Sharif Digital Repository

This research focused on fabrication of various carbon nanofibers (CNFs) from electrospun Polyvinyl alcohol (PVA) by utilization of iodine (I2) and cadmium acetate dihydrate (Cd) as stabilizers. Moreover, the influence of carbon nanotube (CNT) incorporation on structure and morphology of CNFs was investigated. In this regard, PVA and PVA-Cd solutions were individually prepared and electrospun. The resulting nanofibers were treated in I2 vapor and then carbonized. In the case of CNT incorporation, oxidized CNTs were first scattered in PVA and PVA-Cd solutions and then electrospun, iodinated and carbonized in the same conditions as mentioned above. It was found that the I2, Cd and their... 

Nanostructured TiO2-SnO2 thin films and powders were prepared by a facile aqueous particulate sol-gel route. The prepared sols showed a narrow particle size distribution with hydrodynamic diameter in the range 17.2-19.3 nm. Moreover, the sols were stable over 5 months, since the constant zeta potential was measured during this period. The effect of Sn:Ti molar ratio was studied on the crystallisation behaviour of the products. X-ray diffraction analysis revealed that the powders were crystallised at the low temperature of 400 °C containing anatase-TiO2, rutile-TiO2 and cassiterite-SnO2 phases, depending on annealing temperature and Sn:Ti molar ratio. Furthermore, it was found that SnO2... 

The interaction of quantum radiation and a two-level atom is described in the context through the Jaynes-Cummings-Paul Hamiltonian which is obtained through Heisenberg's interaction picture of the Atom-Radiation Hamiltonian. We argue that such a transformation is not mathematically exact in case of ultrastrong coupling, where the coupling rate is comparable to the transition frequency, and leads to erroneous results. In addition, we introduce an exact mathematical solution to calculate optical spectrum of this system  

TiO2 nanoparticles were synthesized by sol-gel method using titanium tetraisopropoxide. Sulfate ions were introduced on the titania by impregnation method using sulfuric acid as precursor of sulfate ions. Fourier transform infrared and energy-dispersive X-ray spectroscopy, X-ray fluorescence as well as X-ray diffraction, scanning electron microscopy, and BET methods were used for the characterization of the obtained nanoparticles. The esterification of isoamyl alcohol with acetic acid was investigated to prove the catalytic activity of the TiO2 nanoparticles under solvent-free conditions. Response surface methodology was applied to optimize the effect of some parameters such as the molar... 

The authors describe an impedimetric method for the quantitation of the DNA of the human papilloma virus (HPV) type 16. A glassy carbon electrode (GCE) was modified with gold nanosheets and is shown to be superior to a common gold disk electrode. A single-stranded 25mer oligonucleotide (ssDNA) acting as the probe DNA was immobilized via its thiolated 5′ end on both electrodes. After hybridization with target (analyte) DNA, electrochemical impedance spectra were acquired in the presence of hexacyanoferrate as a redox marker. The sensor can distinguish between complementary, non-complementary and single base pair mismatches of HPV ssDNA. At a 1 mM hexacyanoferrate concentration, the biosensors... 

Risperidone (RIS), one of the typical antipsychotics drugs, originally approved to be used for the mental illness treatment, especially schizophrenia, bipolar disorder, autism and major depression. In the present study, different carbon nanostructures including functionalized multi-walled carbon nanotubes (F-MWCNTs), carbon nanoparticles, nanodiamond-graphite and reduced graphene oxide were employed for modification of the surface of glassy carbon electrode (GCE) for ultrasensitive detection of RIS. The most significant increase in the anodic peak current of RIS was observed on F-MWCNTs-modified electrode (compared to the other modified electrodes and bare GCE). The influence of different... 

The authors demonstrate efficient direct electron transfer from the enzyme glucose oxidase to vertically aligned gold nanorods with a diameter of ~160 nm and a length of ~2 μm that are covalently linkage to a 3-dimensional network of reduced graphene oxide nanosheets. The assembly can be prepared by a 2-step electrochemical procedure. This hybrid structure holds the enzyme in a favorable position while retaining its functionality that ultimately provides enhanced performance for enzymatic sensing of glucose without utilizing mediators. The nanorod assembly was applied to the voltammetric detection of glucose. Figures of merit include an electrochemical sensitivity of 12 μA·mM−1·cm−2... 

Nanostructured materials have attracted much attention in recent decades. Nowadays, there are numerous nanomaterials with several applications. The ultrasonic spray pyrolysis method is a cost-effective and adaptable technique based on an aerosol process for synthesizing nanoparticles and depositing thin films. The technique is capable of synthesizing metal, oxide, and composite nanomaterials with precisely controllable morphologies and chemical compositions using metal salts in aqueous solvents. More importantly, it is popular, as evident from the growing number of studies being conducted on the technique. Here, we review studies conducted on basic principles and applications of the... 

High-energy milling technique was used to synthesize Al-10 wt.%AlN-nanostructured composite powder in a planetary ball-mill under argon atmosphere up to 25 h. To show the role of AlN particles, process was conducted for monolithic aluminum. The changes in powder characteristics were investigated by time. Microstructure of powders was studied after different milling times by scanning electron microscope (SEM). The morphological evolutions showed that relative equiaxed powder could be synthesized after 25 h milling. Structural analysis was performed by X-ray diffraction method (XRD) to determine the grain sizes and lattice strain. Furthermore, particle size analysis (PSA) revealed the... 

We studied the effects of the surrounding liquid environment on the size and optical properties of silver nanoparticles prepared by laser ablation by a pulsed Nd:YAG laser operated at 1.064 nm. The silver targets used were kept in acetone, water and ethanol. TEM observations and optical extinction were employed for characterization of particle size, shape and optical properties, respectively. Nano silver in acetone showed a narrow size distribution with a mean size of 5 nm and the colloidal solution was stable. In deionised water a rather narrow size distribution with a mean size of 13 nm was observed and nanoparticles were precipitated slowly after about two weeks. In ethanol, a broadening... 

Light scattering design in dye and quantum dot sensitized solar cells is one of the main concerns in enhancing their light harvesting efficiency, and also in improving their power conversion efficiency. Herein, we present a theoretical analysis to calculate the dependence of the light scattering efficiency in dye solar cells that have employed scattering agents with various sizes and morphologies incorporated in nanostructured photoanodes with different designs. Various isotropic and anisotropic nanostructures, including filled and hollow spheres, spherical voids, nanowires and hollow fibres in a size range of 100 nm to 900 nm, have been considered as scattering centres. The scattering... 

The fabrication of strong photocatalysts applied to the degradation of organic pollutants is necessary in environmental applications. In a single-stage method, acetate precursor and poly vinyl pyrolydine are used to produce ZnO nanostructures with various morphologies in annealing temperatures ranging from 300 °C to 900 oC. The physical properties of the prepared nanostructures were characterized by SEM, XRD and PL spectroscopy. The SEM images exhibit a variety of the as-prepared hexagonal zinc oxides including wires, rods, particles and porous network of welded particles of ZnO nanoparticles. The results of the photocatalytic degradation of methylene blue as an organic dye in aqueous... 

A novel nanocomposite of ZnO-PbO with flower-like nanostructure was fabricated from zinc acetate and lead nitrate as principle raw materials via an in situ process. The novelty of this study consists in the use of a common approach for fabricating of ZnO and PbO nanoparticles simultaneously. From these experiments the conclusion might be drawn that Zn(NH4) 2 4+ ions and Pb(OH)2 act as precursors for the nucleation and growth of ZnO and PbO respectively under microwave irradiation. The precursors formation were carried at two stages: reaction between zinc ions and lead nitrate with ammonium ion and hydroxide sodium respectively. The average crystalline size of Zno and PbO has been analysed by... 

Superparamagnetic zinc ferrite spinel-graphene nanostructures were synthesized as potential therapeutic agents in the magnetic targeted photothermal therapy of cancer and/or drug delivery. The global temperature of the solution and the local temperature at the nanoparticle (NP) surface determine the protein corona composition/content, which in turn affects the biological effects of NPs and the corresponding physiological responses. Therefore, it is rational to hypothesize that spinel-graphene nanostructures may have distinct protein corona compositions and contents, and therapeutic and toxic effects under laser irradiation. To assess this hypothesis, the effects of laser irradiation on the... 

Quasi-3D plasmonic nanostructures consisting of a metallic film perforated as an array of nanoholes, separated by a gap from a nanodisk array, are theoretically investigated under plane wave illumination with transverse electric and transverse magnetic polarizations. The results are compared with the results of a simple nanodisk array. A full discussion involving the couplings between plasmon resonance in nanodisks, surface plasmon polaritons on the interfaces of metallic film, and different diffractive grating orders that contribute in the couplings will be presented. The large difference between the plasmon behavior of the nanodisk array alone and nanodisk array in the presence of nanohole... 

In this study, the hardness inhomogeneity of billets during multi-passes of equal channel angular pressing (ECAP) at elevated temperatures is investigated and the effect of large strain deformation during ECAP on the hardness inhomogeneity characteristics due to dynamic aging of aluminum 6061 under a variety of temperatures and ram speed was studied by TEM and hardness measurements. The hardness results showed that the hardness distribution is more homogenous after four passes using the pressing route Bc. However, when the deformation temperature was considered, performing ECAP at 100 C may provide the most homogeneous microstructure after multi-pressing as long as the total number of... 

TiO2 nanostructures with different morphologies (spherical, tube, leaf-like and flower-like particles) were synthesized via a facile hydrothermal process. Polycaprolactone (PCL)/10 vol.% TiO2 nanocomposites were prepared by solvent casting methods. In vitro bioactivity of the nanocomposite films was examined by immersion in the simulated body fluid (SBF) for up to 28 days. It was found that the morphology of titania nanostructures significantly influence the in vitro bioactivity of PCL/TiO 2 nanocomposites. This observation was attributed to the amount of anatase phase and the specific surface area of the TiO2 nanostructures, which provide high surface exposure to SBF