed conditions of Qualitek-4 software. Considering the results of nine trials according to analysis of variance, optimum conditions were proposed. The swelling behavior of optimum superabsorbent hydrogels was studied in various solutions, with pH values ranging from 1 to 13. In addition, swelling kinetics, swelling in... 

Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with Polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslink-ing and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

Laser cutting characteristics including power level and cutting gas pressure are investigated in order to obtain an optimum kerf width. The kerf width is investigated for a laser power range of 50-170 W and a gas pressure of 1-6 bar for steel and mild steel materials. Variation of sample thickness, material type, gas pressure and laser power on the average cut width and slot quality are investigated. Optimum conditions for the steel and mild steel materials with a thickness range of 1-2 mm are obtained. The optimum condition for the steel cutting results in a minimum average kerf width of 0.2 mm at a laser power of 67 W, cutting rate of 7.1 mm/s and an oxygen pressure of 4 bar. A similar... 

In this study, biocompatible ceramic layers containing TiO2 and hydroxyapatite (HA) nanoparticles (TiO2/HA) were deposited on pure commercial titanium (Grade 2) by using plasma electrolytic oxidation and AC power supply. The coating process was carried out in five different solutions for various times at a current density of 500 mA cm−2. To achieve the optimum conditions for thickness and microstructure, the coating process was conducted in solutions with a 3 g L−1 concentration of HA nanoparticles. FESEM, XRD, and FTIR results showed that HA nanoparticles were successfully incorporated into the pores of the layer. Furthermore, the corrosion behavior of the coating layers in the simulated... 

CoMo/reduced graphene oxide (rGO) catalyst was synthesized for the oxidative desulfurization process (ODS) of dibenzothiophene (DBT) in n-decane. Parameters including total metal (Co and Mo) loading, Co/Mo and CA (citric Acid)/Mo molar ratios were investigated toward achieving optimum conditions. The catalysts were characterized by the XRD, ICP, FTIR, Raman Spectroscopy, BET-BJH, NH3-TPD, XPS, and TEM methods. The product sulfur content was measured by the ICP-OES while the product was evaluated using FTIR and 1H NMR analyses. All experimental stages were designed using Design-Expert software. High BET area, acidity, uniform particle size, and Co-promoter played key roles in this... 

In this study, biodiesel (FAME) was prepared using a novel heterogeneous catalyst of phosphomolybdic acid (H3PMo12O40, HPMo)/support graphene oxide (GO). The characterization of the catalyst was evaluated by SEM, EDX, Map analysis, TEM, FT-IR, and Raman analyses. The production of biodiesel from waste cooking oil (WCO) was carried out by the electrolysis method. The process of the trans-esterification reaction was optimized by applying the response surface methodology (RSM) based on the central composite design (CCD) approach. The effects of four independent variables of methanol to oil molar ratio (6–12 mol:mol), catalyst weight (0.5–1.5 wt%), time (8–24 h), and voltage (30–70 V) were... 

Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using eerie ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA  

In this work we present an ellipsoid cavity regime for the production of a bunch of quasi-monoenergetic electrons. The electron output beam is more effective than the periodic plasma wave method or the plasma-channel-guided method. A hyperbola, parabola or ellipsoid path is described for the electron trajectory motion in this model. A dense bunch of relativistic electrons with a quasi-monoenergetic spectrum is self-generated here. The obtained results show a smaller width for the electron energy spectrum in comparison with the previous results. We found that there are optimum conditions to form the ellipsoid cavity. Laser beam properties (such as the spot size, power and pulse duration) and... 

Oil trapping behavior during the pre-flush stage is critically important to evaluate the effectiveness of matrix acidizing for the oil well stimulation. In this study, the visco-capillary behavior of the two-phase flow in the pore-scale is analyzed to investigate the influence of wetting properties for a natural rock sample. A two-dimensional model, based on Cahn-Hilliard phase-field and Navier-Stokes equations, was established and solved using the finite element method. A stability phase diagram for log capillary number (Ca)-log viscosity ratio (M) was constructed and then compared with the reported experimental works. The maximum and minimum ranges of capillary number and viscosity ratio... 

For the application of human neural stem cells (hNSCs) in neural regeneration and brain repair, it is necessary to stimulate hNSC differentiation towards neurons rather than glia. Due to the unique properties of graphene in stem cell differentiation, here we introduce reduced graphene oxide (rGO)/TiO2 heterojunction film as a biocompatible flash photo stimulator for effective differentiation of hNSCs into neurons. Using the stimulation, the number of cell nuclei on rGO/TiO2 increased by a factor of ∼1.5, while on GO/TiO2 and TiO2 it increased only ∼48 and 24%, respectively. Moreover, under optimum conditions of flash photo stimulation (10 mW cm-2 flash intensity and 15.0 mM ascorbic acid in... 

This work deals with waste heat recovery from a proposed direct internal reforming molten carbonate fuel cell (DIR-MCFC), including an integrated pre-reformer. In this regard, some advantages are attainable over exhaust gas recycling. For instance, due to low temperature in the pre-reformer, carbon deposition and coke formation resulting from higher hydrocarbons can be eliminated. In this study, the cathode outlet provides the heat requirement for the pre-reforming process. After partial heat recovery from the cathode outlet, the stream still has a considerable energy and exergy (352.55 °C and 83.687 kW respectively). This study investigates waste heat recovery from the proposed DIR-MCFC,...